Teltonika GH5200 User manual

GH5200 User Manual
V1.0

2
Table of contents
1INTRODUCTION................................................................................................................... 7
1.1 ATTENTION............................................................................................................................ 7
1.2 BRIEF DESCRIPTION.................................................................................................................. 8
1.3 LEGAL NOTICE........................................................................................................................ 8
1.4 ABOUT DOCUMENT ................................................................................................................. 8
2BASIC DESCRIPTION .......................................................................................................... 11
2.1 PACKAGE CONTENTS.............................................................................................................. 11
2.2 BASIC CHARACTERISTICS ......................................................................................................... 11
2.3 TECHNICAL FEATURES............................................................................................................. 12
2.4 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY................................................................... 12
2.5 ELECTRICAL CHARACTERISTICS.................................................................................................. 13
3CONNECTION .................................................................................................................... 14
3.1 HOW TO INSERT SIM CARD AND CONNECT THE BATTERY INTO GH5200 DEVICE:............................... 14
3.2 INSTALLING GH5200 DRIVERS ................................................................................................ 15
4OPERATIONAL BASICS ....................................................................................................... 17
4.1 OPERATIONAL PRINCIPLES....................................................................................................... 17
4.2 SLEEP MODES....................................................................................................................... 17
4.2.1 GPS Sleep mode ......................................................................................................... 17
4.2.2 Deep Sleep mode ....................................................................................................... 17
4.2.3 Online Deep Sleep mode............................................................................................ 18
4.2.4 Ultra Deep Sleep mode .............................................................................................. 18
4.3 FEATURES............................................................................................................................ 18
4.3.1 Alarm ......................................................................................................................... 18
4.3.2 ManDown .................................................................................................................. 19
4.3.3 OverSpeeding............................................................................................................. 19
4.3.4 Movement Event........................................................................................................ 19
4.4 VOICE CALL.......................................................................................................................... 19
4.5 TRACKING ON/OFF ............................................................................................................... 20
4.6 BLUETOOTH......................................................................................................................... 20
4.7 AUTO GEOFENCE .................................................................................................................. 20
4.8 MANUAL GEOFENCE.............................................................................................................. 20
4.9 USER INTERFACE................................................................................................................... 20
4.10 KEYBOARD........................................................................................................................... 20
5CONFIGURATION............................................................................................................... 20
5.1 CONFIGURATOR.................................................................................................................... 20
5.1.1 Main Buttons description: ......................................................................................... 22
5.1.2 Keyword SMS (GPRS) commands:.............................................................................. 22
5.1.3 Keyword configuration with TCP ............................................................................... 22
5.2 STATUS INFO........................................................................................................................ 23
5.3 SECURITY INFO ..................................................................................................................... 23
5.4 SYSTEM SETTINGS.................................................................................................................. 24
5.5 GPRS................................................................................................................................. 26
5.6 SMS/CALL SETTINGS............................................................................................................. 27
5.7 GSM OPERATORS,ROAMING,BLACKLIST OPERATOR LIST ............................................................ 28
5.8 DATA ACQUISITION MODE SETTINGS ........................................................................................ 30
5.9 FEATURES SETTINGS............................................................................................................... 34
5.9.1 Alarm ......................................................................................................................... 34
5.9.2 Over Speeding............................................................................................................ 35
5.9.3 ManDown .................................................................................................................. 35
5.9.4 Movement Event........................................................................................................ 36
5.10 AUTOGEOFENCING SETTINGS .................................................................................................. 36

3
5.11 MANUAL GEOFENCE.............................................................................................................. 37
5.12 BLUETOOTH......................................................................................................................... 39
5.12.1 General functionality................................................................................................. 39
5.12.2 How to connect Bluetooth Hands Free adapter to GH5200 device........................... 40
5.12.2.1 Bluetooth settings configuration...................................................................................... 40
5.12.2.2 Connecting Bluetooth Hands Free adapter ...................................................................... 42
5.12.3 Logging the GH5200 device using your mobile phone .............................................. 42
5.12.4 Device debug over Android smartphone ................................................................... 43
5.13 SMS EVENTS........................................................................................................................ 45
5.14 SMS TEXT........................................................................................................................... 46
5.15 I/O SETTINGS....................................................................................................................... 47
5.15.1 Operand On Exit ........................................................................................................ 48
5.15.2 Operand On Entrance................................................................................................ 48
5.15.3 Operand On Both ...................................................................................................... 48
5.15.4 Operand Monitoring ................................................................................................. 49
5.15.5 Operand On Hysteresis.............................................................................................. 49
5.15.6 Operand On Change.................................................................................................. 49
5.15.7 Operand On Delta Change ........................................................................................ 50
5.15.8 Avg const (Averaging parameter description)........................................................... 50
5.16 USER INTERFACE................................................................................................................... 51
5.17 KEYBOARD........................................................................................................................... 55
6SMS/GPRS COMMAND LIST .............................................................................................. 56
6.1 SMS/GPRS COMMAND LIST................................................................................................... 56
6.1.1 getinfo ....................................................................................................................... 58
6.1.2 getver......................................................................................................................... 59
6.1.3 getstatus.................................................................................................................... 59
6.1.4 getgps ........................................................................................................................ 59
6.1.5 ggps ........................................................................................................................... 60
6.1.6 getparam ................................................................................................................... 60
6.1.7 setparam.................................................................................................................... 60
6.1.8 flush #,#,#,#,#,#,#....................................................................................................... 60
6.1.9 countrecs ................................................................................................................... 61
6.1.10 deleterecords............................................................................................................. 61
6.1.11 battery....................................................................................................................... 61
6.1.12 btgetlist # .................................................................................................................. 61
6.1.13 setkey # # .................................................................................................................. 62
6.1.14 delkey # # .................................................................................................................. 62
6.1.15 bbread # .................................................................................................................... 62
6.1.16 bbinfo # ..................................................................................................................... 62
6.1.17 sdformat.................................................................................................................... 62
7PARAMETER LIST............................................................................................................... 63
7.1 SYSTEM PARAMETERS ............................................................................................................ 63
7.1.1 Sleep Mode (ID=102) ................................................................................................. 63
7.1.2 Sleep timeout (ID=103) .............................................................................................. 63
7.1.3 Static Navigation (ID=106)......................................................................................... 63
7.1.4 Saving/Sending without time synchronization (ID=107) ........................................... 63
7.1.5 GNSS Source (ID=109)................................................................................................ 63
7.1.6 Synchronization settings (ID=900) ............................................................................. 64
7.1.7 NTP Resync (ID=901).................................................................................................. 64
7.1.8 NTP server 1 (ID=902) ................................................................................................ 64
7.1.9 NTP server 2 (ID=903) ................................................................................................ 64
7.2 GPRS PARAMETERS .............................................................................................................. 65
7.2.1 Sorting (ID=1002)....................................................................................................... 65
7.2.2 Open Link Timeout (ID=1000) .................................................................................... 65
7.2.3 Server Response Timeout (ID=1001) .......................................................................... 65
7.2.4 SIM GPRS content activation (ID=2000) .................................................................... 65

4
7.2.5 SIM APN Name (ID=2001).......................................................................................... 66
7.2.6 SIM APN Username (ID=2002)................................................................................... 66
7.2.7 SIM APN Password (ID=2003).................................................................................... 66
7.2.8 Domain (ID=2004)...................................................................................................... 66
7.2.9 Target Server Port (ID=2005)..................................................................................... 66
7.2.10 Protocol (ID=2006) .................................................................................................... 67
7.2.11 Backup Server Domain (ID=2007) ............................................................................. 67
7.2.12 Backup Server Port (ID=2008) ................................................................................... 67
7.2.13 Backup Server Protocol (ID=2009)............................................................................. 67
7.2.14 Backup Server Mode (ID=2010)................................................................................. 67
7.2.15 FOTA WEB status (ID=13003).................................................................................... 67
7.2.16 FOTA WEB Domain (ID=13000) ................................................................................. 68
7.2.17 FOTA WEB port (ID=13001) ...................................................................................... 68
7.2.18 FOTA WEB Period (min) (ID=13002) .......................................................................... 68
7.3 SMS/CALL SETTINGS............................................................................................................. 68
7.3.1 SMS data sending settings (ID=3000)........................................................................ 68
7.3.2 Data send number (ID=3001)..................................................................................... 68
7.3.3 Authorized phone numbers (ID=4000-4199).............................................................. 69
7.3.4 GSM Predefined Numbers (ID=6000-6009)................................................................ 69
7.3.5 SMS Login (ID=3003).................................................................................................. 69
7.3.6 SMS Password (ID=3004)........................................................................................... 69
7.3.7 Incoming call action (ID=3005) .................................................................................. 69
7.3.8 SMS Event Time Zone (ID=3006)................................................................................ 70
7.3.9 Detect Number Type By Plus Symbol (ID=4999) ........................................................ 70
7.4 GSM OPERATORS................................................................................................................. 70
7.4.1 SIM Roaming Operator List (ID=5000-5049).............................................................. 70
7.4.2 Black List (ID=5500-5549) .......................................................................................... 70
7.5 DATA ACQUISITION MODES PARAMETERS.................................................................................. 71
7.5.1 Home Network GSM operator code “Vehicle on STOP” parameters ......................... 71
7.5.1.1 Min Period (ID=10000) ....................................................................................................... 71
7.5.1.2 Min Saved Records (ID=10004) .......................................................................................... 71
7.5.1.3 Send Period (ID=10005)...................................................................................................... 71
7.5.2 Home Network GSM operator code “Vehicle MOVING” parameters ........................ 71
7.5.2.1 Min Period (ID=10050) ....................................................................................................... 71
7.5.2.2 Min Distance (ID=10051).................................................................................................... 71
7.5.2.3 Min Angle (ID=10052)......................................................................................................... 72
7.5.2.4 Min Speed Delta (ID=10053) .............................................................................................. 72
7.5.2.5 Min Saved Records (ID=10054) .......................................................................................... 72
7.5.2.6 Send Period (ID=10055)...................................................................................................... 72
7.5.3 Roaming Network GSM operator code “Vehicle on STOP” parameters .................... 73
7.5.3.1 Min Period (ID=10100) ....................................................................................................... 73
7.5.3.2 Min Saved Records (ID=10104) .......................................................................................... 73
7.5.3.3 Send Period (ID=10105)...................................................................................................... 73
7.5.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................... 73
7.5.4.1 Min Period (ID=10150) ....................................................................................................... 73
7.5.4.2 Min Distance (ID=10151).................................................................................................... 74
7.5.4.3 Min Angle (ID=10152)......................................................................................................... 74
7.5.4.4 Min Speed Delta (ID=10153) .............................................................................................. 74
7.5.4.5 Min Saved Records (ID=10154) .......................................................................................... 74
7.5.4.6 Send Period (ID=10155)...................................................................................................... 75
7.5.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................... 75
7.5.5.1 Min Period (ID=10200) ....................................................................................................... 75
7.5.5.2 Min Saved Records (ID=10204) .......................................................................................... 75
7.5.5.3 Send Period (ID=10205)...................................................................................................... 75
7.5.6 Unknown Network GSM operator code “Vehicle MOVING” parameters .................. 75
7.5.6.1 Min Period (ID=10250) ....................................................................................................... 75
7.5.6.2 Min Distance (ID=10251).................................................................................................... 76
7.5.6.3 Min Angle (ID=10252)......................................................................................................... 76
7.5.6.4 Min Speed (ID=10253)........................................................................................................ 76
7.5.6.5 Min Saved Records (ID=10254) .......................................................................................... 77

5
7.5.6.6 Send Period (ID=10255)...................................................................................................... 77
7.6 FEATURES PARAMETERS ......................................................................................................... 77
7.6.1 Alarm ......................................................................................................................... 77
7.6.1.1 Scenario Settings (ID=11710).............................................................................................. 77
7.6.1.2 Send SMS To (ID=7245) ...................................................................................................... 77
7.6.1.3 SMS Text (ID=8245) ............................................................................................................ 77
7.6.1.4 Call Settings (ID=11711) ..................................................................................................... 78
7.6.1.5 Call to (ID=11712)............................................................................................................... 78
7.6.2 Overspeeding scenario parameters ........................................................................... 78
7.6.2.1 Overspeeding priority (ID=11100) ...................................................................................... 78
7.6.2.2 Max Speed (ID=11104) ....................................................................................................... 78
7.6.2.3 Overspeeding Send SMS To (ID=7032) ............................................................................... 78
7.6.2.4 Overspeeding SMS Text (ID=8032) ..................................................................................... 79
7.6.3 ManDown scenario parameters ................................................................................ 79
7.6.3.1 Scenario Settings (ID=12100).............................................................................................. 79
7.6.3.2 Position (ID=12100)............................................................................................................ 79
7.6.3.3 Angle (ID=12102)................................................................................................................ 79
7.6.3.4 Timeout (ID=12103)............................................................................................................ 79
7.6.3.5 Send SMS To (ID=7222) ...................................................................................................... 79
7.6.3.6 SMS Text (ID=8222) ............................................................................................................ 79
7.6.3.7 Call Settings (ID=12104) ..................................................................................................... 80
7.6.3.8 Call to (ID=12105)............................................................................................................... 80
7.7 AUTOGEOFENCING SCENARIO PARAMETERS ............................................................................... 80
7.7.1 AutoGeofencing priority (ID=20000).......................................................................... 80
7.7.2 Eventual Records (ID=20002)..................................................................................... 80
7.7.3 AutoGeofence event generating (ID=20001) ............................................................. 81
7.7.4 Radius (ID=20004) ..................................................................................................... 81
7.7.5 AutoGeofence Send SMS to (ID=7030)....................................................................... 81
7.7.6 SMS Text (ID=8030) ................................................................................................... 81
7.7.7 Call Settings (ID=12104) ............................................................................................ 82
7.7.8 Call to (ID=12105) ...................................................................................................... 82
7.8 MANUAL GEOFENCE.............................................................................................................. 82
7.8.1 First Geozone parameters.......................................................................................... 82
7.8.1.1 #1 Geozone Manual Geofencing priority (ID=20100):........................................................ 82
7.8.1.2 #1 Geozone Manual Geofence event generating (ID=20101) ............................................ 83
7.8.1.3 #1 Geozone Eventual Records (ID=20102) ......................................................................... 83
7.8.1.4 #1 Geozone Frame border (ID=20103)............................................................................... 83
7.8.1.5 #1 Geozone Shape type (ID=20104) ................................................................................... 84
7.8.1.6 #1 Geozone Radius (ID=20105).......................................................................................... 84
7.8.1.7 #1 Geozone X1 (ID=20106)................................................................................................. 85
7.8.1.8 #1 Geozone Y1 (ID=20107) ................................................................................................. 85
7.8.2 Other Geozones ......................................................................................................... 86
7.8.2.1 Send SMS to #1-5 Geozone (ID=7025-7029), #6-50 Geozone (ID=7071-7115).................. 86
7.8.2.2 SMS Text #1-5 Geozone (ID=8025-8029), #6-50 Geozone (ID=8071-8115)....................... 86
7.9 USER INTERFACE................................................................................................................... 87
7.9.1 Indication Scenario (12500)....................................................................................... 87
7.9.2 Sleep Config (12501).................................................................................................. 87
7.9.3 Led (12502) ................................................................................................................ 87
7.9.4 Vibration (12503)....................................................................................................... 87
7.9.5 Period (12504) ........................................................................................................... 87
7.9.6 On (ms) (12505) ......................................................................................................... 87
7.9.7 Off (ms) (12506)......................................................................................................... 88
7.9.8 Repeat (12507) .......................................................................................................... 88
7.10 KEYBOARD........................................................................................................................... 91
7.11 ACTIONS ............................................................................................................................. 93
7.11.1 SMS Action ................................................................................................................ 93
7.11.1.1 SMS Send to (7249) .......................................................................................................... 93
7.11.1.2 SMS Text (8249)................................................................................................................ 93
7.11.2 Call Action ................................................................................................................. 93
7.11.2.1Call to (13010) .................................................................................................................. 93
7.12 BLUETOOTH......................................................................................................................... 93

6
7.12.1.1 BT Radio (ID=800)............................................................................................................. 93
7.12.1.2 Local name (ID 801).......................................................................................................... 93
7.12.1.3 Local PIN (ID=802) ............................................................................................................ 94
7.12.1.4 Security mode (ID=803).................................................................................................... 94
7.12.1.5 External MAC (ID=804) ..................................................................................................... 94
7.12.1.6 External name (ID=805).................................................................................................... 95
7.12.1.7 External PIN (ID=806) ....................................................................................................... 95
7.12.1.8 Connection mode (ID=807) .............................................................................................. 95
7.12.1.9 Authorized devices MAC list (ID=830 - 834) ..................................................................... 96
7.13 I/O PARAMETERS.................................................................................................................. 96
7.13.1 I/O#1 property parameter priority (ID=50010) ......................................................... 96
7.13.2 I/O#1 operand (ID=50011) ........................................................................................ 96
7.13.3 I/O#1 High level (ID=50012) ...................................................................................... 97
7.13.4 I/O#1 Low level (ID=50013)....................................................................................... 97
7.13.5 I/O#1 Event only (ID=50014) ..................................................................................... 97
7.13.6 I/O#1 averaging length (ID=50015) .......................................................................... 98
7.13.7 I/O#1 send SMS (ID=7001) ........................................................................................ 98
7.13.8 I/O#1 SMS text (ID=8001).......................................................................................... 98
7.13.9 I/O elements parameters and types.......................................................................... 99
8DEBUG MODE ................................................................................................................. 104
9CHANGE LOG................................................................................................................... 105

7
1INTRODUCTION
1.1 Attention
Operate the device in suitable conditions
Do not use the device where mobile connectivity is forbidden.
Road safety first
Comply with local traffic laws, always hold your hands on a steering wheel when
using a device. Your safety is of utmost importance when you drive.
Interference
All wireless devices are sensitive to electromagnetic interference, as a result wireless
devices affect the performance of each other.
Limit the use of device in hospitals
Please follow all restrictions. Turn off the device in the vicinity of medical devices
when required.
Limit the use of device in vehicles
Please follow all restrictions. Wireless devices can interfere with other electronic
equipment in vehicles.
Be cautious near flammable materials and liquids
Charging precautions
SELV LPS chargers, personal computers or laptops that device will be connected to
must comply with the requirements of IEC 60950:2005 standard.
Use only original batteries
Using uncertified manufacturer or different type batteries may cause an explosion.
Use batteries safely
Protect batteries from moisture. Place them in a cool and dry place when storing.
Avoid extensive operation at high temperatures. Do not attempt charging battery
directly from the electrical mains. All utilised batteries shall comply with IEC 62133.
Power supplies
Power supply circuits used to charge the device connection must have safeguards,
which prevent power leakage, short circuits or incorrect electrical grounding. Any
used switches ought to be installed in a readily accessible location. Power must be
uninterrupted and the distance between the contacts must be 3 mm or larger.
Remove device safely
Device must be disconnected from computer or charger by unplugging the magnetic
USB cable from the device.

8
Other
In order to prevent device from mechanical damage it is advisable to transport it in a
shock–resistant packaging. If device stopped working properly regardless of the
settings only a qualified specialist can help. It is recommended to contact your local
seller or your UAB Teltonika manager in such case.
1.2 Brief description
GH5200 is a handheld tracking device with built-in functions and characteristics of a mobile
phone. This device is intended for the surveillance and protection of people, cargo and valuables.
GNSS receiver is able to identify current location and send it to an operations center or a person.
In case of an emergency the device can activate the alarm function or make a voice call. Device is
able to execute various tasks through GSM network and GNSS system. Easy installation,
operation and user friendly design will help perform the user’s desired tasks easier.
1.3 Legal Notice
Copyright © 2019 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the GH5200 device.
Acronyms and terms used in this document:
▪AC/DC –Alternating Current/Direct Current
▪ACC –Accessories
▪AVL - Automatic vehicle location: means for automatically determining and transmitting
the geographic location of a vehicle.
▪AVL packet: Data packet which is being sent to the server during data transmission.
▪APN - Access Point Name: the name of a gateway between 3GPP mobile network and
Internet or another computer network.
▪CAN - Controller Area Network: a vehicle bus standard designed to allow microcontrollers
and devices to communicate with each other in applications without a host computer.
▪CNG - Compressed Natural Gas: methane stored at high pressure.
▪COM port - serial communication interface that is used to transfer information to/from
devices such as modems, terminals and various peripherals.
▪DTC - Diagnostic Trouble Code
▪ESP - Electronic Stability Program: is a technology that improves a vehicle's stability by
detecting and reducing loss of traction (skidding).
▪ETA - Estimated Time of Arrival
▪FAP - Particulate Filter
▪FOTA - Firmware-Over-The-Air

9
▪GNSS –Global Navigation Satellite System: a system with global coverage that uses
satellites to provide autonomous geo-spatial positioning.
▪GPS –Global Positioning System: a worldwide satellite navigational system formed by 24
satellites orbiting the earth and their corresponding receivers on the earth.
▪GPRS –General Packet Radio Service: a standard for wireless communications which runs
at speeds up to 115 kilobits per second.
▪GSM –Global System for Mobile Communications: one of the leading digital cellular
systems. GSM uses narrowband TDMA, which allows eight simultaneous calls on the
same radio frequency.
▪I/O –Input/Output
▪ICCID - Integrated Circuit Card Identifier: a unique serial number that is stored on the SIM
card.
▪IMEI - International Mobile Equipment Identity: is a unique number that is used to
identify 3GPP mobile phones.
▪LED - Light Emitting Diode
▪MAC –Media Access Control. Hardware address which uniquely identifies each node of
the network. In IEEE 802 networks, the Data Link Control (DCL) layer of the PSO Reference
Model is divided into two sub-layers: the Logical Link Control (LLC) layer and the Media
Access Control layer. The MAC layer interfaces directly with the network medium.
Consequently, each different type of network medium requires a different MAC layer.
▪MAF - Mass Airflow Sensor: a device used to measure the mass flow rate of air entering a
fuel-injected internal combustion engine.
▪NITZ - Network Identity and Time Zone: a mechanism for provisioning local time and date,
time zone and DST offset, as well as network provider identity information, to mobile
devices via a wireless network.
▪NMEA: a data specification for communication between electronics such as echo
sounder, sonars, anemometer, gyrocompass, autopilot, GPS receivers.
▪NTP - Network Time Protocol: networking protocol for clock synchronization between
computer systems over packet-switched, variable-latency data networks.
▪OBD - On-board Diagnostics: a vehicle's self-diagnostic and reporting capability, which
gives access to the status of the various vehicle subsystems.
▪PC –Personal Computer
▪PCB - Printed Circuit Board
▪PIN - Personal Identification Number
▪RFID - Radio-Frequency Identification: a method that uses electromagnetic fields to
automatically identify and track tags attached to objects.
▪RPM - Engine Revolutions Per Minute
▪RTC - Real-Time Clock
▪SELV - Safety Extra Low Voltage: an electrical system in which the voltage cannot exceed
50 VAC or 120 VDC under normal conditions, and under single-fault conditions, including
earth faults in other circuits.
▪SMS –Short Message Service: the transmission of short text messages to and from a
mobile phone, fax machine and/or IP address.
▪SIM - Subscriber Identification Module: an integrated circuit card that is intended to
securely store the information which is used to identify and authenticate subscribers on
mobile telephony devices.
▪TCP –Transmission Control Protocol –one of the main protocols in TCP/IP networks.
Whereas the IP protocol deals only with packets, TCP enables two hosts to establish a

10
connection and exchange streams of data. TCP guarantees delivery of data and also
guarantees that packets will be delivered in the same order in which they were sent.
▪TMO - Timeout
▪UDP –User Datagram Protocol –a connectionless protocol that, like TCP, runs on top of
IP networks. Provides very few error recovery services, offering instead a direct way to
send and receive datagrams over IP network.
▪Record –AVL data stored in FMB memory. AVL data contains GNSS and I/O information.

11
2BASIC DESCRIPTION
GH5200 is an AUTONOMOUS personal tracker with GNSS, GSM and Bluetooth connectivity,
device has high quality voice communication feature and modern slim design.
The tracker is designed for Lone Worker protection. Everyone who performs activity
without close or direct supervision of others: healthcare visitors, maintenance workers, self-
employed or working out of standard work hours employees.
2.1 Package contents
The GH5200 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
▪GH5200 device;
▪3.7 V 1050 mAh rechargeable Li-ion battery;
▪Micro USB cable;
▪Screw driver.
2.2 Basic characteristics
GSM / GPRS / GNSS features:
▪Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
▪GPRS class 12 (Up to 240 kbps);
▪SMS (text, data);
▪Integrated GNSS receiver;
▪Up to -165 dBm GNSS receiver sensitivity.
Hardware features:
▪Built-in accelerometer;
▪Panic button;
▪Built-in Bluetooth 3.0 and 4.0);
▪Internal High Gain GNSS antenna;
▪Internal High Gain GSM antenna;
▪1050 mAh Li-ion rechargeable 3.7 V battery.
▪Slim casing;
▪Magnetic USB cable.
Firmware features:
▪Fast position fix;
▪Two way voice communication;
▪Man-down detection;
▪50 Manual Geofence zones;
▪Auto Geofencing;
▪Action on call feature;
▪Configurable 3 LED status indication;
▪Authorized numbers;
▪Time synchronization over NTP and NITZ;
▪Real time tracking;
▪Smart data acquisition based on:

12
oTime;
oSpeed;
oAngle;
oDistance;
oMovement or any other I/O event;
▪Sending acquired data via GPRS;
▪GPRS and SMS I/O events;
▪Configurable using Secured SMS Commands.
2.3 Technical features
Part name
Physical specification
Technical details
LED
3 status LEDs
Energy consumption1:
GPRS: average 52.31 mA;
Nominal: average 45.10 mA;
GNSS Sleep: average 10.12 mA;
Deep Sleep: average 3.02 mA;
Online Deep Sleep: average 3.78 mA;
Ultra Deep Sleep: average 1.82 mA.
Battery charge current:
average 733 mA;
Operation temperature:
-25 °C .. +65 °C
Storage temperature:
-40 °C .. +70 °C
Storage relative humidity:
5 .. 95 % (no condensation)
USB
Micro USB socket
GNSS
Internal GNSS antenna
GSM
Internal GSM antenna
Microphone
and speader
Internal microphone and
speader
BUTTON
5 configurable buttons
2.4 Technical Information about internal battery
Table 1. Li –ion rechargeable battery, 3.7 V, 1050 mAh.
Internal back-up
battery
Battery voltage V
Nominal capacity (mAh)
Power (Wh)
Charging
temperature °C
Li-ion rechargeable
battery
3.70
1050
3.885
0 –45
1
Energy consumption has been tested by running GH5200 on battery (4.2 V).

13
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery Disposal instructions:
Battery should not be disposed of into general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose
them into a battery recycle bin commonly found in supermarkets.
Warranty: batteries are covered by 6 months warranty support.
2.5 Electrical characteristics
Table 2. GH5200 electrical characteristics
Characteristic description
Value
Supply Voltage:
Min.
Typ.
Max.
Unit
In recommended operating conditions
4.5
5.0
5.5
V DC

14
3CONNECTION
3.1 How to insert SIM card and connect the battery into GH5200 device:
Remove GH5200 cover.
Insert Micro SIM card as shown. Battery has
to be disconnected at this point.
Insert the battery.
Reatach the cover and tighten the srew
Note: SIM card insertion/removal must be performed when GH5200 device is
powered off –with external voltage and battery disconnected. Otherwise SIM
card may be damaged.

15
3.2 Installing GH5200 drivers
Table 3. Software requirements:
Operating system
Version
MS .NET Framework version
Windows XP with SP3
or later
32 bit and
64 bit
32 bit
64 bit
MS .NET Framework 4
https://www.microsoft.com/en-
US/Download/confirmation.aspx?id=17718
http://avl1.teltonika.lt/downloads/software/Framework/.NET%20Framew
ork%204/dotNetFx40_Full_x86_x64.exe
With MS .NET Framework 4 update KB2468871-v2 update
https://www.microsoft.com/en-us/download/details.aspx?id=3556
http://avl1.teltonika.lt/downloads/software/Framework/.NET%20Framew
ork%204%20update%20KB2468871-v2/
NDP40-KB2468871-v2-x86.exe
NDP40-KB2468871-v2-x64.exe or NDP40-KB2468871-v2-IA64.exe
Windows Vista
Windows 7
Windows 8.1
Windows 10
32 bit and
64 bit
MS .NET Framework 4.6.2
https://www.microsoft.com/en-
us/download/confirmation.aspx?id=53344
http://avl1.teltonika.lt/downloads/software/Framework/.NET%20Framew
ork%204.6.2/NDP462-KB3151800-x86-x64-AllOS-ENU.exe
Drivers:
Please download COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FMB1/MS_USB_ComPort_Driver_exe_v1.1032.3.zip
Installing drivers:
Extract and run MS_USB_ComPort_Driver_exe_v1.1032.3. This driver is used to control
GH5200 device connected to the computer. Click Next in driver installation window:
Figure 2 Driver installation window 1
This will launch device driver installation wizard. In the following window click Install:

16
Figure 3 Driver installation window 2
Setup will continue installing drivers and eventually the confirmation window will appear.
Click Close to complete the setup:
Figure 4 Driver installation window 3
You are now ready to use the device on your computer.

17
4OPERATIONAL BASICS
4.1 Operational principles
GH5200 module is designed to acquire records and send them to the server. Records
contain GNSS data and I/O information. Module uses GNSS receiver to acquire GNSS data and is
run in three (time-based, distance-based and angle-based) acquisition modes. Please note that if
GH5200 loses connection to GNSS satellites it continues to make records, however coordinate in
these records remains the same (last known coordinate). All data is stored into flash memory and
later can be transmitted via GPRS.
GPRS and SMS settings are described in following sections. GH5200 communicates with
server using Codec 8 data protocol. GH5200 can be managed by SMS commands, which are
described in SMS command section.
4.2 Sleep modes
There are four sleep modes: GPS sleep, Deep sleep, Online Deep sleep and Ultra Deep
sleep mode.
4.2.1 GPS Sleep mode
GH5200 is able to go into GPS sleep mode if such mode is enabled.
Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached
and all conditions for GPS sleep mode are met, the device goes into sleep mode. When in GPS
sleep mode, GH5200 turns GPS module off and continues making new periodic records.
GH5200 will enter GPS sleep mode if ALL of these conditions are met:
▪GH5200 is configured to work in GPS Sleep mode and sleep timeout is reached;
▪Device time is synchronized with GNSS satellites and GPS fix is obtained;
▪Movement is not detected by the accelerometer;
▪Forced wakeup is not set;
▪There are no SMS messages being received.
GH5200 exits GPS sleep mode if following condition is true:
▪Movement by accelerometer is detected.
4.2.2 Deep Sleep mode
When in deep sleep mode, GH5200 sets the GNSS receiver to sleep mode and turns off
GSM/GPRS module (hence it is not possible to wake up device via SMS). Records with last known
coordinate being saved and sent to AVL server - GSM/GPRS module is turned on to send data and
then it is turned off. Please note that power saving depends on two configurable parameters:
Send Period and Minimum Record Saving Period in "X on Stop Mode". When records are sent
successfully in deep sleep mode, open link timeout counter will be skipped and GH5200 will
enter deep sleep mode immediately.
Because a lot of functions are disabled in deep sleep mode following I/O elements are
disabled from records that are generated in this mode: GSM Signal, GNSS Status, GNSS PDOP,

18
GNSS HDOP, GSM CellID, GSM Area Code, Active GSM Operator and ICCID. GH5200 can enter
deep sleep mode if ALL of these conditions are met:
▪GH5200 is configured in Deep Sleep mode and sleep timeout is reached;
▪Device time is synchronized with GNSS satellites and GPS fix is obtained;
▪Movement is not detected by the accelerometer;
▪Min. Record Saving Period (Data Acquisition Mode settings) must be larger than Open
Link Timeout parameter, so that GH5200 could close GPRS link;
▪The difference between Send Period (Data Acquisition Mode settings) and Open Link
Timeout must be more than 90 seconds, so that GH5200 could close GPRS link within at
least 90 seconds;
▪Forced wakeup is not set;
▪There are no SMS messages being received;
▪Data socket(s) are closed;
▪Data sending is not in progress;
▪FOTA is not in progress.
GH5200 exits deep sleep mode if following condition is true:
•Movement by accelerometer is detected;
4.2.3 Online Deep Sleep mode
In this mode the device works as in deep sleep mode, but without deregistering from GSM
network. GSM part stays powered so this increases power consumption. In this mode device
should send/receive SMS and make/accept calls. It does not close GPRS context if one was
previously opened. Conditions to enter online deep sleep mode are the same as entering deep
sleep mode. GH5200 exits online sleep mode if following condition is true. GH5200 exits online
sleep mode if following condition is true:
▪Movement by accelerometer is detected;
4.2.4 Ultra Deep Sleep mode
Conditions to enter ultra deep sleep mode, where GPS and GSM modem are turned off and
device functions are suspended for maximum battery saving, are the same as entering Deep
Sleep mode.
GH5200 exits ultra deep sleep mode only when movement is detected by accelerometer.
Movement source is not taken into account in this case.
4.3 Features
Using available features can greatly increase GH5200 utilization.
4.3.1 Alarm
Alarm is a feature that can be only triggered by a pressing the configured button. When the
alarm is triggered, an event with IO ID 236 is generated. Following a configured button press to
activate the Alarm an SMS can be sent and a call can be performed.
Data sending follows in this order: 1. GPRS; 2. SMS; 3. Call.
There are “GPRS and SMS”and “GPRS or SMS”notification methods.

19
If selected method “GPRS or SMS”. At first device tries to connect to GPRS context using
configured APN. If it does not connect device sends sms event to configured number.
If method is “GPRS and SMS”SMS will be sent in both cases, when GPRS has failed and
when records are sent to server.
These SMS sending methods are valid for these Events: Alarm; Man Down, Movement
Event and Over speeding.
4.3.2 ManDown
ManDown functionality gets current accelerometer data and calculates the angle between
offset position. Currently there are two positions: horizontal and Scanning is performed each
second. When calculated angle exceeds the configured angle value for 3 seconds an event is
generated with configured priority, device can make a voice call or send an SMS notification, if it
is configured. When the device returns to allowed base position an event with same priority is
generated.
4.3.3 OverSpeeding
This functionality prevents exceeding fixed speed limits and inspects the driver if required.
4.3.4 Movement Event
Movement Event functionality makes an eventual high priority record (and sends an optional SMS)
when device is stationary or in motion (depending on configured "Mode") for set Timeout (added to
"Movement Start/Stop Delays" accordingly).
Timeout is a configured amount of time (in seconds) after which an eventual high priority record is
generated.
Note: this timeout is added with Movement Start Delay if configured Mode is Movement Event or
with Movement Stop Delay if configured Mode is No Movement Event.
Movement Event mode generates a record after the start of movement whereas No Movement
Event generates a record after the stop of movement.
4.4 Voice call
Device has integrated microphone and a speaker, which allows you to perform two voice
call. Voice call is available in normal and loud speaker modes.
Normal speaker mode –when call is answered with low speaker volume, default speaker
volume is set to 40%.
Loud speaker Volume. –when call is answered with loud speaker volume, default speaker
volume is set to 100%.
Figure 5 Volume control

20
4.5 Tracking On/Off
This keyboard functionality, which turns on and off GNSS module on konfigured key
pressed.
4.6 Bluetooth
Bluetooth can work in two modes - slave or master. When in master mode Bluetooth can
connect to the defined hands-free system. When working in slave mode - Bluetooth can accept
incoming pairing requests from external devices.
NOTE: GH5200 supports ONE connection at a time.
NOTE: GH5200 can see up to 10 available devices. If there are more than 10
devices the scanning list may change.
4.7 Auto Geofence
Auto Geofence is a feature that notifies the user if the object has left the zone that was
generated within set radius around the device. This feature is based on the last known position
after the movement has stopped. More details about Auto Geofencing can be found in chapter
5.10.
4.8 Manual Geofence
Geofencing is another feature which is highly customizable and can detect whenever car
enters or leaves customized areas. More details about Geofencing can be found out in chapter
5.11.
4.9 User Interface
This section allows to configure GH5200’s LED, audio and vibration indication for each
scenario using the configurator. More information about this can be found in Chapter 5.16
4.10 Keyboard
There are five configurable buttons in GH5200 - Alarm Button, Power Button, 1, 2 and 3
buttons. More information about this can be found in Chapter 5.17
5CONFIGURATION
5.1 Configurator
At first GH5200 device will have default factory settings set. These settings should be
changed according to the user's needs.
Device can be configured to acquire and send data to server, in this case the GSM settings
shall be set in regards with GSM operator's information. If device GSM is unavailable, the device
will not be able to send the data and GH5200 will start storing records to flash memory. It is
possible to store up to 192000 data records within internal memory (when 100 MB are used to