Telecrane F21-E2 User manual

F21-E2 Industrial Radio Remote Controller
Installation & Operation Manual
Lee’s Hi-tech Enterprise. Co., Ltd
2012.1.5

Preface
Thank you for choosing Telecrane F21-E2 industrial radio remote controller.
This manual is used as a reference of F21-E2 remote. There are two parts for different
users, operator and technician. To avoid any unexpected machine or person accident or
harm occurs, before installation, start-up, and operation, please read carefully through
the manual and follow the regulation and, requirement.

1
Safety Considerations
This product and related documentation must be reviewed to
familiarize with safety markings and instructions before operation.
Safety Symbols The following symbols may be found on the remote control
or throughout the remote control’s documentation.
Refer to Manual
When product is marked with this symbol refer to
instruction manual for additional information.
High Voltage
Indicates presence of hazardous voltage. Unsafe
practice could result in severe personal injury.
Ground connection
For safety concern, it is obligated to have ground
connection
Warning
Denotes a hazard. Included text gives proper
procedures. Failure to follow instructions could result
in severe personal injury and/or property damage.
Caution
Denotes a hazard. Included text gives proper
procedures. Failure to follow instructions could result
in minor personal injury and/or properly damage.

2
Catalog
PART ONE. OPERATOR’S MANUAL ................................................................................... 4
CHAPTER 1. WARRANTY .......................................................................................... 4
1-1 Warranty .......................................................................................................... 4
1-2 Warranty period .............................................................................................. 4
1-3 Excluded Items ................................................................................................ 4
1-4 Remarks ........................................................................................................... 4
CHAPTER 2. PRECAUTIONS OF OPERATION .................................................... 5
2-1 Attention .......................................................................................................... 5
2-2 Precautions ...................................................................................................... 5
2-3 Procedures of emergency ............................................................................... 6
CHAPTER 3. STANDARD & OPTIONAL ACCESSORIES .................................. 7
3-1 Standard accessories ....................................................................................... 7
3-2 Optional accessories ....................................................................................... 7
CHAPTER 4. HOW TO START................................................................................... 8
4-1 F21-E2 transmitter & receiver deployment ................................................... 8
4-2 Operation ......................................................................................................... 8
CHAPTER 5. ROUTINE INSPECTION AND TROUBLESHOOTING.............. 9
5-1 Routine inspection .......................................................................................... 9
5-2 Fault Detection ................................................................................................ 9
5-3 LED Indication and troubleshooting ............................................................. 9
5-3-1 Fast flashing red light .................................................................................. 9
5-3-2 Slow flashing red light .............................................................................. 10
5-3-3 Constant red light ...................................................................................... 10
PART TWO. TECHNICIAN’S MANUAL ............................................................................ 11
CHAPTER 1. GENERAL CHARACTERISTIC ..................................................... 11
1-1 General Specifications .................................................................................. 11
1-2 Transmitter Specifications ............................................................................ 11
1-3 Receiver Specifications ................................................................................ 11
CHAPTER 2. INSTALLATION AND FUNCTION SETTING ........................... 11
2-1 Precautions during installation ..................................................................... 11
2-2 Transmitter installation instructions ............................................................ 12
2-3 Receiver Installation Instructions ................................................................ 12
2-3-1 Preparation for Installation ....................................................................... 12
2-3-2 Receiver installation order ........................................................................ 12
2-3-3 Receiver wiring diagram ........................................................................... 13
2-4 Receiver power transformer voltage selection and conversion ................. 13
2-5 Function Setting ............................................................................................ 14
CHAPTER 3. SOFTWARE AND COPY FUNCTIONS ......................................... 15
3-1 F21-E2 Software Installation ....................................................................... 15
3-2 How to start F21-E2 program ...................................................................... 15
3-3 How to operate F21-E2 program ................................................................. 16
CHAPTER 4. RAPID E-CARD COPY FUNCTIONS ............................................ 18
4-1 Steps of e-Card copy procedure ................................................................... 18

3
4-2 Multiple e-Card copy procedure .................................................................. 19
ANNEX: GLOSSARY OF FUNCTION SETTING ............................................................. 20

4
PART ONE. OPERATOR’S MANUAL
CHAPTER 1. WARRANTY
1-1 Warranty
Lee’s Hi-Tech Enterprises Co., Ltd. guarantees that this product meets
its published specifications at the time of shipment from the factory. Under
proper installation it should work as expected.
1-2 Warranty period
This equipment is warranted against defects in material and
manufacturing for a period of one year from the date of shipment. During
the warranty period, TELECRANE is responsible for necessary repairs as
long as the product can be proved to be defective.
For warranty service or repair this product must be returned to a
service facility designated by TELECRANE. Buyer will pay shipping
charges to TELECRANE while TELECRANE will pay return shipping
charges.
1-3 Excluded Items
This warranty does not include consumptive parts such as batteries,
fuses, buttons, and relays. Also this warranty does not cover defects caused
by improper installation, improper or insufficient maintenance, unauthorized
modification, and improper operation, ignorance of environmental
specifications, or improper software or interfacing.
1-4 Remarks
◎ No other warranty is expressed or implied, except for the above
mentioned.
◎ The remedies provided herein are the buyer’s sole and exclusive
remedies.
TELECRANE shall not be liable for any direct, indirect, special,
incidental or consequential damages.

5
CHAPTER 2. PRECAUTIONS OF OPERATION
2-1 Attention
◎ Please carefully read the manual before installing and operating this
device.
◎ Due to the complex nature of this equipment it is necessary to read the
entire manual before installation.
◎ Never dismantle the equipment by any unauthorized personnel, or
equipment may be damaged.
◎ This manual is for reference only. Pleases consult your distributor for
further assistance.
◎ The equipment has been strictly tested for quality before delivery from
our plant. However, this equipment must not be used in dangerous
situations or where damage may result.
◎ After operation, shut off main power to the crane, power to receiver,
and remove transmitter key.
◎ Transmitter should be placed in a safe area when not in use to avoid
accidental pressing of buttons.
◎ The crane should be equipped with main power relay, limit switch and
other safety devices.
◎ Don’t use equipment during lightening or high electrical interference
conditions.
◎ Make sure that the batteries are in good condition and power for
receiver is correct.
◎ Maintenance should only be done while the crane’s main power is off
to prevent electrical shock.
◎ The contents of this manual may be amended by the manufacturer
without notice.
◎ The manufacturer may introduce new functions to the equipment as
necessary; therefore, the descriptions may change.
2-2 Precautions
◎ Operating in an industrial facility is relatively dangerous; therefore,
operator must have taken the adequate trainings in using F21-E2
system.
◎ Those who operate the machine should be healthy and have good
judgment in regard to safety.

6
◎ Although the F21-E2 transmitter is so durable and resistant for the
fluctuating temperature, care still need be taken to prevent it from the
severe impact or pressure.
◎ During operation, if the power supply of the transmitter’s batteries is
insufficient, the transmitter will send out EMS signal first to de-
energize all of motion relays inside the receiver to stop crane’s
moving, and then the LED indicator on transmitter will flash in red
constantly. At this moment, the batteries need to be replaced and all of
four batteries should be replaced at the same time.
◎ If the severe interference occurred the equipment should be stopped at
once.
◎ Please take the batteries out when the equipment will not be used for a
long time.
◎ Be sure to know the "Procedures of Emergency" as follows.
2-3 Procedures of emergency
In case of an Emergency, please follow the steps below and ask the
distributor for service immediately.
1. Press "EMS" button.
2. Turn the key to "OFF" position and remove it.
3. Switch off the main power of crane.
4. Advise the distributor to find out the reason.

7
CHAPTER 3. STANDARD & OPTIONAL ACCESSORIES
3-1 Standard accessories
Please check out there are one transmitter and one receiver inside the
carton.
3-2 Optional accessories
F21-E2 Software CD & USB cable.

8
CHAPTER 4. HOW TO START
4-1 F21-E2 transmitter & receiver deployment
4-2 Operation
4-2-1 Pre-inspection
1. There are two e-cards for both transmitter and receiver. Please
make sure the e-card is right on its position.
2. Put two AA batteries on the release ribbon. And lock the battery
cover.
Note: Before placing the batteries, make sure the Rotary KEY is
on the OFF position
3. Turn the Rotary KEY into START position. (Or by setting the
mode of power on.)
e-card on the transmitter
Receiver wiring diagram
Emergency STOP pushbutton
LED Indicator
Rotary KEY switch
e-card on the receiver
Motion pushbutton