Tektronix PHASER 240 User manual

D Regulatory Information
D-4 Phaser 240 Color Printer
Material Safety Data Sheets
Proper management of environmental resources protects the well-being of our
employees, customers, shareholders, and the communities we are a part of
worldwide.
Tektronix establishes and maintains sound environmental management practices to
accomplish this goal and to assure compliance with the laws, regulations, and orders
of the responsible governmental authorities wherever Tektronix and its subsidiaries
operate.
Tektronix, Incorporated is complying with government regulations by providing
Material Safety Data Sheets for our products.
Color Printing and Imaging Division
Tektronix, Incorporated
Section I Ð Product identiÞcation
Trade name and Tektronix part number:
Black Transfer Roll 016-1188-00
3-Color Transfer Roll 016-1262-00
ColorCoatª Transfer Roll 016-1222-00
Product use: Used in Phaser 240 color printers.
Section II Ð Information on ingredients
Hazardous Ingredients: None.
Ingredients CAS No.
Polyester Þlm* 25038-59-9
ParafÞn wax 8002-74-2
Coloring material
Resin
* Polyethylene Terephthalate

Regulatory Information D
User Manual D-5
Section III Ð Hazards identiÞcation
Potential Health Effects:
Eyes: Non-irritating.
Skin: Non-irritating.
Inhalation: Not considered a route of exposure.
Ingestion: Not considered a route of exposure.
Section IV Ð First aid measures
This material is a coated Þlm. No medical emergency is foreseen when
product is used as intended.
Section V Ð Fire Þghting measures
Flammable Properties:
Flash point: Not applicable.
Fire & explosion hazards: The Þlm will burn when in contact with Þre.
Products of combustion include carbon dioxide, carbon monoxide, and
water which are similar to combustion of other products found in an ofÞce
setting.
Section VI Ð Accidental release measures
Spill Or Leak: This section is not applicable to this product, which is a dry
Þlm.
Section VII Ð Handling and storage
Handling: No special precautions necessary.
Storage: Store away from excessive heat.

D Regulatory Information
D-6 Phaser 240 Color Printer
Section VIII Ð Exposure control Ð personal protection
Exposure Guidelines: No PEL or TLV established.
Engineering Controls: No special controls necessary.
Eye Protection: None needed.
Skin Protection: None needed.
Section IX Ð Physical and chemical properties
Appearance: Coated, ßexible Þlm.
Odor: None.
Solubility: Not soluble in water.
Section X Ð Stability and reactivity
Stability: Stable.
Incompatibility With Other Materials: None expected.
Hazardous Polymerization: Not applicable.
Section XI Ð Toxicological information
No data available.
Section XII Ð Ecological information
No data available.
Section XIII Ð Disposal considerations
Dispose in accordance with all Federal, State or Local regulations. This Þlm
is not considered a hazardous waste under RCRA 40 CFR 261.
Section XIV Ð Transport information
D.O.T.: Not a hazardous material for DOT shipping.

Regulatory Information D
User Manual D-7
Section XV Ð Regulatory information
SARA Title III:
311/312 Hazard Categories: None applicable.
313 Reportable Ingredients: None.
California Prop. 65: None of the components of this Þlm appear on the
California Proposition 65 list of chemicals known to cause cancer or
reproductive toxicity.
Canadian WHMIS: The Þlm meets the requirements of a Òmanufactured
articleÓ under Canadian Workplace Hazardous Materials Information
System, and therefore no MSDS or label is required.
TSCA: All components of this Þlm are included in the Toxic Substances
Control Act inventory as veriÞed by our suppliers.
OSHA: This Þlm meets the deÞnition of an article under 29 CFR 1910.1200
Hazard Communication and therefore it is exempt from its requirements. We
are supplying this data sheet as a courtesy to our customers.
Section XVI Ð Other information
Original preparation date: 11/19/93 R.C.
Tektronix, Incorporated
P.O. Box 500
Chemical Documentation
Mail stop 55-769
Beaverton, Oregon 97077
Printer information: 1-800-835-6100
MSDS information: [phone]