Teltonika FMT100 User manual

FMT100 User Manual
V0.04

2
Table of contents
1INTRODUCTION ..................................................................................................................... 7
1.1 ATTENTION............................................................................................................................ 7
1.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 7
1.3 LEGAL NOTICE........................................................................................................................ 8
1.4 ABOUT DOCUMENT ................................................................................................................. 8
2BASIC DESCRIPTION ............................................................................................................... 8
2.1 BASIC CHARACTERISTICS ........................................................................................................... 8
2.2 TECHNICAL FEATURES............................................................................................................. 10
2.3 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY................................................................... 10
2.4 ELECTRICAL CHARACTERISTICS.................................................................................................. 11
2.5 ABSOLUTE MAXIMUM RATINGS............................................................................................... 11
3CONNECTION, PINOUT, ACCESSORIES.................................................................................. 12
3.1 HOW TO INSERT MICRO SIM CARD INTO FMT100 DEVICE:........................................................... 12
3.2 INSTALLING FMT100 DRIVERS ................................................................................................ 13
3.3 PINOUT............................................................................................................................... 14
3.4 NAVIGATE LED..................................................................................................................... 14
3.5 STATUS LED ........................................................................................................................ 14
4OPERATIONAL BASICS.......................................................................................................... 15
4.1 OPERATIONAL PRINCIPALS....................................................................................................... 15
4.2 SLEEP MODE ........................................................................................................................ 15
4.2.1 Sleep mode ............................................................................................................. 15
4.2.2 Deep Sleep mode .................................................................................................... 15
4.2.3 Online Deep Sleep mode......................................................................................... 16
4.2.4 Ultra Sleep mode .................................................................................................... 16
4.3 VIRTUAL ODOMETER ............................................................................................................. 16
4.4 FEATURES............................................................................................................................ 17
4.4.1 Green Driving.......................................................................................................... 17
4.4.2 Over Speeding......................................................................................................... 18
4.4.3 Excessive Idling ....................................................................................................... 18
4.4.4 Jamming Detection................................................................................................. 18
4.4.5 Trip.......................................................................................................................... 18
4.5 ACCELEROMETER SCENARIOS................................................................................................... 18
4.5.1 Towing Detection.................................................................................................... 18
4.5.2 Unplug Detection.................................................................................................... 18
4.5.3 Crash Detection ...................................................................................................... 19
4.5.3.1 Crash Trace operation........................................................................................................ 19
4.6 BLUETOOTH......................................................................................................................... 19
4.7 TRACKING ON DEMAND ......................................................................................................... 19
5CONFIGURATION ................................................................................................................. 20
5.1 STATUS WINDOW.................................................................................................................. 22
5.2 SECURITY SETTINGS ............................................................................................................... 22
5.3 SYSTEM SETTINGS.................................................................................................................. 23
5.4 GPRS SETTINGS.................................................................................................................... 25
5.5 DATA ACQUISITION SETTINGS .................................................................................................. 26
5.6 SMS \CALL SETTINGS ........................................................................................................... 29
5.7 GSM OPERATORS LIST........................................................................................................... 31
5.8 FEATURES SETTINGS............................................................................................................... 31
5.8.1 Green Driving.......................................................................................................... 32
5.8.2 Over Speeding......................................................................................................... 33
5.8.3 Jamming ................................................................................................................. 33
5.8.4 GNSS Fuel Counter.................................................................................................. 33
5.9 ACCELEROMETER FEATURES SETTINGS ....................................................................................... 34

3
5.9.1 Excessive Idling ....................................................................................................... 34
5.9.2 Towing Detection.................................................................................................... 34
5.9.3 Crash Detection ...................................................................................................... 35
5.9.4 Unplug Detection.................................................................................................... 36
5.10 AUTO GEOFENCE SETTINGS ..................................................................................................... 37
5.11 MANUAL GEOFENCE SETTINGS ................................................................................................ 38
5.12 TRIP \ODOMETER SETTINGS ................................................................................................... 38
5.13 BLUETOOTH SETTINGS............................................................................................................ 40
5.13.1 How to connect Bluetooth Hands Free adapter to FMT100 device ........................ 41
5.13.2 Device’s log using your mobile phone. ................................................................... 43
5.14 BLUETOOTH 4.0 SETTINGS ...................................................................................................... 44
5.15 I/O &OBD II SETTINGS ......................................................................................................... 44
5.16 OBD FUNCTIONALITY DESCRIPTION........................................................................................... 46
5.16.1 Supported OBD protocols ....................................................................................... 46
5.16.2 General info ............................................................................................................ 46
5.16.3 Initialization............................................................................................................ 46
5.16.4 Data........................................................................................................................ 47
6SMS COMMAND LIST ........................................................................................................... 47
6.1 BASIC COMMANDS ................................................................................................................ 47
6.1.1.1 getinfo ................................................................................................................................ 48
6.1.1.2 getver.................................................................................................................................. 48
6.1.1.3 getstatus ............................................................................................................................. 48
6.1.1.4 getgps ................................................................................................................................. 49
6.1.1.5 ggps..................................................................................................................................... 49
6.1.1.6 readio #............................................................................................................................... 49
6.1.1.7 getparam ............................................................................................................................ 49
6.1.1.8 setparam............................................................................................................................. 49
6.1.1.9 setdigout............................................................................................................................. 50
6.1.1.10 countrecs .......................................................................................................................... 50
6.1.1.11 towingreact....................................................................................................................... 50
6.1.1.12 faultcodes ......................................................................................................................... 50
6.1.1.13 obdinfo ............................................................................................................................. 51
6.1.1.14 btgetlist............................................................................................................................. 51
6.1.1.15 cleardtc ............................................................................................................................. 51
6.2 SYSTEM PARAMETERS: ........................................................................................................... 51
6.2.1.1 Movement Source (ID=100)................................................................................................ 51
6.2.1.2 Records Saving/Sending Without TS (ID=107) .................................................................... 51
6.2.1.3 Led Indication (ID=108)....................................................................................................... 51
6.2.1.4 GNSS Source (ID=109)......................................................................................................... 51
6.2.1.5 Battery Charge Mode (ID=110)........................................................................................... 52
6.2.1.6 Static Navigation (ID=106) .................................................................................................. 52
6.2.1.7 Static Navigation Settings (ID=112) .................................................................................... 52
6.2.1.8 Sleep Mode (ID=102) .......................................................................................................... 52
6.2.2 Sleep Timeout (ID=103) .......................................................................................... 53
6.2.2.1 Ignition Settings (ID=101) ................................................................................................... 53
6.2.2.2 High voltage level (ID=104)................................................................................................. 53
6.2.2.3 Low voltage level (ID=105).................................................................................................. 53
6.2.2.4 Movement start delay (ID=19001)...................................................................................... 53
6.2.2.5 Movement stop delay (ID=19002) ...................................................................................... 53
6.2.2.6 Time Synchronization (ID=900)........................................................................................... 54
6.2.2.7 NTP Resync (ID=901)........................................................................................................... 54
6.2.2.8 NTP Server 1 (ID=902)......................................................................................................... 54
6.2.2.9 NTP Server 2 (ID=903)......................................................................................................... 54
6.3 GPRS PARAMETERS .............................................................................................................. 54
6.3.1.1 GPRS Context (ID=2000) ..................................................................................................... 54
6.3.1.2 APN (ID=2001) .................................................................................................................... 54
6.3.1.3 APN Username (ID=2002) ................................................................................................... 55
6.3.1.4 APN Password (ID=2003) .................................................................................................... 55
6.3.1.5 Domain (ID=2004)............................................................................................................... 55
6.3.1.6 Target Server Port (ID=2005) .............................................................................................. 55
6.3.1.7 Protocol (ID=2006).............................................................................................................. 55

4
6.3.1.8 Backup Server Mode (ID=2010) .......................................................................................... 55
6.3.1.9 Backup Server Domain (ID=2008) ....................................................................................... 56
6.3.1.10 Backup Server Port (ID=2008)........................................................................................... 56
6.3.1.11 Protocol (ID=2009)............................................................................................................ 56
6.3.1.12 Open Link Timeout (ID=1000)........................................................................................... 56
6.3.1.13 Response Timeout (ID=1001)............................................................................................ 56
6.3.1.14 Sort By (ID=1002).............................................................................................................. 57
6.3.1.15 FOTA WEB Settings: Status (ID=13003) ............................................................................ 58
6.3.1.16 FOTA WEB Settings: Domain (ID=13000) .......................................................................... 58
6.3.1.17 FOTA WEB Settings: Port (ID=13001)................................................................................ 58
6.3.1.18 FOTA WEB Settings: Period (ID=13002) ............................................................................ 58
6.4 DATA ACQUISITION SETTINGS .................................................................................................. 59
6.4.1 Home Network GSM operator code “On stop” parameters ................................... 59
6.4.1.1 Min Period (ID=10000)........................................................................................................ 59
6.4.1.2 Min Saved Records (ID=10004)........................................................................................... 59
6.4.1.3 Send Period (ID=10005) ...................................................................................................... 59
6.4.2 Home Network GSM operator code “Moving” parameters ................................... 59
6.4.2.1 Min Period (ID=10050)........................................................................................................ 59
6.4.2.2 Min Distance (ID=10051) .................................................................................................... 59
6.4.2.3 Min Angle (ID=10052)......................................................................................................... 60
6.4.2.4 Min Speed delta (ID=10053) ............................................................................................... 60
6.4.2.5 Min Saved Records (ID=10054)........................................................................................... 60
6.4.2.6 Send Period (ID=10055) ...................................................................................................... 60
6.4.3 Roaming Network GSM operator code “On stops” parameters............................. 60
6.4.3.1 Min Period (ID=10100)........................................................................................................ 60
6.4.3.2 Min Saved Records (ID=10104)........................................................................................... 61
6.4.3.3 Send Period (ID=10105) ...................................................................................................... 61
6.4.4 Roaming Network GSM operator code “Moving” parameters............................... 61
6.4.4.1 Min Period (ID=10150)........................................................................................................ 61
6.4.4.2 Min Distance (ID=10151) .................................................................................................... 61
6.4.4.3 Min Angle (ID=10152)......................................................................................................... 61
6.4.4.4 Min Speed (ID=10153) ........................................................................................................ 62
6.4.4.5 Min Saved Records (ID=10154)........................................................................................... 62
6.4.4.6 Send Period (ID=10155) ...................................................................................................... 62
6.4.5 Unknown Network GSM operator code “On stop” parameters ............................. 62
6.4.5.1 Min Period (ID=10200)........................................................................................................ 62
6.4.5.2 Min Saved Records (ID=10204)........................................................................................... 62
6.4.5.3 Send Period (ID=10205) ...................................................................................................... 62
6.4.6 Unknown Network GSM operator code “Moving” parameters.............................. 63
6.4.6.1 Min Period (ID=10250)........................................................................................................ 63
6.4.6.2 Min Distance (ID=10251) .................................................................................................... 63
6.4.6.3 Min Angle (ID=10252)......................................................................................................... 63
6.4.6.4 Min Speed (ID=10253) ........................................................................................................ 63
6.4.6.5 Min Saved Records (ID=10254)........................................................................................... 63
6.4.6.6 Send Period (ID=10255) ...................................................................................................... 64
6.5 SMS \CALL SETTINGS PARAMETERS......................................................................................... 64
6.5.1.1 Allow SMS Data Sending (ID=3000) .................................................................................... 64
6.5.1.2 Data Send Number (ID=3001)............................................................................................. 64
6.5.1.3 Login (ID=3003)................................................................................................................... 64
6.5.1.4 Password (ID=3004)............................................................................................................ 64
6.5.1.5 SMS Event Time Zone (ID=3006)......................................................................................... 64
6.5.1.6 Incoming Call Settings (ID=3005) ........................................................................................ 65
6.5.1.7 Authorized phone numbers (ID=4000-4199) ...................................................................... 65
6.5.1.8 SMS Event Predefined Numbers (ID=6000-6009) ............................................................... 65
6.6 GSM OPERATORS PARAMETERS .............................................................................................. 65
6.6.1.1 Roaming Operator List (ID=5000-5049) .............................................................................. 65
6.6.1.2 Operator Black List (ID=5500-5549).................................................................................... 65
6.7 FEATURES PARAMETERS ......................................................................................................... 65
6.7.1 Green Driving parameters ...................................................................................... 65
6.7.1.1 Scenario Settings (ID=11000).............................................................................................. 65
6.7.1.2 Max Acceleration (ID=11004) ............................................................................................. 66
6.7.1.3 Max Braking (ID=11005) ..................................................................................................... 66
6.7.1.4 Max Cornering (ID=11006).................................................................................................. 66

5
6.7.1.5 Source (ID=11007) .............................................................................................................. 66
6.7.1.6 Green Driving Duration (ID=11008) .................................................................................... 66
6.7.1.7 SMS Text (ID=8034) ............................................................................................................ 66
6.7.2 Over Speeding parameters ..................................................................................... 67
6.7.2.1 Scenario (ID=11100) ........................................................................................................... 67
6.7.2.2 Max Speed (ID=11104) ....................................................................................................... 67
6.7.2.3 SMS Text (ID=8032) ............................................................................................................ 67
6.8 JAMMING PAAMETERS ........................................................................................................... 67
6.8.1.1 Scenario Settings (ID=11300).............................................................................................. 67
6.8.1.2 Eventual Records (ID=11303).............................................................................................. 67
6.8.1.3 Time Until Jamming Event Detection (ID=11305)............................................................... 67
6.8.2 GNSS Fuel Counter settings .................................................................................... 68
6.8.2.1 City Consumption (L/100km) (ID=11900) ........................................................................... 68
6.8.2.2 Highway Consumption (L/100km) (ID=11901)................................................................... 68
6.8.2.3 Average Consumption (L/100km) (ID=11902) ................................................................... 68
6.8.2.4 City Speed (km/h) (ID=11903) ............................................................................................ 68
6.8.2.5 Highway Speed (km/h) (ID=11904)..................................................................................... 68
6.8.2.6 Average Speed (km/h) (ID=11905) ..................................................................................... 68
6.8.2.7 Correction Coefficient (ID=11906)...................................................................................... 68
6.8.2.8 Fuel Consumption On Idling (L/h) (ID=11907) .................................................................... 69
6.8.2.9 Higher Speeds Add (%) (ID=11908)..................................................................................... 69
6.8.2.10 Highway Consumption Every (km/h) (ID=11909) ............................................................. 69
6.9 ACCELEROMETER FEATURES SETTINGS....................................................................................... 69
6.9.1 Excessive Idling settings.......................................................................................... 69
6.9.1.1 Scenario Settings (ID=11200).............................................................................................. 69
6.9.1.2 Eventual Records (ID=11203).............................................................................................. 69
6.9.1.3 Time To Stopped (s) (ID=11205) ......................................................................................... 69
6.9.1.4 Time To Moving (s) (ID=11206)........................................................................................... 69
6.9.1.5 SMS Text (ID=8033) ............................................................................................................ 70
6.9.2 Unplug Detection settings ...................................................................................... 70
6.9.2.1 Scenario Settings (ID=11500).............................................................................................. 70
6.9.2.2 Eventual Records (ID=11501).............................................................................................. 70
6.9.2.3 Unplug Detection Mode (ID=11502)................................................................................... 70
6.9.2.4 Send SMS To (ID=7067) ...................................................................................................... 70
6.9.2.5 SMS Text (ID=8036) ............................................................................................................ 70
6.9.3 Towing Detection.................................................................................................... 71
6.9.3.1 Scenario Settings (ID=11600).............................................................................................. 71
6.9.3.2 Eventual Records (ID=11601).............................................................................................. 71
6.9.3.3 Activation Timeout (min) (ID=11602) ................................................................................. 71
6.9.3.4 Event Timeout (s) (ID=11603) ............................................................................................. 71
6.9.3.5 Threshold (g) (ID=11605) .................................................................................................... 71
6.9.3.6 Angle (deg) (ID=11606) ....................................................................................................... 71
6.9.3.7 Duration (ms) (ID=11607) ................................................................................................... 71
6.9.3.8 SMS Text (ID=8035) ............................................................................................................ 72
6.9.4 Crash Detection ...................................................................................................... 72
6.9.4.1 Scenario Settings (ID=11400).............................................................................................. 72
6.9.4.2 Duration (ms) (ID=11401) ................................................................................................... 72
6.9.4.3 Threshold (mg) (ID=11402) ................................................................................................. 72
6.9.4.4 Crash Trace (ID=11406)....................................................................................................... 72
6.9.4.5 SMS Text (ID=8037) ............................................................................................................ 72
6.10 AUTO GEOFENCE SETTINGS ..................................................................................................... 73
6.10.1.1 Scenario Settings (ID=20000)............................................................................................ 73
6.10.1.2 Eventual Records (ID=20002)............................................................................................ 73
6.10.1.3 Generate Event (ID=20001) .............................................................................................. 73
6.10.1.4 Activation Timeout (ID=20003)......................................................................................... 73
6.10.1.5 Radius (ID=20004)............................................................................................................. 73
6.10.1.6 SMS Text (ID=8030) .......................................................................................................... 73
6.11 TRIP \ODOMETER ................................................................................................................ 74
6.11.1.1 Scenario Settings (ID=11800)............................................................................................ 74
6.11.1.2 Eventual Records (ID=11801)............................................................................................ 74
6.11.1.3 Mode (ID=11802).............................................................................................................. 74
6.11.1.4 Start Speed (km/h) (ID=11803)......................................................................................... 74
6.11.1.5 Ignition OFF Timeout (s) (ID=11804)................................................................................. 74

6
6.11.1.6 SMS Text (ID=8031) .......................................................................................................... 74
6.11.1.7 Eco Score Allowed Events (ID=11804) .............................................................................. 75
6.11.1.8 Calculation Source (ID=11806).......................................................................................... 75
6.11.1.9 Odometer value (km) (ID=11807)..................................................................................... 75
6.12 BLUETOOTH SETTINGS............................................................................................................ 75
6.12.1.1 BT Radio (ID=800) ............................................................................................................. 75
6.12.1.2 Local Name (ID 801).......................................................................................................... 75
6.12.1.3 Local PIN (ID=802)............................................................................................................. 75
6.12.1.4 Security Mode (ID=803).................................................................................................... 76
6.12.1.5 Connection Mode (ID=807) .............................................................................................. 76
6.12.1.6 External MAC (ID=804) ..................................................................................................... 76
6.12.1.7 External Name (ID=805).................................................................................................... 76
6.12.1.8 External PIN (ID=806)........................................................................................................ 76
6.12.1.9 Authorized Devices MAC List (ID=830-834) ...................................................................... 76
6.13 I/O PARAMETERS.................................................................................................................. 76
6.13.1.1 I/O#1 property parameter Ignition (ID=50000) ................................................................ 77
6.13.1.2 I/O#1 Logic operand (ID=50001)....................................................................................... 77
6.13.1.3 I/O#1 High level (ID=50002).............................................................................................. 77
6.13.1.4 I/O#1 Low level (ID=50003) .............................................................................................. 77
6.13.1.5 I/O#1 Event only (ID=50004) ............................................................................................ 78
6.13.1.6 I/O#1 averaging length (ID=50005)................................................................................... 78
6.13.2 I\O elements parameters and types. ...................................................................... 78
6.14 OBD SETTINGS ..................................................................................................................... 83
6.14.1 OBD elements parameters and types ..................................................................... 83
7EC DECLARATION OF CONFORMITY ..................................................................................... 88
CHANGE LOG............................................................................................................................... 89

7
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, before unplugging the power supply, do not
touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
Please consult representatives of your vehicle model
regarding OBD II location on your vehicle. In case you
are not sure of proper connection, please consult
qualified personnel.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FMT100 has USB interface;
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FMT100 connection.
Warning! Do not use FMT100 device if it distracts driver
or causes inconvenience due to OBD II placement.
Device must not interfere with driver.
1.2 Instructions of safety
This chapter contains information on how to operate FMT100 safely. By following these
requirements and recommendations, you will avoid any dangerous situations. You must read
these instructions carefully and follow them strictly before operating the device!
The device uses a 10 V... 30 V DC power supply. The nominal voltage is 12 V DC. The
allowed range of voltage is 10 V... 30 V DC.
To avoid mechanical damage, it is advised to transport the FMT100 device in an impact-
proof package.
Before dismounting the device from the vehicle, ignition must be off.

8
1.3 Legal Notice
Copyright © 2018 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FMT100 device.
Acronyms and terms used in document:
PC –Personal Computer;
GPS –Global Positioning System;
GPRS –General Packet Radio Service;
GNSS –Global Navigation Satellite System;
GSM –Global System for Mobile Communications;
SMS –Short Message Service;
AC/DC –Alternating Current/Direct Current;
I/O –Input/Output;
Record –AVL data stored in FMT100 memory. AVL data contains GNSS and I/O
information;
AVL packet - data packet which is being sent to the server during data transmission.
2BASIC DESCRIPTION
FMT100 is a tracking terminal with GNSS and GSM connectivity, which is able to collect
device coordinates and transfer them via GSM network to server. This device is perfectly suitable
for applications, which need location acquirement of remote objects. It is important to mention
that FMT100 has two pin interface. FMT100 also has a USB port for device status log output and
device configuration.
Package contents
1
The FMT100 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
Already implemented FMT100 device;
Top and bottom device cover parts;
Li-ion battery.
2.1 Basic characteristics
GSM / GPRS / GNSS features:
Teltonika TM2500 multi-band module (GSM 850 / 900 / 1800 / 1900 MHz);
1
Package content depends on Order Code, and can be customized based on customer needs.

9
GPRS class 12;
SMS (text, data);
Integrated GNSS receiver;
Up to -161 dBm GNSS receiver sensitivity.
Hardware features:
Built-in movement sensor;
Built-in Bluetooth 4.0;
Internal High Gain GNSS antenna;
Internal High Gain GSM antenna;
170 mAh Li-ion rechargeable 3.7 V battery.
Interface features:
Power supply: 10 ÷ 30 V;
USB port;
2 LEDs indicating device status.
Special features:
Fast position fix;
High quality track even in high density urban canyon;
Small case;
High gain internal GNSS and GSM antennas;
2 LED status indication;
Real-time tracking;
Smart data acquisition based on:
oTime;
oAngle;
oDistance;
oIgnition or any other I/O event.
Sending acquired data via GPRS;
GPRS and SMS I/O events;
Virtual odometer;
Jamming detection;
Configurable using Secured SMS Commands;
Spy call;
Overvoltage protection.

10
2.2 Technical features
Table 1 FMT100 specifications
Part name
Physical specification
Technical details
Navigation LED
LED
Power supply 10... 30 V DC
2 W Max
Energy consumption1:
GPRS: 55 mA r.m.s Max.,
Nominal: average 26 mA r.m.s,
Deep Sleep: average 9 mA,
GPS Sleep: average 11 mA,
Online Deep Sleep: average 6 mA,
Ultra Sleep: average 4.5 mA2
Battery charge current:
average 120 mA,
Rated current:
250 mA,
Operation temperature:
-10 ⁰C ... +55 ⁰C
Storage temperature:
-40 ⁰C ... +70 ⁰C
Storage relative humidity 5 ... 95 % (no
condensation)
Internal fuse: 3A, 125V
Weight: 63 g.
Modem LED
LED
USB
Mini USB socket
Figure 1 FMT100 view & dimensions (tolerance ±2mm)
2.3 Technical Information about internal battery
Li-ion rechargeable battery, 3.7 V, 170 mAh.
1Energy consumption has been tested at 12 V voltage with no battery charging.
2When in Deep Sleep mode no data storing and sending is activated.

11
Battery Disposal instructions:
Battery should not be disposed of with general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose
them to battery recycle bin found in stores.
Warranty: batteries are covered by 6 month warranty support.
Table 2 Battery specifications
Internal back-up
battery
Battery voltage V
Nominal capacity (mAh)
Power(Wh)
Charging
temperature °C
Li-ion rechargeable
battery
3.50～3.90
≥170
0.64 - 0.66
0 –45
FMT100 internal battery is used for detecting external voltage disconnection.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
2.4 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
10
30
V
2.5 Absolute Maximum Ratings
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-30
30
V

12
3CONNECTION, PINOUT, ACCESSORIES
3.1 How to insert micro SIM card into FMT100 device:
Unscrew the screws.
Remove the cover.
Insert micro SIM card as shown
(bottom slot).
Insert SD card as shown (top
slot).
Attach the cover and put the screws back in.

13
3.2 Installing FMT100 drivers
Software requirements:
• Operating system 32-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7.
• MS .NET Framework V3.5 or later (http://www.microsoft.com or
http://avl1.teltonika.lt/downloads/tavl/Framework/dotnetfx35setupSP1.zip).
Drivers:
Please download MediaTek inbox COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FMT1000/MS_USB_ComPort_Driver_exe_v1.1032.3.zip
Installing drivers:
Extract and run FP_INBOX_InstallDriver_v1.1032.3.exe. This driver is used to detect FMT100
device connected to the computer. Click 'Next' in driver installation window (figures below):
Figure 2 Driver installation window
This will launch device driver installation wizard. In the following window click ‘Install’
button:
Figure 3 Driver installation window

14
Setup will continue installing drivers and will display a window about successful process at
the end. Click 'Finish' to complete setup:
Figure 4 Driver installation window
You have now installed drivers for FMT100 device successfully.
3.3 Pinout
3.4 Navigate LED
3.5 Status LED
Behavior
Meaning
Blinking every second
Normal mode
Blinking every 2 seconds
Deep sleep mode
Blinking fast for a short time
Modem activity
Blinking fast constantly
Boot mode
Off
Device is not working
Or
Device firmware being flashed
Color
Pin Name
Description
Black
GND (-)
Ground pin
Red
Power +(1030) V DC
Power range +(10...30) V, DC to Ground
Behavior
Meaning
Permanently switched on
GNSS signal is not received
Blinking every second
Normal mode, GNSS is working
Off
GNSS is turned off because:
Deep sleep mode
Or
GNSS antenna short circuited

15
4OPERATIONAL BASICS
4.1 Operational principals
FMT100 module is designed to acquire records and send them to the server. Records
contain GNSS data and I/O information. Module uses GNSS receiver to acquire GNSS data and is
powered with three data acquiring methods: time-based, distance-based and angle-based. Note,
that if FMT100 loses connection to GNSS satellites, it continues to make records, however
coordinate in these records remains the same (last known coordinate). All data is stored in flash
memory and later can be sent via GPRS.
GPRS and SMS settings are described in later sections. FMT100 communicates with server
using special data protocol.
FMT100 can be managed by SMS commands. SMS Command list is described in SMS
COMMAND LIST section. Module configuration can be performed only via SMS.
4.2 Sleep mode
4.2.1 Sleep mode
FMT100 is able to go to sleep mode if such mode is enabled.
This timeout (defined period) starts counting when device is in STOP mode. After timeout
is reached and all conditions for sleep mode are met, device goes to sleep mode. While in sleep
mode, FMT100 turns GPS module off and it is still making new periodic records. As a result power
usage decreases, in turn saving vehicle battery.
FMT100 can enter sleep mode if ALL of these conditions are met:
FMT100 has to be configured to work in Sleep mode and start sleep timeout is
reached;
Device must have synchronized time with GNSS satellites;
No movement by movement sensor is detected;
Ignition (configured Ignition Source) is off.
FMT100 exits sleep mode when if ONE of following conditions are true:
Movement by movement sensor is detected;
Ignition (configured Ignition Source) is turned on.
4.2.2 Deep Sleep mode
While in deep sleep mode, FMT100 sets GNSS receiver to sleep mode and turns off
GSM/GPRS module (it is not possible to wake up device via SMS). Despite records with last
known coordinate are being saved and send to AVL server (GSM/GPRS module is turned on to
send data and after that it is turned off again), power usage is decreased to save vehicle’s
battery. Note, that power saving depends on two configurable parameters: send period and min.
record saving period in “X on Stop Mode”.
FMT100 can enter deep sleep mode if ALL of these conditions are met:
FMT100 has to be configured to work in Deep Sleep mode;
Device must be synchronized time with GNSS satellites;
FMT100 has to be in „X on Stop Mode“ (Configured by Mode switch parameter);

16
Movement by accelerometer is not detected;
Ignition (Configured to be detected by Power Voltage, Ignition or Accelerometer) is
off;
Min. Record Saving Period (Data Acquisition Mode settings) must be bigger than
Active Data Link Timeout parameter, that FMT100 could close GPRS link.
Send period (Data Acquisition Mode settings) minus Active Data Link Timeout must
be more than 90 sec., that FMT100 could close GPRS link for at least 90 sec.
Sleep timeout is reached.
FMT100 exits deep sleep mode when if ONE of following conditions are true:
Movement by accelerometer is detected;
Ignition (Configured to be detected by Power Voltage, Ignition or Accelerometer) is turned
on.
4.2.3 Online Deep Sleep mode
In this mode device works as in Deep Sleep mode, but without turning off GSM network.
GSM part stays powered, so this increases power consumption. In this mode, device should
received/send SMS and make/receive calls. Also not closes GPRS context, if previously opened.
4.2.4 Ultra Sleep mode
In this mode device turns of all of the functionality. Both LEDs are also off.
4.3 Virtual Odometer
Virtual Odometer is used to calculate distance travelled in FMT100 as a separate I/O
element. When FMT100 detects movement, it starts counting distance using GNSS signal: every
second it checks current location and calculates distance between current and previous point. It
keeps adding these intervals until it is time to make a record, then FMT100 records its location
and adds odometer value, which is equal to the sum of all distances, measured every second.
User can choose Odometer mode: 0 –Normal mode, or 1 –Continuous.
At Normal mode, when record is made, odometer resets to zero and distance calculation
starts all over again.
Continuous odometer mode requires ignition (configured Ignition source) to be turned on.
Odometer counts all distance calculations from records and sums them to one distance.
Continuous odometer stops counting, when vehicle is at stop and ignition is turned off.

17
Figure 5 Odometer continuous and normal (not continuous) distance counting parameter example
4.4 Features
Using available features can greatly increase FMT100 usability options.
4.4.1 Green Driving
Helps to prevent and inspect driver about harsh driving. Scenario continuously monitors:
accelerating force, braking force and cornering angles.
To prevent generating false events, harsh acceleration and harsh braking is monitored only
when following conditions are fulfilled:
Ignition is ON;
Vehicle speed is equal or higher than 10 km/h.
Harsh cornering is monitored only when following conditions are fulfilled:
Ignition is ON;
Vehicle speed is equal or higher than 30 km/h.
Some new parameters and IO elements are introduced with FMT100.
Table 3 Green Driving new parameters
Parameter ID
Parameter
type
Default value
Value range
Parameter
name
Min
Max
11009
Uint16
30
10
1000
Green driving
start timeout
11010
Uint16
100
10
1000
Green driving
stop timeout
Table 4 Eco Driving new parameters
IO element AVL ID
Element type
Element name
258
Uint64
Eco driving max value
259
Uint64
Eco driving average value
260
Uint16
Eco driving duration

18
Note: Green Driving Scenario is a factor on various cars and various drivers
testing phase and can be subject to changes. Teltonika is constantly working
on improvement of the functionality of the devices, and strongly recommends
using the latest version of the firmware.
4.4.2 Over Speeding
Helps to prevent from exceeding fixed speed and inspects driver if needed.
4.4.3 Excessive Idling
Informs you if your vehicle is stationary but engine is on for selected period of time to help
you to save fuel
4.4.4 Jamming Detection
Shows when GSM signal jamming occurs.
4.4.5 Trip
Enables user extended monitoring of performed trips (from engine start at present location
to engine stop at arrived location), log their start and stop points, view driven total distance
3
.
Event will be generated (included into send records) only when trip starts and finishes.
4.5 Accelerometer scenarios
4.5.1 Towing Detection
Helps to inform driver about car moving with ignition off. FMT100 generates event when
car is being towed or raised, for example in case of vehicle evacuation.
FMT100 activates towing function when these conditions are met:
•Ignition (configured Ignition Source) is OFF;
•Activation Timeout (set in Towing detection features) is reached.
When Activation Timeout is reached and Ignition is still in OFF state, FMT100 monitors
accelerometer data. If Acceleration or Angle value reaches configured threshold for configured
Duration (in milliseconds), check Ignition state. If Ignition is still OFF during configured "Ignition
check after Event Timeout" time, then event is generated. If configured - sends SMS event or
makes a call.
Function will be reactivated after FMT100 again detects change of Ignition state from ON
to OFF.
4.5.2 Unplug Detection
Generates event when FMT100 is unplugged from external voltage source.
3
Continuous odometer –total driven distance, works only in TRIP mode. Continues distance is counted only
for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip will start counting
from the begining.

19
4.5.3 Crash Detection
If Crash Detection is enabled, it monitors acceleration on each axis, if acceleration exceeds
configured threshold for configured duration then crash event is generated. Depending on
configuration crash record structure follows codec 8 or codec 8 extended protocol structure. If
codec 8 extended enabled crash event records are sent without any IO elements, only GNSS and
accelerometer data if it is in configured range.
4.5.3.1 Crash Trace operation
If Crash Trace is enabled FMT100 will collect acceleration data every 40 milliseconds.
4.6 Bluetooth
Bluetooth can work in two modes - slave or master.
While working as master mode - Bluetooth can connect to defined "hands free" or "OBDII"
system.
While working as slave mode - Bluetooth can accept incoming connection from external
device.
4.7 Tracking on Demand
After device receives SMS/GPRS command " on_demand_trackingX" where X is [0:2] value,
then device starts to generate high priority records and initiate data sending to server. This
feature is confiburable via SMS/GPRS commands only.
Some new Tracking on Demand parameters are introduced in FMT100.
Table 5 Tracking on Demand parameters and values
Parameter ID
Parameter
type
Default value
Value range
Parameter
name
Min
Max
10990
Uint8
10
5
60
Tracking
period
10991
Uint16
600
300
3600
Tracking
duration
Table 6 Tracking on Demand SMS/GPRS commands
SMS/GPRS command
X value, meaning
on_demand_trackingX
0 –Stops Tracking on Demand functionality
1 –Starts Tracking on Demand functionality
2 –Generates one high priority record and inititates data
sending to server

20
5CONFIGURATION
New FMT100 module has default factory settings. Settings should be changed according to
your application and your GSM operator information.
It can be configured to acquire and send data to server. If device is not able to send data to
server (e. g. GPRS connection is not available) FMT100 will start storing records to flash memory.
It will send data later when GPRS is available again. Note that FMT100 can have memory full of
records. In such case it will start deleting the oldest records in order to save new ones. Please be
aware that sending all data records to server may take some time.
FMT100 configuration may be performed via SMS commands or Configurator application,
which will be introduced in this chapter. Contact sales manager to get the latest FMT100
Configurator version.
FMT100 Configurator operates on Microsoft Windows OS and uses MS .Net Framework 3.5
or higher. Please ensure that MS .Net Framework 3.5 or later is installed on your PC before
starting configurator. Latest MS .Net Framework version can be downloaded from official
Microsoft web page.
Module configuration can be performed over USB cable or Bluetooth connection.
Configuration process starts from starting FMT100 Configurator program and then connecting to
FMT100 device via Connect button located in the middle of home screen (see Figure 6). FMT100
has one user editable profile, which can be loaded from device, and saved. User can also revert
to default settings, by pressing Reset to defaults button. After any modification of configuration
settings, it has to be saved to FMT100 device, otherwise it will not be written to device.
Note: It is not recommended to downgrade firmware. We can‘t guarantee that
all functions will be working correctly - it is possible that in old firmware
versions there won‘t be some functions.
Figure 6 Configurator connection window
Connection window buttons description: