Teltonika QSG TAP200 User manual

https://wiki.teltonika-networks.com/view/QSG_TAP200
QSG TAP200
Main Page > TAP Access Points > TAP200 > QSG TAP200
This Wiki page contains the online version of the Quick Start Guide (QSG) for the TAP200 Access
Point. Here you will find an overview of the various components for TAP200 device, hardware
installation instructions, first login information, device specifications, and general safety
information. It is highly recommended to acquaint yourself with the Quick Start Guide before using
the device.
Contents
• 1 Safety information
- 1.1 General
- 1.2 RF exposure
- 1.3 Operating conditions
- 1.4 Faulty and damaged products
- 1.5 Electrical safety
- 1.6 Product handling
• 2 Bottom view
• 3 AP Mounting Bracket Lock
• 4 TAP200 RJ45 Port
• 5 Video Quick Start Guide
• 6 Installation Guide
• 7 Mounting instruction
• 8 TAP200 Login to device
Safety information
Before starting operating the device, please review recommendations and precautions to minimize
the possibility of accidents. Safety precautions presented are supplementary and subject to the local
safety regulations. When various operations are executed on the device, the user must fully follow
the safety instructions and recommendations provided with the device.
General
Radio specifications
RF technologies Wi-Fi
Max RF power 20 dBm@WiFi 2.4G, 23 dBm@WiFi 5G
Integrated antennas specifications
Wi-Fi antennas 2x 2400-2500 MHz, peak gain < 4.9 dBi, omnidirectional, 2x 5150-5850 MHz, peak
gain < 5.02 dBi, omnidirectional
Bundled accessories specifications*
Power adapter Input: 0.5 A@100-240V VAC, Output: 52 VDC, 0.35A, 802.3af
* Order code dependant.

TAP200 access point must be used in compliance with any and all applicable national and
international laws and with any special restrictions regulating the utilization of the communication
module in prescribed applications and environments.
CE Declaration of Conformity
[BG] Bulgarian
С настоящото TELTONIKA NETWORKS декларира, че този TAP200 е в
съответствие със съществените изисквания и други разпоредби на
Директиви 2014/53/ЕU, 2011/65/ЕU, 2009/125/EC.
[HR] Croatian
Ovim TELTONIKA NETWORKS izjavljuje da je ovaj TAP200 u skladu s bitnim
zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU, 2011/65/EU,
2009/125/EC.
[CZ] Czech
Společnost TELTONIKA NETWORKS tímto prohlašuje, že tento TAP200 splňuje
základní požadavky a další ustanovení směrnic 2014/53/EU, 2011/65/EU,
2009/125/EC.
[DK] Danish
Undertegnede TELTONIKA NETWORKS erklærer herved, at følgende udstyr
TAP200 overholder de væsentlige krav og øvrige relevante krav i direktiv
2014/53/EU, 2011/65/EU, 2009/125/EC.
[NL] Dutch
Hereby, TELTONIKA NETWORKS declares that this TAP200 is in compliance
with the essential requirements and other relevant provisions of Richtlijnen
2014/53/EU, 2011/65/EU, 2009/125/EC.
[EE] Estonian
Käesolevaga kinnitab TELTONIKA NETWORKS seadme TAP200 vastavust
Direktiivide 2014/53/EU, 2011/65/EU, 2009/125/EC põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
[FI] Finish
TELTONIKA NETWORKS vakuuttaa täten että TAP200 tyyppinen laite on
Direktiivien 2014/53/EU, 2011/65/EU, 2009/125/EC oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
[FR] French
TELTONIKA NETWORKS déclare par la présente que ce TAP200 est conforme
aux exigences essentielles et autres dispositions des Directives 2014/53/EU,
2011/65/EU, 2009/125/EC.
[DE] German
TELTONIKA NETWORKS erklärt hiermit, dass dieses TAP200 den
grundlegenden Anforderungen und anderen Bestimmungen der Richtlinien
2014/53/EU, 2011/65/EU, 2009/125/EC entspricht.
[GR] Greek
Η TELTONIKA NETWORKS δηλώνει ότι το παρόν TAP200 συμμορφώνεται με τις
βασικές απαιτήσεις και άλλες διατάξεις των Οδηγιών 2014/53/ΕU, 2011/65/ΕU,
2009/125/EC.
[HU]
Hungarian
A TELTONIKA NETWORKS kijelenti, hogy ez a TAP200 megfelel a 2014/53/EU,
2011/65/EU, 2009/125/EC irányelvek alapvető követelményeinek és egyéb
rendelkezéseinek.
[IE] Irish
Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an TAP200 seo
bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU, 2011/65/EU,
2009/125/EC.
[IT] Italian
Con la presente, TELTONIKA NETWORKS dichiara che questo TAP200 è
conforme ai requisiti essenziali e ad altre disposizioni pertinenti della Direttive
2014/53/EU, 2011/65/EU, 2009/125/EC.
[LV] Latvian TELTONIKA NETWORKS ar šo paziņo, ka šis TAP200 atbilst pamatprasībām un
citiem Direktīvas 2014/53/EU, 2011/65/EU, 2009/125/EC noteikumiem.
[LT] Lithuanian
Šiuo dokumentu UAB TELTONIKA NETWORKS deklaruoja, kad šis TAP200
atitinka esminius reikalavimus ir kitas 2014/53/EU, 2011/65/EU, 2009/125/EC
Direktyvų nuostatas.

[MT] Maltese
TELTONIKA NETWORKS b'dan tiddikjara li dan TAP200 jikkonforma mar-
rekwiżiti essenzjali u dispożizzjonijiet oħra tad-Direttivi 2014/53/EU,
2011/65/EU, 2009/125/EC.
[NO]
Norwegian
TELTONIKA NETWORKS erklærer herved at denne TAP200 er i samsvar med de
grunnleggende kravene og andre bestemmelser i Direktivene 2014/53/EU,
2011/65/EU, 2009/125/EC.
[PL] Polish
TELTONIKA NETWORKS niniejszym oświadcza, że niniejszy TAP200 jest zgodny
z zasadniczymi wymaganiami i innymi postanowieniami Dyrektyw 2014/53/EU,
2011/65/EU, 2009/125/EC.
[PT]
Portuguese
A TELTONIKA NETWORKS declara que esta TAP200 cumpre os requisitos
essenciais e outras disposições das Directivas 2014/53/EU, 2011/65/EU,
2009/125/EC.
[RO] Romanian
TELTONIKA NETWORKS declară prin prezenta că acest TAP200 este în
conformitate cu cerințele esențiale și cu alte dispoziții ale Directivelor
2014/53/EU, 2011/65/EU, 2009/125/EC.
[SK] Slovak
Spoločnosť TELTONIKA NETWORKS týmto vyhlasuje, že tento TAP200 spĺňa
základné požiadavky a ďalšie ustanovenia smerníc 2014/53/EU, 2011/65/EU,
2009/125/EC.
[SI] Slovenian TELTONIKA NETWORKS izjavlja, da je ta TAP200 skladen z bistvenimi
zahtevami in drugimi določbami Direktiv 2014/53/EU, 2011/65/EU, 2009/125/EC.
[ES] Spanish
TELTONIKA NETWORKS declara por la presente que este TAP200 cumple los
requisitos esenciales y otras disposiciones de las Directivas 2014/53/EU,
2011/65/EU, 2009/125/EC.
[SE] Swedish
TELTONIKA NETWORKS förklarar härmed att denna TAP200 uppfyller de
grundläggande kraven och andra bestämmelser i Direktiven 2014/53/EU och
2011/65/EU, 2009/125/EC.
Detailed compliance information is available at the following internet address: wiki.teltonika-
networks.com/view/Certificates.
This sign means that is necessary to read the User's Manual before you start using the device.
This sign on the package means that all used electronic and electric equipment should not be
mixed with general household waste.
Hereby, TELTONIKA NETWORKS declares that this TAP200 is in compliance with the essential
requirements and other relevant provisions of Directives 2014/53/EU, 2011/65/EU, 2009/125/EC.
The full text of the EU Declaration of Conformity is available at the following internet address:
wiki.teltonika-networks.com/view/TAP200 _CE/RED
Hereby, TELTONIKA NETWORKS declares that this TAP200 is in compliance with Radio
Equipment Regulations 2017, The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012, The Ecodesign for Energy-Related Products
and Energy Information (Amendment) (EU Exit) Regulations 2019. The full text of the UK
Declaration of Conformity is available at the following internet address: wiki.teltonika-
networks.com/view/TAP200_UKCA
RF exposure

This device meets the official requirements for exposure to radio waves. This device is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by
authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s
body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could
result in your RF exposure exceeding the applicable limits.
External antennas used with TAP200 must be installed to provide a distance of at least 20 cm from
any people and must not be co-located or operated in conjunction with any other antenna or
transmitter.
Any external antenna gain must meet RF exposure and maximum radiated output power limits of the
applicable rule section.
Operating Frequency / Maximum transmission power
Wi-Fi 2.4 GHz 2412-2472 MHz, 20 dBm
Operating conditions
Operating temperature: -40° to +40° Celsius
Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry
environments.
Out of direct sunlight
Away from heat source, corrosive substances, salts, and flammable gases
Attention: operation outside the permissible range can considerably shorten the service life of the
device.
Faulty and damaged products
Do not attempt to disassemble the device or its accessories.
Only qualified personnel must service or repair the device or its accessories.
If your device or its accessories have been submerged in water punctured or subjected to a
severe fall, do not use until they have been checked at an authorized service center.
Electrical safety
Only use approved accessories.
Do not connect with incompatible products or accessories.
It is recommended to ground devices with grounding terminals before connecting them to
power. Failure to ground appropriately might result in a shock hazard. The cross-sectional
area of the protective grounding conductor should be at least 1mm2.
Product handling
You alone are responsible for how you use your device and any consequences related to its

use.
Use of your device is subject to safety measures designed to protect users and their
environment.
Always treat your device and its accessories with care and keep it in a clean and dust-free
place.
Do not expose your device or its accessories to open flames, lit tobacco products, liquid,
moisture, or high humidity.
Do not drop, throw or try to bend your device or its accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its
accessories.
Do not paint your device or its accessories.
Do not attempt to disassemble your device (exemptions for devices that require disassembly
for SIM insertion) or its accessories: it does not contain any user-serviceable parts. For safety
reasons, the equipment should be opened only by qualified personnel.
Make sure to use ESD personal protective equipment while the equipment is serviced.
Do not use your device in an enclosed environment where heat dissipation is poor.
Prolonged use in such space may cause excessive heat and raise ambient temperature, which
will lead to the automatic shutdown of your device or the disconnection of the mobile network
connection for your safety. To use your device again after such a shutdown, cool it in a well-
ventilated place before turning it on.
Please check all national laws and local regulations for the disposal of electronic products.
Do not operate the device where ventilation is restricted.
Do not use or install this product near water to avoid fire or shock hazards.
Avoid exposing the equipment to rain or damp areas.
Arrange power and Ethernet cables so that they are not likely to be stepped on or have items
placed on them.
Ensure that the voltage and the rated current of the power source match the device’s
requirements. Do not connect the device to an inappropriate power source.
During a thunderstorm, no operations should be carried out on the device and cables.
The unit must be powered off where blasting is in progress and explosive atmospheres are
present or near medical life support equipment.
Do not leave your device and its accessories within reach of small children or allow them to
play with it. They could hurt themselves or others and could accidentally damage the device.
Your device contains small parts with sharp edges that may cause an injury choking hazard.
Like any wireless device, this device operates using radio signals, which cannot guarantee
connection in all conditions. Therefore, you must never rely solely on any wireless device for
emergency communications or otherwise use the device in situations where the interruption of
data connectivity could lead to death, personal injury, property damage, data, or other loss.
The device may become warm during regular use.
Bottom view

AP Mounting Bracket Lock
https://wiki.teltonika-networks.com/view/File:TAP100_Locking_Mounting_Web_v1.mp4
TAP200 RJ45 Port
Video Quick Start Guide
Need some help setting up your new Teltonika Networks TAP10 Access Point? Watch our quick start
guide video and follow the step-by-step instructions to set up your new access point for operation
easily.
Installation Guide

Mounting instruction
1. Mount the AP Mounting Bracket using screws (not included).
Mounting holes are Ø 4.6 cm. You can find more in TAP200 Spatial
Measurements page.
2. Ensure the AP Mounting Bracket is secure and the Ethernet cable is ready.
3. Connect the LAN cable and orient the TAP200 RJ45 port at a
90-degree angle to the AP Mounting Bracket lock.
4. Turn the TAP200 counterclockwise to lock it onto the AP Mounting Bracket.
TAP200 Login to device
If you need to configure the TAP200 without an internet connection, please refer to the guide in this
section.

1. Ensure the
Wireless
network
connection is
Enabled. Go to
Start —
Control Panel
— Network
and Internet —
Network and
Sharing
Center. Click
on the
Change
adapter
settings in
the left panel,
then right-
click on
Wireless
Network
Adapter, and
select Enable.
2. Right-click
on Wireless
Network
Connection
and select
Properties.
Then select
Internet
Protocol
Version 4 and
click
Properties.
3. If not
selected,
check to Use
the following
IP address
and enter
192.168.1.5.
4. Click in the
Subnet mask
it should get
auto-filled
with
255.255.255.0.
Click OK.
5. Connect to
a wireless
network by
right-clicking
on Wireless
Network
Adapter and
selecting
Connect.

6. Choose the
wireless
network
TAP200 ****
from the list
and click
Connect.
Enter the WiFi
password
located on the
device's label.
7. To enter the
router's Web
interface
(WebUI), type
http://192.168.1.3
into the URL field
of your Internet
browser.
8. When
prompted for
authentication
enter the
username admin
and enter the
password located
on the device
information
label/engraving.