Telikou BK-1200 User manual

TELIKOU Intercom System
BK-1200 Wireless Belt Pack
Instruction Manual
© TELIKOU Systems
All Rights Reserved

TELIKOU BK-1200 Wireless Belt Pack
1
I. Introduction
Thank you for choosing TELIKOU intercom product. We recommend you read through this manual
to better understand the functions of BK-1200 digital wireless belt pack.
BK-1200 digital wireless belt pack running on 2.4G free of license frequency.
II. Specification
MIC
Microphone Control Button
▲/▼
Volume Control
POWER
Power Switch
Low Battery & Code LED
Dual Color LED
MIC LED
Microphone status indicator
Vox
Null
Dyn
Microphone type selector
On: Dynamic
Off: Electret
Headset Connector
Pin1, Pin2: Microphone;
Pin3, Pin4: Earphone;
Pin5: Ground
III. Code Matching
Belt Pack Working Group
BK-1200 belt pack can work alone without main station.

TELIKOU BK-1200 Wireless Belt Pack
2
1. Select one belt pack as main station.
2. Hold ‘VOL+’ button then turn on the power for this belt pack.
3. When Power LED flashes slowly. Release the ‘VOL+’ button. This belt pack has set as main
station.
4. Select another belt pack.
5. Hold ‘VOL-’ button then turn on the belt pack power. When power LED flashes slow, release the
‘VOL-’ button.
6. System does the code matching automatically. Power LED flashes fast, then light constantly
means code matching has finished.
7. Repeat step 3 and 4 for rest belt pack.
8. Restart all the belt pack.
Note: After finishing Code Matching, Belt Pack have to be restart.
VI. Technical Specification
Working Frequency:
2.4G (433M / 868M / 915MHz are optional)
MAX Transmit Power:
20dBm
Belt Pack Battery:
3 x AA size battery
Belt Pack Working Current:
TX: max 130mA RX: max 50mA
DIMENSION:
180mm x 150mm x 70mm
WEIGHT:
0.15kg