Teltonika GH1201 User manual

User Manual v1.10
Handheld GPS/GSM Tracker
GH1201

2
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
TABLE OF CONTENTS
1. PREFACE ............................................................................................................................................... 3
2. GE ERAL I FORMATIO ..................................................................................................................... 7
2.1 PACKAGE CO TE T..........................................................................................................................7
2.2 SPECIFICATIO S OF THE DEVICE ...................................................................................................7
2.3 ELECTRO IC SPECIFICATIO S ........................................................................................................8
3. GETTI G STARTED............................................................................................................................... 9
3.1 I SERTI G SIM CARD A D BATTERY ..............................................................................................9
3.2 CHARGI G THE BATTERY ...............................................................................................................10
4. I STALLI G SOFTWARE.................................................................................................................... 11
5. GETTI G TO K OW THE HA DHELD GPS/GSM TRACKER........................................................... 12
5.1 CO ECTI G TO A PC .....................................................................................................................12
6. DEVICE I DICATORS.......................................................................................................................... 13
6.1 I DICATI G THE STATUS ................................................................................................................13
6.2 I DICATI G A BUTTO PUSH..........................................................................................................14
6.3 SOU D I DICATIO ..........................................................................................................................14
7. SPECIAL SMS REQUESTS ................................................................................................................. 15
8. TRACK ASSISTA T SOFTWARE........................................................................................................ 18
8.1 TRACK ASSISTA T CO FIGURATIO TOOL .................................................................................18
8.1.1 CO FIGURATIO OF GH1201 USI G A PC .....................................................................18
8.1.2 PI CODE.............................................................................................................................23
8.2 TRACK ASSISTA T MO ITORI G TOOL ........................................................................................23
9. MAI TE A CE A D REPAIR ............................................................................................................. 30

3
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
1. PREFACE
I TRODUCTIO
GH1201 is a device with built-in functions characteristic of a mobile phone and an integrated GPS receiver.
This device is intended for the surveillance and protection of people, cargo and objects. The GPS receiver
may define the current location of the device and sends this data to a person in charge or the operation
centre.
PROTECTIO OF COPYRIGHTS
All rights protected. © 2008 UAB Teltonika.
All rights are owned by the author. You may not copy, compile or transfer the present information to third
parties or distribute it without a prior written consent by UAB Teltonika.
Other products and company names mentioned in this Manual may be trademarks or names of products of
such companies.
CO TACTS
In case you have problems with the use of the product beyond your possibilities to solve it, please address
them to the Technical Assistance Centre (TAC) by e-Mail [e-mail] or contact your local vendor.
We would be pleased to be of any assistance to you.

4
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
FOR YOUR SAFETY
Please read these basic explanations. In disregarding them you may face danger or trespassing of existing
laws. In case you wish to have more information, please read the concise user manual.
SW TCH ON SAFELY
Do not switch on the device where it is prohibited to use a mobile phone or when such use
may cause disturbances or danger.
SAFE TRAFF C S THE MOST MPORTANT
Do not infringe local legislation. When driving, use your hands for driving the car only. The
most important thing you have to think of when driving is the safety of the traffic.
D STURBANCES
All wireless equipment may be sensitive to disturbances which may have effect on its
operation.
SW TCH OFF N HOSP TALS
Follow all restrictions. You might need to switch off when being in the vicinity of any
medical equipment.
SW TCH OFF N THE MEANS OF TRANSPORT
Follow all restrictions. Wireless equipment may cause disturbances in air traffic.
SW TCH OFF WHEN FUEL NG
Do not use the device in petrol stations. Do not use it in the vicinity of fuels or chemicals.
SW TCH OFF WHEN BE NG N THE V C N TY OF PLACES OF EXPLOS ONS
Follow all restrictions. Do not use the device at places where explosion works are carried
out.
PREPARE YOUR COMPUTER
Personal or portable computers to be connected to the device must comply with the
requirements of DI E 60950-1.2003.

5
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
CONNECT THE DEV CE TO THE COMPUTER
Computers to be connected to the device may be stationary or portable having an USB
connection.
CHARGER
Chargers and personal computers must comply with the requirements of DI E 60950-
1.2003.
USE ONLY THE BATTER ES SUPPL ED BY THE MANUFACTURER
If a battery of an improperly sort is inserted, there is a possibility for explosion or other
harms.
USE THE BATTERY SAFELY
Ensure that the battery is not immersed in the water. When storing, keep the device in a
cool, dry place.
Ensure that the battery and device are not exposed to hot surfaces or direct sunlight.
Do not mix the polarity of wires when connecting the battery to the device.
Ensure that the positive and negative poles are protected from short circuit.
When transporting, ensure that the battery is safe from metal articles and do not keep it
with metal rings, chains, etc.
Do not damage the battery with nails or sharp objects.
Do not try to charge the battery directly from a household socket. This may lead to
explosion or other harms.
To avoid mechanical damages, it is advisable to carry the equipment in a blow-proof package.
The operation environment of the device has effect on its communication quality. If the operation of the
device has been disturbed, only qualified maintenance staff may do the repair. It is recommended to deliver
the device to a repair centre or back to the factory.
Power supply chains available at a place used for connecting GH1201 must have safety devices (automatic
bipolar switch off devices) which protect from power supply excess, short circuit and failure of grounding.
The switch off device must be installed at a place which is easy to access. Its power must be consistent
with the power of the connected device, and the distance between the contacts must not be less than 3
mm.

6
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
SAFELY D SCONNECT THE DEV CE
The device may be disconnected from the PC or charger by pulling out the USB
connection from the computer USB socket or by pulling out the mini USB connection from
GH1201.
Household
socket
Automatic switch off
device
Zero-wire
Phase-wire
Protect.
grounding
Electricity
distributing
board
230
V
PCs
USB cable
GH1201
Charger
230-5V
USB connection

7
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
2. GENERAL NFORMAT ON
2.1 PACKAGE CONTENT
GH1201 is supplied to the client packed in a cardboard box with all supplements that are necessary for
operation. The set consists of:
- Handheld GPS/GSM Tracker GH1201
- Li-Ion or Li-Pol 750mAh battery 3.7V
- USB – mini USB cable
- 230V – USB charger
- SETUP CD-ROM with User’s Manual and Software
- Printed User’s Quick-Start Manual
- Mini Screw Driver
- eck Strap
ote: The manufacturer’s set does not include any SIM card which is necessary to connect to
the GSM network. A SIM card can be acquired from your local supplier of GSM services.
If any part is missing in the set, please contact the representative of the manufacturer or dealer
(www.teltonika.eu).
2.2 SPEC F CAT ONS OF THE DEV CE
GPS receiver SiRF Star III 20 channels
GPS antenna Internal
GSM frequencies Quadband
GSM 900/1800 MHz and 850/1900 MHz
GPRS Class 10 data
Voice calls Yes
Vibro Yes
Data transfer SMS or GPRS
Connection to a PC USB
Transmission of MEA Code USB
Configuration SMS or USB
Internal memory 1MB
Buttons 6
Lock for keyboard Yes
Battery Li-Ion or Li-Pol 750mAh 3.7V
LED indicators 3 (Battery, GSM, GPS/Alarm)
Dimensions (mm) 91 x 44 x 19
Standby time (GPS off / GPRS off) 336 hours*
Working time (GPS always on / GPRS off) 6 hours*
Working time periodically switching on GPS (time: 1 hour) 120 hours*
Recommended operating temperature 0 up to 50ºC
General operating temperature -20 up to 60 ºC
Weight 80g
* More powerful batteries may be purchased as additional accessories

8
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
2.3 ELECTRON C SPEC F CAT ONS
Parameter Min Norm Max
Supply voltage (DC) 4.5V 5V 5.5V
Use of electric current 2mA 360mA 2500mA (10ms)
Battery voltage (DC) 3.7V 4.2V
Charger voltage (DC) 4.5V 5V 5.5V
Charger electric current 600mA 1000mA

9
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
3. GETT NG STARTED
3.1 NSERT NG S M CARD AND BATTERY
All SIM cards must be kept in a save place. You may request your SIM card supplier to provide SIM cards
and information about the use of SIM card-related services. The supplier may be a service supplier, a
network operator or another seller. The SIM card must be inserted in the way as set below.
To insert the battery correctly, please connect its connector to the connector of the device. Afterwards hold
the battery so that the wire of the battery is directed to the left. Bend the wire carefully and put it along the
left internal side of the device. ow put the battery along the left side of the device over the wire and insert it
into the device.
ote: Before removing the cover,
switch off the device and
disconnect it from the charger or
PC. The device must be always
kept and used with a cover and the
screw screwed tightly.
1 2
3

10
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
3.2 CHARG NG THE BATTERY
By connecting the device to one of the USB connectors of a PC or by using the 230V – 5V charger
available in the set, it is possible to charge the internal battery of the device. For the first time, it is advisable
to charge the battery using the 230-5V charger (not via PC).
1. Connect the charger and the device by using an USB cable.
2. Plug the charger in the alternating current wall socket.
After the device is connected to the PC or alternating current wall socket, the battery charging will start.
Charging is indicated by the indicator which is present on the GH1201 (see Indicators of the device). If, for
the first time, the device has been connected with an empty battery, the indicator starts to flash just after
several minutes.
ote: Only approved batteries, chargers and supplements supplied by Teltonika should be used
with this device. By using other sorts of batteries, chargers and supplements you risk to be
deprived of all guaranties and it may also be dangerous for you and your environment.
If an unsuitable SIM card has been inserted or the device fails to detect it, the device will reload
automatically and tries to start the connection anew (if SIM card is not inserted the device will reloads three
times). If the reconnection fails, the device will show it by its indicator (Indicators of the device).
If the card has been inserted later, the device must be switched off and switched on again or has to be
reloaded.
ote: As with any other radio communication transmitters, do not touch
its antenna. Touching the antenna may be a cause for deterioration of
the communication quality and the device may use more energy as
usual. The antenna of the device will operate better and its battery will
discharge slower if the surface of the antenna will not be subject of
touching when in use.

11
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
4. NSTALL NG SOFTWARE
Drivers and software necessary for installing are written on a SETUP CD-ROM disk supplied with the
device. TELTO IKA recommends to check www.teltonika.eu for software updates. The software version
indicated on the splash screen.
Minimum system requirements
Operating Systems (OS)*: MS Windows 2000 SP3 or MS Windows XP SP1
Disk space: 20 MB
Minimum screen resolution: 1024 x 768 (Full Screen)
Windows Installer 3.0
* We are currently working on the support of additional OS. Please contact us or your local seller for
further information.
All components required for the
Track Assistant Software are available in the set of the device; however,
should you fail to find it, try downloading it from the official website: www.teltonika.eu.
- Insert the CD available within the set into the CD driver.
- The installation of the software starts by activating the Setup.exe file available in the
catalogue ...\Drivers Installation Files\Setup.exe
- Install the Track Assistant Software by referring to the information indicated within the
related windows.

12
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
5. GETT NG TO KNOW THE HANDHELD GPS/GSM
TRACKER
1 – Microphone
2 – USB connector
3 – Lock switch for the keyboard
4 – Speaker
5 – Keyboard
6 – Indicators
7 – Switch On / Switch Off button
8 – Reset Button
Button State Description
On Call Mute
Incoming Call Answer incoming call
On Call End call
Incoming Call Reject incoming call
On Call Decrease device speaker volume
Incoming Call Answer incoming call
On Call Increase speaker volume
Incoming Call Answer incoming call
ormal Track switch
Alarm On Call End call
ote: (7) By a push on the (Switch On / Switch Off) button, the device can be switched on or
off.
If you wish to
switch on the device, push the button shortly. After a short time the indicator
lights up and a special switch-on signal appears. GH1201 will switch immediately into the
standby mode.
If you wish to
switch off the device, push the button until all three indicators light up and then
release the button. ow you will hear the special switch off signal and the indicator will light up
red/green.
If you continue to push the button even after all three indicators light up the switch off process
will be cancelled and a cancellation signal can be heard.
5.1 CONNECT NG TO A PC
Before connecting the device to the PC it is recommended to install Track Assistant program at first. When
the software installed, GH1201 can be connected to a stationary or portable computer by using an USB
data cable. Please wait until the computer detects the new device and it will switch on automatically.
Afterwards, activate the
Track Assistant Software .
2
7
5
3
4
1
6
8

13
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
6. DEV CE ND CATORS
6.1 ND CAT NG THE STATUS
If you wish to correctly find out the parameters under which the device operates, observe as carefully as
possible the status of the three indicators.
Each status indicator consists of 2-coloured lamps - one of which is indicating a
failure (red) and the other
one is indicating a
process in progress (green).
The red
GPS/ALARM indicator, which signals at the time of Alarm (warning signal), is an exception.
Battery GSM GPS/ALARM
ndicator Off
Device on stand-by
Device on stand-by,
Connected to GSM
etwork
Device on stand-by
On
Battery fully charged
Flashing
Battery is charging
Trying to connect to
the GSM network,
Data Transfer,
Call Initiation
Device is trying to find
the location
Flashing twice at a
time
Device did find the
location
On
SIM error /
impossible to detect
the GSM network
(when on stand-by)
Flashing
SIM error /
impossible to detect
the GSM network
Alarm signal activated
(ALARM)
Flashing twice at a
time
Battery has reached a
critical level
Both indicators on
Device is switching off
/ reloading

14
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
6.2 ND CAT NG A BUTTON PUSH
If GH1201 is in standby mode you can check if the device is powered with a
short button push. The standby check is possible with each button on the
keyboard. If the device is powered, the Battery LED will lighten green.
Each button on the keyboard may have a special function and can be
configured with the
Track Assistant Configuration Tool . You can activate the
button function like this: After you have started to push the button, the
Battery
indicator turns on but there is no sound signal; if you keep on pushing the
button, the
GSM indicator turns on as well and a sound signal (a beep) can be
heard. ow the button has to be released and the device will execute the
button function.
The button function can be recalled directly: If you keep on pushing the button
after the first sound signal a second signal (deeper signal, cancellation
notification) will be heard and the
Battery indicator turns on. ow you can
release the button and none button function will be executed at all.
ote:If the keyboard is locked, it will not be possible to switch on the device at all. If you keep
on pushing the switch-on button, the device will switch on and off immediately. If the keyboard
is locked, the device does not react to any button push. The only exception is the Alarm button.
Please view the
Track Assistant Configuration Tool explanation for further details.
6.3 SOUND ND CAT ON
Action Sound signal
Function activated
one short beep
Function turned off
two beeps (high and low)
Error
one short low tone beep
Device switching on
special sound signal
Device switching off
special sound signal
Outgoing SMS Notification
one short beep
Outgoing SMS Error Notification
two low tone beeps
ncoming SMS Notification
special sound signals
Alarm Actuation Delay
special sound signal

15
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
7. SPEC AL SMS REQUESTS
Special requests – these are special text messages which are checking the GH1201 device status and
provide response via SMS to the requesting person. Example: The requesting person sends a SMS with the
content FIX? using a Mobile Phone to GH1201 and GH1201 will send back a status SMS.
The special requests are:
F X? – GH1201 starts the GPS receiver (if satellites are available), gets location and sends it (in case of
reception) to the requesting person. If no current coordinates will be detected GH1201 will send the latest
coordinates (date/time) from its internal memory. In the Log Tracking Modus stored data will be sent
immediately after request.
Location is available Location is not available*
* /A will only be sent if no data is available within the internal memory
NF? – GH1201 will send all information about it´s status.
GEO? – GH1201 will check in which Geofence zone1 it is and if it is inside - will send the Geofence zone
name.
Device is in the Zone(s) Device is out of the Zone(s)
L VE?
– When GH1201 receives such a request it returns back the information about how long it has been
working after last restart (in seconds).
1
To get valid responses the Geofence zones must be configured using TAMT (Track Assistant Monitoring Tool).
L VE!
Id:GH-1201 Imei:35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS
Fix:54.1215, 25.1324 Sat:9 Live:21511
Bat_Lvl:94
GEO!
Id:GH-1201 Imei:35397601XXXXXXX
Time:YYYY.MM.DD HH:MM:SS Fix:54.1215,
25.1324 Sat:9 Bat_Lvl:94
Geo: N/A
GEO!
Id:GH-1201 Imei:35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS Fix:54.1215,
25.1324 Sat:9 Bat_Lvl:94
Geo: ZONE_NAME
NF!
Id:GH-1201 Imei:35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS
Version:HH_1.X.X.X CF:1 Live:21511
Op:24602 Cell:030B Sig_Lvl:32 Bat_Lvl:94
F X!
Id:GH-1201 Imei:35397601XXXXXXX
Time:YYYY.MM.DD HH:MM:SS
Fix:54.1215, 25.1324 Sat:9 Op:24602
Cell:030B Sign_Lvl:26 Bat_Lvl:94
F X!
Id:GH-1201 Imei:35397601XXXXXXX
Time:YYYY.MM.DD HH:MM:SS Fix:N/A
Sat:N/A Op:24602 Cell:030B Sign_Lvl:26
Bat_Lvl:94

16
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
MN?
– AVIGO 2 Mobile avigator 6 ® (Version 6.3 or higher). After receiving such a SMS GH1201 will
send back a SMS to the Mobile Phone and you will be able to see the GH1201 position within the
AVIGO software (on the AVIGO Map).
ALARM:ON – GH1201 will enable the ALARM.
Location is available Location is not available
ALARM:OFF – GH1201 will disable the ALARM.
Location is available Location is not available
TRACK? – GH1201 will send all collected positions from internal memory to the Server (via GPRS, Server
Solution needed).
TRACK:ON – GH1201 will enable the „Event Tracking“ function.
TRACK:OFF – GH1201 will disable the „Event Tracking“ function.
TRACK:ON ,< P1 3>,< P2 4> -Starts “Event Tracking” function according to the parameters P1 and P2 (please
view footer).
2
Restriced to Mobile Phones operating on Symbian Series 60 basis. You need to have the licensed AVIGO Mobile
avigator 6 Software, Version 6.3 or higher , for this service. Please contact AVIGO or Teltonika for further
information.
3
P1 - Interval of position acquisition (sec.)
4
P2 - Duration of the “Event Tracking” function (min.)
M 60; 54.1215, 25.1324;;;;;;;
TRACK OFF!
Id:GH1201
Imei: 35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS
ALARM OFF!
Id:GH-1201
Imei:35397601XXXXXXX
Time:YYYY.MM.DD HH:MM:SS
Fix:54.1215, 25.1324 Sat:9 Op:24602
Cell:030B Sign_Lvl:26 Bat_Lvl:94
ALARM OFF!
Id:GH-1201
Imei:35397601XXXXXXX
Time:YYYY.MM.DD HH:MM:SS Fix:N/A
Sat:N/A Op:24602 Cell:030B Sign_Lvl:26
Bat_Lvl:94
ALARM!
Id:GH-1201
Imei:35397601XXXXXXX
Time:YYYY.MM.DD HH:MM:SS
Fix:54.1215, 25.1324 Sat:9 Op:24602
Cell:030B Sign_Lvl:26 Bat_Lvl:94
ALARM!
Id:GH-1201
Imei:35397601XXXXXXX Time:YYYY.MM.DD
HH:MM:SS Fix:N/A Sat:N/A Op:24602
Cell:030B Sign_Lvl:26 Bat_Lvl:94
TRACK ON!
Id:GH-1201
Imei: 35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS

17
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
Notification about Battery Level
When the function Send Notification about Battery Level is activate you will be informed depends of
configuration is chosen via SMS message about the level of the battery.
BAT! Id:GH1201
Imei: 35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS
Fix:54.1215, 25.1324 Sat:9 Op:24602
Cell:030B Sign_Lvl:26 Bat_Lvl:100
BAT! Id:GH1201
Imei: 35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS
Fix:54.1215, 25.1324 Sat:9 Op:24602
Cell:030B Sign_Lvl:26 Bat_Lvl:30
BAT! Id:GH1201
Imei: 35397601XXXXXXX
Time: YYYY.MM.DD HH:MM:SS
Fix:54.1215, 25.1324 Sat:9 Op:24602
Cell:030B Sign_Lvl:26 Bat_Lvl:60

18
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
8. TRACK ASS STANT SOFTWARE
8.1 Track Assistant Configuration Tool
The Track Assistant Configuration Tool will be installed together with the
device drivers. It is launched by clicking Start > All Programs > Teltonika >
Track Assistant Configuration Tool in the program menu. A special window
will inform about the activation of this program.
8.1.1 Configuration of GH1201 Using a PC
Please start the Track Assistant Configuration Tool. After GH1201 has been connected to the PC the
battery LED will start flashing in green.
Click the button Connect Tracker if you want to
configure your device directly from your PC using
an USB cable.
Click the button
Connect Modem if you did connect
a Teltonika GSM modem and wish to configure
your GH1201 remotely.
Click the button
Load Configuration if you want to
review a saved configuration file.
If you wish to switch to another configuration
window, always click the button Next.
When the device is connected to the computer,
the name of the last clicked button will change
to Disconnect Tracker, and by clicking this
button you can disconnect the device from the
computer.
If you wish to start, click the button Next.
1
2

19
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
Please read the information about the device
in the window User Registration: ME
Number and the Firmware Version of the
device program. Please enter the User Name,
which will be shown for this device within the
Track Assistant Monitoring Tool, the phone
number of the SIM card inserted into the
GH1201 and additional Emergency
nformation about the owner of the device.
Type the name of the device into the box
Device Name, which will be indicated as
device ID within all SMS messages sent by
GH1201 (please view Special SMS
Requests).
If a SIM card with an activated PI Code has
been inserted into the device, you need to
type it into the box S M Card of the window
Security.
The PI Code has no effect if configurations
are being rewritten but please note that if the
PI Code is not typed, it will prevent the
device from registering into the GSM network.
If the device is not registered in the GSM
network, it will not be possible to send or
receive SMS messages and dial phone
numbers as well receiving any calls.
You can turn the list of authorised SMS
numbers on or off within the box Device. If
the list is activated, the user must type in the
subscribers’ numbers, which the device will
respond to (format [phone]).
If this function has been activated, it will
protect GH1201 from unwelcome queries via
SMS (i.e. Fix?, Inf? Geo? etc.) by external
persons without authorization.
If the list of authorised numbers is not
activated, everybody is allowed to send
queries via SMS to the device, and the device
will always respond to them.
3
4

20
Handheld GPS
/GSM Tracker GH1201
User
Manual v1.
10
You can dedicate a function for each button
on the
Keyboard . Later on you can activate
this function by clicking on the respective
button on your GH1201. Please view the
section “Indicating a button push” in this
manual as well.
Call function allows you to call to a number
which should be typed into the Phone umber
field. Please use a format like:
[phone]
If you choose the
SMS function, a special
request field will appear. There you can chose
which kind of information the device will send
to the number typed into the
Phone Number
field (please view the chapter 7. Special SMS
requests for further information).
Alarm Off function will allow you to turn off an
Alarm which has been activated before with
the Alarm button.
Track Switch function will turn on / turn off the
Event Tracking function.
Emulate Modem function will switch the device
into the modem mode when GH1201 is
connected to a PC.
Please note: If you set the button Alarm
activation method to Call, window 7 of this
Configuration Tool will not open.
By ticking next to Vibration, you can activate
a vibro. You can also activate a signal warning
about incoming or outgoing SMS messages.
Choose the ringing tone of the device and set
the levels of the ring (Ring Level, 5 = loudest
level) and speaker (Speaker Level 10 =
loudest level).
5
6