Tellur TLL331321 User manual

WiFi Wall Plug
User Manual
TLL331321
Compatible with Alexa and Google Home
For other languages, please visit smart.tellur.com

Thank you for choosing Tellur!
To ensure an optimum performance and safety, please read this user
manual carefully before using the product. Keep this user manual safe
for future references.
2.TECHNICAL SPECIFICATIONS
Outlet type: Schuko
Voltage: AC 100-230V
Maximum load: 16A
Max power: 3000W
Grounding: Yes
Overload protection: Yes
Amazon Alexa: Yes, compatible
Google Assistant: Yes, compatible
Wireless frequency: 2.4GHz
WiFi standard: IEEE 802.11b/g/n
Security: WPA-PSK/ WPA2-PSK /WPA/WPA2/WEP/WPS2/WAPI
Encryption type: WEP/TKIP/AES
Standby consumption: 0.6W
Compatibility: Devices with Android 4.2 / iOS 8 or more recently
Working temperature: -15~80° C
Working Humidity: ≤80%
Package includes: WiFi Wall Plug / User Manual
Product dimensions: 86 x 86 x 43.5mm
Product weight: 160gr
1. PRODUCT DIAGRAM

3. INSTALL APP AND REGISTER AN ACCOUNT
Download the Tellur Smart App for both iOS and Android OS.
Scan the QR code to download Tellur Smart App
Once downloaded, the app will ask you to register your device. Enter
your email, select the country you live in and create a password for your
Tellur Smart account.

• Turn on the device you want to pair and make sure the LED light is
flashing quickly.
• Open the app, click ”Add Device” or "+". From the left menu,
choose “Electrical Engineering” and then, from the list, select
“Socket (WiFi)”.
• Select the WiFi network and enter the password of your WiFi
network. The WiFi must be 2.4GHz!
• Wait until the pairing is complete.
• Once connected, you can rename your device or click "Done"
4. ADDING A NEW DEVICE

Once Tellur Smart app is installed on your device and you have
added your smart device to your app you will be able to control it.
Failed to add device?
1. Make sure the device is powered on.
2. Check the WiFi connection of your phone.
3. Check if the device is in pairing mode.
Reset your smart device to enter pairing mode. Please refer to the "How
to reset device" section.
4. Check router or related:
If you use a dual-band router, select the 2.4GHz network to add the
device. You also need to enable the router's broadcasting function. Set
encryption method as WPA2-PSK and authorization type as AES or set
both on "auto".
5. Check if the WiFi signal is strong enough.
To maintain the signal strong, keep your router and the smart device as
close as possible.
6. Wireless mode should be 802.11.b/g/n
7. Make sure you do not exceed the maximum number of registered
devices supported by the app (150).
8. Check if the router's MAC filtering function is enabled. If so, remove
the device from the filter list and make sure the router is not prohibiting
the device connection.
9. Make sure the WiFi password entered in the app is correct.
EZ and AP connection modes:
Smart devices can be connected using two modes:
EZ represents the easiest way of connecting and enabling a smart
device. You will need to have the device, active wireless network
through with login password and Tellur Smart APP installed on a
smartphone / tablet.
AP mode can be used to configure and enable a smart device first with
the smartphone / tablet and later with the Wi-Fi network.
How to reset device?
Long press the reset button for 5 seconds until the LED indicator
flashes, indicating successful reset. If the LED indicator flashes quickly
(2 times per second), the device has entered EZ pairing mode. If the
indicator flashes slowly (one time /3 seconds), the device has entered
AP pairing mode. Under EZ mode, press the reset button for 5 seconds
until the LED flashes slowly, indicating the AP mode (and vice versa).
How to add device under EZ mode?
1. Make sure the LED indicator/light flashes quickly.
2. Make sure the phone is connected to WiFi.
3. Tap "Add device" in Tellur Smart app and enter the WiFi's network
password.
4. In the device list, select the device you want to pair and add it.
How to add device under AP mode?
1. Make sure the LED indicator/light flashes slowly.
2. Tap "Add device" in Tellur Smart app and select "AP mode" from the
top-right corner. Connect to the device's hotspot first and then proceed
to connect it to the WiFi network.
3. Tap "Next" to add device.
Can I control the device with 2G/3G/4G network?
When adding the device for the first time, the device and the phone
need to be connected to the same WiFi network. Once the device has
been successfully paired with Tellur Smart app, you can remotely
control it via 2G/3G/4G networks.
How can I share my device with family?
Open Tellur Smart app, go to "Profile" -> "Device sharing" -> "Sharing
sent", tap "Add sharing" and share the device with the added family
members.
Notice - users must install the Tellur Smart app on their device to see
shared devices.
How can I manage the devices shared by others?
Open App, go to "Profile" > "Device Sharing" > "Sharings Received",
then you can find the devices shared by other users. To delete a shared
device, swipe left.

Failed to add device?
1. Make sure the device is powered on.
2. Check the WiFi connection of your phone.
3. Check if the device is in pairing mode.
Reset your smart device to enter pairing mode. Please refer to the "How
to reset device" section.
4. Check router or related:
If you use a dual-band router, select the 2.4GHz network to add the
device. You also need to enable the router's broadcasting function. Set
encryption method as WPA2-PSK and authorization type as AES or set
both on "auto".
5. Check if the WiFi signal is strong enough.
To maintain the signal strong, keep your router and the smart device as
close as possible.
6. Wireless mode should be 802.11.b/g/n
7. Make sure you do not exceed the maximum number of registered
devices supported by the app (150).
8. Check if the router's MAC filtering function is enabled. If so, remove
the device from the filter list and make sure the router is not prohibiting
the device connection.
9. Make sure the WiFi password entered in the app is correct.
EZ and AP connection modes:
Smart devices can be connected using two modes:
EZ represents the easiest way of connecting and enabling a smart
device. You will need to have the device, active wireless network
through with login password and Tellur Smart APP installed on a
smartphone / tablet.
AP mode can be used to configure and enable a smart device first with
the smartphone / tablet and later with the Wi-Fi network.
How to reset device?
Long press the reset button for 5 seconds until the LED indicator
flashes, indicating successful reset. If the LED indicator flashes quickly
(2 times per second), the device has entered EZ pairing mode. If the
indicator flashes slowly (one time /3 seconds), the device has entered
AP pairing mode. Under EZ mode, press the reset button for 5 seconds
until the LED flashes slowly, indicating the AP mode (and vice versa).
How to add device under EZ mode?
1. Make sure the LED indicator/light flashes quickly.
2. Make sure the phone is connected to WiFi.
3. Tap "Add device" in Tellur Smart app and enter the WiFi's network
password.
4. In the device list, select the device you want to pair and add it.
How to add device under AP mode?
1. Make sure the LED indicator/light flashes slowly.
2. Tap "Add device" in Tellur Smart app and select "AP mode" from the
top-right corner. Connect to the device's hotspot first and then proceed
to connect it to the WiFi network.
3. Tap "Next" to add device.
Can I control the device with 2G/3G/4G network?
When adding the device for the first time, the device and the phone
need to be connected to the same WiFi network. Once the device has
been successfully paired with Tellur Smart app, you can remotely
control it via 2G/3G/4G networks.
How can I share my device with family?
Open Tellur Smart app, go to "Profile" -> "Device sharing" -> "Sharing
sent", tap "Add sharing" and share the device with the added family
members.
Notice - users must install the Tellur Smart app on their device to see
shared devices.
How can I manage the devices shared by others?
Open App, go to "Profile" > "Device Sharing" > "Sharings Received",
then you can find the devices shared by other users. To delete a shared
device, swipe left.

Failed to add device?
1. Make sure the device is powered on.
2. Check the WiFi connection of your phone.
3. Check if the device is in pairing mode.
Reset your smart device to enter pairing mode. Please refer to the "How
to reset device" section.
4. Check router or related:
If you use a dual-band router, select the 2.4GHz network to add the
device. You also need to enable the router's broadcasting function. Set
encryption method as WPA2-PSK and authorization type as AES or set
both on "auto".
5. Check if the WiFi signal is strong enough.
To maintain the signal strong, keep your router and the smart device as
close as possible.
6. Wireless mode should be 802.11.b/g/n
7. Make sure you do not exceed the maximum number of registered
devices supported by the app (150).
8. Check if the router's MAC filtering function is enabled. If so, remove
the device from the filter list and make sure the router is not prohibiting
the device connection.
9. Make sure the WiFi password entered in the app is correct.
EZ and AP connection modes:
Smart devices can be connected using two modes:
EZ represents the easiest way of connecting and enabling a smart
device. You will need to have the device, active wireless network
through with login password and Tellur Smart APP installed on a
smartphone / tablet.
AP mode can be used to configure and enable a smart device first with
the smartphone / tablet and later with the Wi-Fi network.
How to reset device?
Long press the reset button for 5 seconds until the LED indicator
flashes, indicating successful reset. If the LED indicator flashes quickly
(2 times per second), the device has entered EZ pairing mode. If the
indicator flashes slowly (one time /3 seconds), the device has entered
AP pairing mode. Under EZ mode, press the reset button for 5 seconds
until the LED flashes slowly, indicating the AP mode (and vice versa).
How to add device under EZ mode?
1. Make sure the LED indicator/light flashes quickly.
2. Make sure the phone is connected to WiFi.
3. Tap "Add device" in Tellur Smart app and enter the WiFi's network
password.
4. In the device list, select the device you want to pair and add it.
How to add device under AP mode?
1. Make sure the LED indicator/light flashes slowly.
2. Tap "Add device" in Tellur Smart app and select "AP mode" from the
top-right corner. Connect to the device's hotspot first and then proceed
to connect it to the WiFi network.
3. Tap "Next" to add device.
Can I control the device with 2G/3G/4G network?
When adding the device for the first time, the device and the phone
need to be connected to the same WiFi network. Once the device has
been successfully paired with Tellur Smart app, you can remotely
control it via 2G/3G/4G networks.
How can I share my device with family?
Open Tellur Smart app, go to "Profile" -> "Device sharing" -> "Sharing
sent", tap "Add sharing" and share the device with the added family
members.
Notice - users must install the Tellur Smart app on their device to see
shared devices.
How can I manage the devices shared by others?
Open App, go to "Profile" > "Device Sharing" > "Sharings Received",
then you can find the devices shared by other users. To delete a shared
device, swipe left.

Alexa integration:
1. Go to Home menu on Alexa app.
2. Select "Skills" / "Skills & Games".
3. Type Tellur Smart in the search bar.
4. Select Tellur Smart and click "Enable" to
activate Tellur Smart.
Enter your Tellur Smart account and password.
Now you have finished the integration with
Alexa.
Tellur Smart app is now skilled with Alexa and
you can vocally control the devices added in
Tellur Smart. Remember - if you rename your
smart devices, use a simple name that Alexa
can recognize.
To control your smart devices through Alexa,
use simple and concise voice commands.
To control your smart devices through Alexa,
use simple and concise voice commands. Here
is an example for bedroom lighting:
“Alexa, turn off bedroom light”
“Alexa, turn on bedroom light”
“Alexa, dim bedroom light”
“Alexa, set bedroom light to red”

Google Home integration
Before using Google Home to control your devices, make
sure you meet the following conditions:
• You have a Google Home device or an Android device with
Google Assistant.
• You have the newest version of Google Home app.
• You have the newest version of Google app (Android only).
• You have the Tellur Smart app and a related account.
Add devices in Tellur Smart app (refer to app instructions) –
you can skip this part if you've already added some devices
to your Tellur Smart account. Make sure your devices'
names are easily recognizable.
Link account in Home Control
1.Go to Google Home's homepage and tap "+".
2. Hit the "Add new" button, enter Tellur Smart in the search bar
and select the app from the list. Next, select your Tellur Smart
account's region, enter your Tellur Smart account and password
and tap "Link now". After you assign rooms for devices, your
devices will be listed in the Home Control page.

Now you can control your smart devices through Google Home. Take
bedroom light as example – the supported voice commands are as
below:
• Ok Google, turn on/off bedroom light.
• Ok Google, set bedroom light to 50 percent.
• Ok Google, brighten bedroom light.
• Ok Google, dim bedroom light.
• Ok Google, set bedroom light to red