Tektronix TLA7000 Series User manual

TLA7000 Series
Logic Analyzers
Installation Manual
www.tektronix.com
071-1747-03

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

Warranty 2
Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1)
year from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its
option, either will repair the defective product without charge for parts and labor, or will provide a replacement
in exchange for the defective product. Parts, modules and replacement products used by Tektronix for warranty
work may be new or reconditioned to like new performance. All replaced parts, modules and products become
the property of Tektronix.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of
the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible
for packaging and shipping the defective product to the service center designated by Tektronix, with shipping
charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within
the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping
charges, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage
resulting from attempts by personnel other than Tektronix representatives to install, repair or service the product;
b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any damage
or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or
integrated with other products when the effect of such modification or integration increases the time or difficulty
of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE
AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.
TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Warranty 9(b)
Tektronix warrants that the media on which this software product is furnished and the encoding of the programs on
the media will be free from defects in materials and workmanship for a period of three (3) months from the date of
shipment. If any such medium or encoding proves defective during the warranty period, Tektronix will provide
a replacement in exchange for the defective medium. Except as to the media on which this software product is
furnished, this software product is provided “as is” without warranty of any kind, either express or implied.
Tektronix does not warrant that the functions contained in this software product will meet Customer’s requirements
or that the operation of the programs will be uninterrupted or error-free.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration
of the warranty period. If Tektronix is unable to provide a replacement that is free from defects in materials and
workmanship within a reasonable time thereafter, Customer may terminate the license for this software product
and return this software product and any associated materials for credit or refund.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TEKTRONIX’ RESPONSIBILITY TO REPLACE DEFECTIVE MEDIA OR REFUND CUSTOMER’S
PAYMENT IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH
OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX
OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Table of Contents
General Safety Summary ........................................................................................ vii
Service Safety Summary.......................................................................................... ix
Environmental Considerations .................................................................................... x
Preface.............................................................................................................. xi
TLA7000 Series Logic Analyzers .......................................................................... xi
Documentation............................................................................................... xiii
Basic Installation ................................................................................................... 1
Check the Shipping List....................................................................................... 1
Site Considerations ............................................................................................ 1
Portable Mainframe Site Considerations............................................................... 1
Benchtop Mainframe Site Considerations.............................................................. 2
Support Hardware Site Considerations................................................................. 2
Installing the Bracket Kit .................. .................. ................................................. 2
Chassis Ground Connections................................................................................. 3
Mainframe Configurations.................................................................................... 4
First Time Setup Considerations ........................................................................ 4
Connecting to a Network................................................................................. 5
Networking Overview.................................................................................... 5
Network Security ......................................................................................... 6
First Time Network Setup................................................................................ 7
Preset IP Addresses....................................................................................... 9
Instrument Installations ...................................................................................... 10
Stand-alone Installation (Portable Mainframe)....................................................... 10
Network Configuration Overview...................................................................... 11
Stand-alone Installation (Benchtop Mainframe)...................................................... 11
Private LAN (Benchtop Mainframe) .................................................................. 15
Corporate LAN (Benchtop Mainframe)............................................................... 19
Setting up Multiple Mainframe Configurations ........................................................... 24
Expanded System (Two Mainframes) ................................................................. 24
Expanded System (Three to Eight Mainframes)...................................................... 26
Installing the TLA Application Software on a PC .......................... .................. ............ 29
Controlling the Logic Analyzer Remotely ........... .................. .................. .................. 30
Start the TLA Server on the Mainframe............................................................... 30
Connect to the Mainframe .............................................................................. 31
Changing the TLA7016 Factory Network Settings ............ ...................................... 32
Run the TLA Application Offline on a PC............................................................ 34
Networking Tips & Troubleshooting ....................................................................... 35
Connecting to the Mainframe........................................................................... 35
Multi-mainframe Systems............... ................................................ ................ 36
TLA7000 Series Logic Analyzers Installation Manual i

Table of Contents
Adding Location Information for the Connection Dialog Box ..................................... 39
TLA7012 Server Control................................................................................ 39
Installing Modules .............. ...................... .................. ...................................... 41
Logical Address Switches............................................................................... 41
Installing Modules in the Portable Mainframe............ .............. .............. ................ 43
Installing Modules in the Benchtop Mainframe ............................ .............. ............ 43
Covering Empty Slots ................................................................................... 44
Connecting Accessories...................................................................................... 45
Connecting Accessories to the TLA7000 Series ..................................................... 45
Additional Accessory Connection Information......... .......... ........................ .......... .. 47
Connecting Probes............................................................................................ 48
Connecting Probes to the Logic Analyzer Module................................................... 48
Configuring and Connecting the Pattern Generator Probes ......................................... 49
First Time Operation ......................................................................................... 49
Turning the Logic Analyzer On ........................................................................ 50
Turning on Expansion Mainframes .................................................................... 50
Turning off the Mainframes............................................................................. 50
Performing the Incoming Inspection ....................................................................... 50
Checking the P68xx and P69xx Logic Analyzer Probes (Optional)................................ 51
Checking the P64xx Logic Analyzer Probes (Optional)............................................. 51
Checking the P624x Oscilloscope Probes (Optional) .... .......... .................................. 52
Checking the P647x Pattern Generator Probes (Optional) .......................................... 52
Checking the TLA7000 Mainframe (Optional)....................................................... 52
Backing Up User Files ....................................................................................... 52
Removing the Replaceable Hard Disk Drives............................................................. 52
Connecting Probes to the Target System................................................................... 53
Merging Modules.................................................................................................. 55
Logic Analyzer Merging Rules.............................................................................. 56
TLA7PG2 Pattern Generator Module Merging Rules.................................................... 57
Merge Procedure.............................................................................................. 57
Merging TLA7Axx or TLA7NAx Logic Analyzer Modules ............................................ 58
Unmerging TLA7Axx or TLA7NAx Logic Analyzer Modules......................................... 62
Merging TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules ............................................. 63
Two-Way Logic Analyzer Merge Procedure.......................................................... 63
Three-Way Logic Analyzer Merge Procedure........................................................ 67
Storing the Logic Analyzer Module Merge Cable ................................................... 68
Product Overview ................................................................................................. 71
Front Panel Controls.......................................................................................... 71
TLA7000 Series External Connectors...................................................................... 71
Connecting an External Display........................................................................ 72
ii TLA7000 Series Logic Analyzers Installation Manual

Table of Contents
Restoring and Reinstalling Software ........ .................................. .......... ........................ 73
Reinstalling the Hard Disk Image............. ........................ ........................ .............. 73
Backing Up Files......................................................................................... 73
Installing the Operating System and TLA Application Software..................... .............. 74
Reinstalling the TLA Application Software ... .................................................. .......... 76
Installing the TPI Remote Operation Software ................ .............. .............. ................ 76
Upgrading or Restoring Firmware.......................................................................... 77
Upgrading Firmware on TLA7Axx or TLA7NAx Logic Analyzer Modules ..................... 78
Upgrading Firmware on TLA7Lx/Mx/Nx/Px/Qx/ Dx/7Ex Modules .............................. 79
Upgrading Firmware on TLA7PG2 Pattern Generator Modules ................................... 83
Upgrading Firmware on the Interface Module and the TL708EX TekLink 8-Port Hub . ........ 85
Appendix A: Mainframe Power Information................................................................... 87
Appendix B: User Service Procedures .......................................................................... 89
Service Offerings ............................................................................................. 89
Warranty Repair Service ................................................................................ 89
Calibration and Repair Service......................................................................... 89
General Care .................................................................................................. 89
Preventive Maintenance...................................................................................... 89
Cleaning the Flat Panel Display........................................................................ 90
Exterior Surfaces......................................................................................... 90
In Case of Problems .......................................................................................... 91
Diagnostics ............................................................................................... 91
Software Problems....................................................................................... 91
Hardware Problems...................................................................................... 91
Repacking for Shipment ..................................................................................... 92
Appendix C: Accessories & Options............................................................................ 93
Accessories.................................................................................................... 93
Options......................................................................................................... 95
Field Kit Options.............................................................................................. 98
Appendix D: TLA7000 Network Installation Site Survey .................................................... 99
Index
TLA7000 Series Logic Analyzers Installation Manual iii

Table of Contents
List of Figures
Figure i: TLA7012 Portable Mainframe....................................................................... xii
Figure ii: TLA7016 Benchtop Mainframe (with user-supplied PC controller)............................ xiii
Figure 1: Bracket kit for the TL708EX Hub, TLA7PC1 controller and GbE switch installed on a
TLA7016 ....................................................................................................... 3
Figure 2: Location of the ground connection on the TLA7000 logic analyzers............................. 4
Figure 3: Network switch.......................................................................................... 9
Figure 4: TLA7PC1 Benchtop PC Controller................................................................... 9
Figure 5: Setting the IP address................ .................................................... .............. . 9
Figure 6: Portable mainframe setup (up to two modules)..................................................... 11
Figure 7: Benchtop mainframe setup (up to six modules) .................................................... 11
Figure 8: LAN Connection dialog box.......................................................................... 12
Figure 9: IP Properties dialog box............................................................................... 13
Figure 10: TLA Connection dialog box......................................................................... 14
Figure 11: TLA Network Search dialog box ................................................................... 14
Figure 12: Benchtop mainframe private LAN setup (up to six modules)................................... 15
Figure 13: LAN Connection dialog box ........................................................................ 16
Figure 14: IP Properties dialog box ............................................................................. 17
Figure 15: TLA Connection dialog box......................................................................... 18
Figure 16: TLA Network Search dialog box ................................................................... 18
Figure 17: Benchtop mainframe corporate LAN setup (up to six modules) ................................ 19
Figure 18: LAN Connection dialog box ........................................................................ 20
Figure 19: IP Properties dialog box ............................................................................. 21
Figure 20: TLA Connection dialog box......................................................................... 22
Figure 21: TLA Network Search dialog box ................................................................... 22
Figure 22: Expanded benchtop system with TekLink cable (up to 12 modules) ........................... 24
Figure 23: Two instrument configuration....................................................................... 25
Figure 24: Expanded benchtop system with TL708EX Hub (up to 48 modules) .......................... 26
Figure 25: TL708EX Hub and TekLink cable.................................................................. 27
Figure 26: TLA Network Search dialog box ................................................................... 28
Figure 27: Instrument search results ............................................................................ 29
Figure 28: TLA Connection dialog box......................................................................... 31
Figure 29: TLA Network Search dialog box ................................................................... 32
Figure 30: TLA Configuration dialog box...................................................................... 33
Figure 31: Make changes to the TLA network settings ... .......... ........................ .......... ........ 34
Figure 32: Example of the ping command...................................................................... 35
Figure 33: Example of the tracert command ................................................................... 36
Figure 34: TLA Network Search dialog box ................................................................... 37
Figure 35: TLA Connection dialog box, search results ....................................................... 38
iv TLA7000 Series Logic Analyzers Installation Manual

Table of Contents
Figure 36: TLA System Properties dialog box................................................................. 39
Figure 37: TLA Server Properties dialog box.................................................................. 40
Figure 38: Logical address switches (set to address FF)...................................................... 42
Figure 39: Installing modules .................... ...................... ...................... .................... 44
Figure 40: Installing panel covers on the portable mainframe ................. .............................. 45
Figure 41: Installing panel covers on the benchtop mainframe .......................................... .... 45
Figure 42: TLA7012 accessories connections.................................................................. 46
Figure 43: TLA7016 accessories connections.................................................................. 47
Figure 44: Connecting the P69xx logic analyzer probes to the TLA7Axx logic analyzer module....... 48
Figure 45: Connecting the P64xx logic analyzer probes to the TLA7Lx/Mx/Nx/Px/Qx logic analyzer
modules........................................................................................................ 49
Figure 46: TLA7000 On/Standby switch locations............................................................ 50
Figure 47: Accessing the replaceable hard disk drives........................................................ 53
Figure 48: Location of modules in a merged system.......................................................... 58
Figure 49: Removing the merger connector assembly from the module.................................... 59
Figure 50: Connecting modules in a merged set............................................................... 60
Figure 51: Installing the merged module set in the mainframe................... ............................ 61
Figure 52: Removing the cover.................................................................................. 64
Figure 53: Feeding the merge cable through the cover........................................................ 65
Figure 54: Seating the cover on the chassis .................................................................... 66
Figure 55: Lining up the two modules .......................................................................... 67
Figure 56: Positioning the merge cable before installing the cover.............................. .......... .. 68
Figure 57: Portable mainframe front panel..................................................................... 71
Figure 58: TLA7000 Series external connectors............................................................... 72
Figure 59: Flash programming pins............................................................................. 81
TLA7000 Series Logic Analyzers Installation Manual v

Table of Contents
List of Tables
Table i: Windows Software Support Matrix.................................................................... xi
Table ii: Related Documentation ............................................................................... xiv
Table 1: Mainframe Network Configurations ................................................................... 5
Table 2: First time network setup................................................................................. 8
Table 3: Preset IP addresses...................................................................................... 10
Table 4: Additional accessory connection information.................... ........................ ............ 47
Table 5: TLA user file suffixes................................................................................... 73
Table 6: BIOS Boot settings for reinstalling software from the CD-ROM ........... ...................... 75
Table 7: TLA firmware files...................................................................................... 82
Table 8: Power for instrument modules......................................................................... 87
Table 9: Standard accessories, portable mainframe............................................................ 93
Table 10: Standard accessories, benchtop mainframe......................................................... 93
Table 11: Optional accessories, portable mainframe .......................................................... 94
Table 12: Optional accessories, benchtop mainframe......................................................... 94
Table 13: Instrument Options .................................................................................... 95
Table 14: Power Cords............................................................................................ 96
Table 15: Options for TLA7NAx Modules..................................................................... 96
Table 16: Options for TLA7AAx Modules..................................................................... 97
Table 17: Options for TLA7ABx Modules..................................................................... 98
vi TLA7000 Series Logic Analyzers Installation Manual

General Safety Summary
General SafetySummary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions related to operating the system.
To Avoid Fire or Personal
Injury
Use Proper Power Cord. Use only the power cord specified for this product and
certified for the country of use.
Connect and Disconnect Properly. Do not connect or disconnect probes or test
leads while they are connected to a voltage source.
Ground the Product. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
Connect the probe reference lead to earth ground only.
Power Disconnect. The power cord disconnects the product from the power source.
Do not block the power cord; it must remain accessible to the user at all times.
Do Not Operate Without Covers. Do not operate this product with covers or panels
removed.
Do Not Operate With Suspected Failures. If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Avoid Exposed Circuitry. Do not touch exposed connections and components
when power is present.
Use Proper Fuse. Use only the fuse type and rating specified for this product.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Provide Proper Ventilation. Refer to the manual’s installation instructions for
details on installing the product so it has proper ventilation.
TLA7000 Series Logic Analyzers Installation Manual vii

General Safety Summary
TermsinthisManual These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
Symbols and Terms on the
Product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read
the marking.
WARN IN G i ndicates an injury hazard not immediately accessible as you
read the marking.
CAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
viii TLA7000 Series Logic Analyzers Installation Manual

Service Safety Summary
Service Safety Summary
Only qualified personnel should perform service procedures. Read this Service
Safety Summary and the General Safety Summary before performing any service
procedures.
Do Not Service Alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect Power. To avoid electric shock, switch off the instrument power, then
disconnect the power cord from the mains power.
UseCareWhenServicingWithPowerOn. Dangerousvoltagesorcurrentsmay
exist in this product. Disconnect power, remove battery (if applicable), and
disconnect test leads before removing protective panels, soldering, or replacing
components.
To avoid electric shock, do not touch exposed connections.
TLA7000 Series Logic Analyzers Installation Manual ix

Environmental Considerations
Environmental Considerations
This section provides information about the environmental impact of the product.
Product End-of-Life
Handling
Observe the following guidelines when recycling an instrument or component:
Equipment Recycling. Production of this equipment required the extraction and
use of natural resources. The equipment may contain substances that could be
harmful to the environment or human health if improperly handled at the product’s
end of life. In order to avoid release of such substances into the environment and
to reduce the use of natural resources, we encourage you to recycle this product
in an appropriate system that will ensure that most of the materials are reused or
recycled appropriately.
This symbol indicates that this product complies with the European Union’s
requirements according to Directive 2002/96/EC on waste electrical and
electronic equipment (WEEE). For information about recycling options, check the
Support/Service section of the Tektronix Web site (www.tektronix.com).
Mercury Notification. This product uses an LCD backlight lamp that contains
mercury. Disposal may be regulated due to environmental considerations.
Please contact your local authorities or, within the United States, the Electronics
Industries Alliance (www.eiae.org) for disposal or recycling information.
Restriction of Hazardous
Substances
This product has been classified as Monitoring and Control equipment, and is
outside the scope of the 2002/95/EC RoHS Directive. This product is known to
contain lead, mercury, and hexavalent chromium.
xTLA7000 Series Logic Analyzers Installation Manual

Preface
This manual contains information needed to install your Tektronix logic analyzer
and related accessories.
To prevent personal injury or damage consider the following requirements before
attempting service:
The procedures in this manual should be performed only by qualified service
personnel.
Read the General Safety Summary and Service Safety Summary found at
the beginning of this manual.
Be sure to follow all warnings, cautions, and notes in this manual.
TLA7000 Series Logic Analyzers
The TLA7000 Series Logic Analyzers are comprised of a 2-module portable
mainframe (TLA7012), and a 6-module benchtop mainframe (TLA7016).
The TL708EX TekLink 8-Port Hub) and a local area network (LAN) gigabit
(Gb) switch expand the system and connect it to your network. A dedicated PC
controller (TLA7PC1) is also available, or you can load the application software
on your PC.
The logic analyzers are built upon the Microsoft Windows operating system
which allows you to install PC-compatible, third-party hardware and software
on the instrument.
The user interface operates under the Microsoft © Windows operating system.
Microsoft recommends the following to ensure your instrument is protected:
Use an internet firewall.
Install operating system updates regularly.
Use up-to-date antivirus software.
Table i: Windows Software Support Matrix
Ships with WinXP
pre-installed 1
Field upgrade to
WinXP 2
Run TLA V5.1 on
Windows 2000
TLA7012
TLA7PC1 3
Yes N/A N/A
TLA5000 Yes Yes Yes
1WinXP is pre-activated. No activation is required when you first receive your instrument. Activation may be
required if you restore the hard disk image from the CD.
2The WinXP upgrade is done via the Hard Disk Image supplied by Tektronix. There are different Hard Disk Images
supplied, depending on your motherboard. After the upgrade, you will need to activate WinXP.
3The TLA7PC1 is a PC controller that is sold by Tektronix for use with the TLA7016 benchtop mainframe.
TLA7000 Series Logic Analyzers Installation Manual xi

Preface
The TLA7000 series logic analyzers combine high-performance logic analyzer
and pattern generator modules with optional application modules or an external
Tektronix oscilloscope.
Figure i: TLA7012 Portable Mainframe
Several logic analyzer modules are available in various combinations of channel
width, state speed, and memory depth. All of the logic analyzer modules provide
simultaneous state and timing measurements through a single probe.
xii TLA7000 Series Logic Analyzers Installation Manual

Preface
Figure ii: TLA7016 Benchtop Mainframe (with user-supplied PC controller)
Documentation
The following table lists related documentation available for your logic analyzer.
The documentation is available on the TLA Documentation CD and on the
Tektronix Web site (www.Tektronix.com).
For documentation not specified in the table, contact your local Tektronix
representative.
TLA7000 Series Logic Analyzers Installation Manual xiii

Preface
Table ii: Related Documentation
Item Purpose Location
TLA Quick Start User Manual High-level operational overview
Online Help In depth operation and UI help
Installation Quick Reference Cards High-level installation information
Installation Manuals Detailed first-time installation information
XYZs of Logic Analyzers Introduction to logic analyzer basics
TLA Product Specifications Complete list of TLA product
specifications
TPI.NET Documentation Detailed information for controlling the
logic analyzer using .NET
Field upgrade kits Upgrade information for your logic
analyzer product
Optional Service Manuals Self-service documentation for modules
and mainframes
xiv TLA7000 Series Logic Analyzers Installation Manual

Basic Installation
This chapter describes all of the steps needed to install your Tektronix logic
analyzer and its related accessories. It is written from the perspective that you
purchased most of the items uninstalled and you intend to install all of the pieces.
If you purchased a logic analyzer with modules already installed, you should still
review this chapter and perform the steps that apply to your situation.
Check the Shipping List
Verify that you have received all of the parts of your logic analyzer using the
shipping list and the accessories list. (See page 93, Accessories.) Also check
for the following:
Power cords are correct for your geographical area
Correct probes and modules
Standard accessories
All optional accessories that you ordered
CAUTION. This notice applies only to the TLA7016 Benchtop Mainframe with
Option A6. (See Table 14 on page 96.)
A special high-current power cord set is provided and is for use exclusively with
this product.
Site Considerations
Read this section before installing the logic analyzer. This section describes
site considerations, power requirements, and ground connections for your logic
analyzer.
CAUTION. Allow a 15.3 cm (6-in) clearance at the top, back, and sides of the
instrument to ensure proper cooling. Inadequate clearances can cause the
instrument to overheat and shut down.
Portable Mainframe Site
Considerations
You can use the portable mainframe on a bench or on a cart in the normal position
(on the bottom feet). The front feet extend to give a better view of the instrument
display. You can also mount the mainframe in an instrument rack.
TLA7000 Series Logic Analyzers Installation Manual 1

Basic Installation
Benchtop Mainframe Site
Considerations
The Benchtop Mainframe is designed to operate on a bench, on a cart, or
in a rackmount environment. If you need to stack more than two benchtop
mainframes, install the mainframes in a rack. Refer to the online help under
Standard and Optional Accessories for rackmount kit part numbers.
WARNING. To avoid personal injury, never lift or move a benchtop mainframe
by yourself. The size and weight of the mainframe requires two people to lift or
move it.
Do not stack more than one benchtop mainframe on top of another benchtop
mainframe. Always use a rackmount kit to ensure that the mainframes are secure
and will not fall.
Support Hardware Site
Considerations
The TLA7PC1 Benchtop PC Controller, TL708EX Hub, and GbE switch units
can operate separately on your workbench, equipment rack, or cart, or you can
mount them to your benchtop mainframe using the brackets provided with the
benchtop mainframe.
Installing the Bracket Kit
If you are using your benchtop logic analyzer outside of a rackmount environment,
you can use the bracket kit to mount the PC controller, GbE switch, and TL708EX
Hub together with your benchtop mainframe. (See Figure 1 on page 3.) Use
the following procedure:
1. Place the components you want to mount on top of the logic analyzer, putting
the heaviest units lowest in the stack.
2. A left and right-side bracket is included in the kit, along with mounting
screws. Align one of the brackets to the frame of the logic analyzer so that
the bracket reaches all of the components, but minimize the extra bracket
height above the top unit.
3. Fasten the bracket to the logic analyzer with one of the 8-32, P2 Pozidriv
screws preinstalled on the bracket.
4. Repeat steps 2 and 3 for the bracket on the other side of the logic analyzer.
5. If necessary, relocate the instrument brackets on the components you are
mounting. For example, the brackets on the TL708EX Hub come mounted to
the back of the unit, with installation instructions on the bottom of the unit.
6. Using the 10-32, P2 Pozidriv screws preinstalled on the brackets, fasten the
components to the brackets.
2 TLA7000 Series Logic Analyzers Installation Manual