Teli CS8560D User manual

B/W CCD Camera
Model CS8560D
Operation Manual
Thank you for purchasing our BIW CCD camera. This operation manual contains many important information
such as how to use this product correctly and safely. Please read through this manual carefully. Aiter reading,
keep this manual by the side of this product for your future reference.
TOSHIBA TELl CORPORATION
BEFORE USE - GENERAL SAFETYINSTRUCTIONS
Read the following safety precautions carefully before using this product. These instructions contain
valuabable infomation on safe and proper use that will prevent harm and damage to the operator and other
persons. Make sure that you fully understand the following details (indications, graphic symbols) before
proceeding to the remaining sections inthis manual.
OWNER'S RECORD
Please fill in the blank below the model name and product serial number, which is found on bottom chassis
of your device. Keep this number for your record.
Indication definitions
I I
I Indication I Meaning I
This indicates the existence of a hazard that bodily injury(*2) or property damage(*3)
1 a CAUTION I rnay resuit from improper use.
WARNING
*1 Catastrophic bodily injury means loss of eyesight, bums (high and low temperatured), shock, fracture,
poisoning, etc. which leaves a sequela and repuire hospitalization or prolonged treatment.
This indicates the existence of a hazard that death or catastrophic bodily injury(*l)
rnay result from improper use.
*2 Bodily injury means injuries, burns and electric shock which does not require hospitalization or
prolonged treatment.
*3 Property damage means extended harm to home, household effects, domesticated animals, and pets
Graphic symbol defmitions
I Indication I Meaning
Do noto erate in laces with ossibility of becomingwet.
1 @ I This ma;cause firPandlor eleckshock.
Do notre air disassemble andlormodif b ourself.
This may:au;e fire andlor electric diochB: Biways Sure to contact your dealer for internal
repair, check and cleaning of the product.
Don't lace thin s ormaterials ontheunit.
IngresPof foreig:materials such as metallic things and liquid into the unit rnay cause a fire or
an electric shock.
This mark indicates a prohibited action that must not be carried out. The actual prohibited
action is indicated in the symbol or nearby graphically or described in text.
This mark indicates a mandatory action that must not be carried out. The actual instruction is
indicated in the symbol or nearby graphically or described in text.
Do notput the product in an unstable, slanting andlor vibrated place.
Drop andlor fail of the product rnay cause injury.
Do nottouch the ower cord orother connection cables during a thunderstorm.
1 @ 1 This might cause :ectric shock.
.Handling Precautions
WARNING
@I
Use the specified power supply.
Use of an unspecified power supply rnay result in fire or electric shock.
&
Stop operation immediately when any abnormality or defect occurs.
Use during an abnormal condition; such as emitting smoke, burning odors, damage from
dropping invasion of foreign objects, etc. may cause fire andlor electric shock. Be always Sure
to disconnectthe power plug from the electrical outlet (socket) at once and contact your dealer.
@
Do notbe handled rou hl dama ed fabricated bent forcefull uiled, twisted, bundled,
placed underheavy ob:ec: orhea:e;the power ;erd. connectiunnrable.
Otherwise, fire or electric shock rnay result.
a CAUTION
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device rnay not cause harmful interference, and (2) This device accept any interference received,
including interferencethat rnay cause undesired operation.
@
@
@
@
@
@
@
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference whenthe equipment is operated in a commercial environment. This equipment generates, uses,
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
rnay cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the User will be require to correct the interference at
his own expense.
Ask your dealer to perfom a periodical check and internal cleaning (approx. once every
five ears .
Dus;nsiA the product rnay cause fire andlor trouble. For check and cleaning CO,,please
consult your dealer.
Note the foilowing instructions when installing.
-Do not wrap the product in an inflammable material, such as cloth.
-Do not put the product in a narrow space, since the heat generated from the product may be
difficultto emanate.
If you do not follow the above, the heat generated by the product rnay cause fire.
Avoid settin in humid, smoky, vaporized or dusty places. A fire or an electric shock rnay
occur in sucz places.
This rnay cause fire andlor electric shock.
Do not utthe roduct in direct sunshine andlor high temperature.
TheteGeraturPinside the product rnay cause fire.
Use the s ecified DC ower cable orconnection cable.
Otherwisl a fire or anilectric shock may occur.
Turn OFFthe ower in the case of connection.
Turn OFFthe p0wer in the case of connection of power cable or connection cable.
Otherwise, an electric shock or a malfunction rnay occur.
Do not ex ose its camera head to an intensive li ht such as direct sunlight).
Otherwise5ts inner image pickup devze might get :am!ged.
Avoid short-circuitin si nal out ut.
merwise, a maihinct:on zayoccEr.
Avoid giving a strong shock against the camera body.
It might cause a breakdown or damage.
If your camera is used in a system where its camera connector is subjected to strong repetitive
shocks, its camera connector is possible to break down. If you intend to use your camera in
such a situation, if possible, bundle and fix a camera cable in the place near the camera, and do
nottransmit a shock to the camera connector.
DISCLAIMER (LIMITED WARRANTY)
We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the User in
any of the following cases;
Fire, earthquake or any other act of God; acts by third parties; misuse by the User, whether intentional or
accidental; use under extreme operating conditions.
Malfunction or non-function resulting in indirect, additional or consequential damages, including but not
limitedto loss of expected income and suspension of business activities.
Incorrentuse not in compliance with instructions in this instruction specifications and manual.
Malfunctions resulting from misconnection to other equipment.
Repairs or modifications made by the User or caused to be made by the User and carried out by an
unauthorized third party.
Notwithstanding the foregoing, Teli's liabilities shall not, in any circumstances, exceed the purchase
price ofthe product.
About the item which does not have a publication in the specifications and manual of this product, it
considers as the outside for a guarantee.
RESTRICTION FOR USE
Shouldthe equipment be used in the following conditions or environments, give consideration to safelty
measures and inform us of suchusage:
1. Use of the equipment in the conditions or environment contrary to those specified, or use
outdoors.
2. Use of the equipment in applications sxpected to cause potential hazard to people or propety, which
require special safety measures to be adopted.
This product can be used under diverse operating conditions. Determination of applicability of
equipment or devices concerned shall be determined after analysis or testing as necessary by the
designner of such equipment or devices, or personnel related to the specifications. Such designer or
personnel shall assure the performance and safety of the equipment or devices.
This product is not designed or manufactured to be used for control of equipment directly concerned
with human life
(* 1)or equipment relating to maintenance of of public serviceslfunctions involving
factors of safety (*2). Therefore, the product shall not be used for such applications.
(*I): Equipment directly concerned with human life refers to.
- Medical equipment such as life-support systems, equipment for prerating theaters.
- Exhaust control equipmentfor exhaust gases such as toxic fumes or smoke.
- Equipment mandatory to be installed by various laws and regulations such as the Fire Act or
Building Standard Law
- Equipment related to the above.
(*2) : Equipment relating to maintenance of public serviceslfunctions involving factors of safety refers
to.
- Traffic control systems for air transportations, railways, roads, or marine transportation
- Equipment for nuclear power generation
- Equipment related to the above
CAUTIONS ON USE
Carefully handle the units.
Do not drop, or give a strong shock or vibration to the camera. This rnay cause problems. Treat the
camera cables carefully to prevent cable problems, such as cable breakdown and loosened connections.
Operating ambient temperature and humidity.
Do not use the camera in places where temperature and humidity exceed the specifications. Picture
quality will lower and internal parts rnay be damaged.
Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places,
depending on the conditions of the object and the camera (for example when the gain is increased), noise
in the form of vertical strips or white dots rnay occur.This is not a malfunction.
Restriction forthe lens combination
This camera might form a ghost to image area depending on the combination of a lens and an
illumination with this camera. But this is not a failure of this camera. Therefore, please check the
combination ofthe lens and the illumination with this camera when use.
When mounting a lens, take extra caution so that the lens is not tilted, nor does flaw exist at the
lens-mount-screw part. Aiso check to confirmthat no dirt nor other foreign object is put inside
Improper mounting might cause the parts to become locked.
Do not shoot under intense light.
Avoid intense light such as spot light on part of the screen because it rnay cause blooming or smears. If
intense light falls on the screen, vertical stripes rnay appear on the screen, but this is not a malfunction.
Do not exposethe camera's image-pickup-plane to sunlight or other intense light directly.
Its inner CCD (charge-coupled device) might be damaged.
Moire
When thin stripe patterns are shot, stripe patterns that are not actually there (moire) rnay appears as
interference stripes. This is not a malfunction.
Undesirable noise
If the camera or the cables are located near something which emit strong magnetism or near something
which emit strong electric wave, undesirable noise rnay appear on the screen. In such a case, try to
change the location of the camera or the cable wiring.
Handling of the protection cap
When the camera is not in use, put a lens-cap onto the camera head for protection of the
image-pickup-plane.
When not using the camera for a longtime.
Stop supplying power for safety.
When cleaningthe camera
Aiwaysturn offthe power and clean with a piece of soft dry cloth.
To remove stubborn stains, use a soft cloth soaked in diluted acid-free detergent. Do not use alcohol,
benzine, thinner, etc. If used, coating and printed letters rnay be discolored.
In case the image-pickup-plane should be settled with fine dust, dirt, or scratched, ask your dealer for
technical advice.
Wastes of this product should be separated and discarded in compliance with the various national and
local ordinances.