Teltonika FMP100 User manual

https://wiki.teltonika-gps.com/view/Template:FMP1_First_start_card
Template:FMP1 First start card
Plug and Play tracker with GNSS, GSM and Bluetooth connectivity and cigarette lighter
power connector for easy installation.
Contents
1 Know your device
2 Set up your device
2.1 How to insert Micro-SIM card and connect the battery
Know your device

Set up your device
How to insert Micro-SIM card and connect the battery
Insert the SIM tray removal tool into the hole on the SIM card tray and then push until the1.
tray pops out.
Split device cover to access battery connector inside.2.
Connect the battery as shown to device.3.
Gently close device cover back.4.
Insert Nano-SIM card as shown with PIN request disabled or read our Wiki how to enter it5.
later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
Insert the SIM card tray back.6.
After configuration, see see PC Connection (Windows).7.
Device is ready to be mounted.
Nano-SIM card insertion/removal must be performed when device is powered off –
external voltage and battery are disconnected. Otherwise Nano-SIM card might be
damaged or device will not detect it.