Telvue InfoVue Standard Player User manual

1
2Power Up
3Log In & Configure Networking
QSG_InfoVue_11_24_V4
To install the InfoVue Standard or Pro Player in a rack, use the ears to bolt the server
in place.
Install in a Rack
Power
Display Port (DP)
Display HDMI Out
Ethernet [0]
Ethernet [1]
Mouse
Keyboard
USB
DVI
Serial Ports (not used)
Capture Card (Pro-only)
HDMI Input
Monitor HDMI Out
(pass-through input)
(not used)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
1
2
3
45
678
10
9
Back Side of InfoVue Player
ii. Attach USB keyboard & mouse
1. Press Ctrl+Alt+Del to bring up the Windows login window.
2. Log off the existing login.
3. Log in as user “config” with password “config”.
iii. Assign static IP to eth0 - Management.
1. Double click the desktop icon “Network”:
a. Choose “Change adapter settings” (left side)
b. Double click on eth0 - Management.
c. Select Properties.
d. Choose Internet Protocol Version 4 (TCP/IPv4).
e. Click the properties button.
f. Choose “Use the following IP address” and fill in your network
specific values.
iv. Once IP configuration is completed, double click the Restart InfoVue Player icon on
the desktop to reboot the InfoVue Player.
v. Now you can access the Web UI from a web browser. Login to the InfoVue Web
User Interface at: http://(your IP address from previous step) with the default
Username: admin and Password: admin
Refer to the online user instructions on how to use the Web UI for other configuration and
encoder streaming settings. http://telvue.com/knowledgebase/infovue-pro-configuration-ui/
Turn the page for additional steps.
The following instructions are for launching a TelVue InfoVue system including configuring the
InfoVue Standard Player, InfoVue Pro Player (capture card models), and the InfoVue Stick Player.
!
Set up the InfoVue Standard or Pro Player
16000 Horizon Way
Suite 100
Mount Laurel, NJ 08054
800.885.8886
Email: [email protected]
Online Resources: www.telvue.com/infovue
Getting Started
TelVue®InfoVue™
There are two ways to configure networking:
a. WEB UI - requires ethernet cable, and an additional computer.
i. Assign IP address values to a network port on your computer:
1. IP 192.168.0.101
2. Net Mask: 255.255.255.0
ii. Connect ethernet cable between your computer and the eth1 port on InfoVue.
iii. Access the Web UI from a web browser, using the URL:
http://192.168.0.242.
(This is the factory-assigned IP address for the InfoVue Player.)
iv. Login with the default Username: admin and Password: admin
v. Set the IP Address and Configure Networking via the Config --> Network page.
b. DESKTOP CONSOLE - requires keyboard & mouse, and HDMI monitor.
i. Plug the InfoVue Player Display HDMI Output (#3) into a Monitor or TV.
Power up the InfoVue Player.
14
1312
4Configure InfoVue Pro for Encoding (IP Output)
Plug the InfoVue Pro Player Display HDMI Output (#3) into the HDMI Input (#12) with
provided HDMI cable. Set up encoding from the Web UI. Note this applies to
InfoVue Pro Players only, InfoVue Standard Players do not support Encoding.
12
14
Alternative Capture Card
11
11

Getting Started
TelVue®InfoVue™
12Install the InfoVue Stick
3
QSG_InfoVue_11_24_V4
a. Monitor with HDMI input (not included)
b. USB mouse and keyboard (not included)
c. USB hub (optional)
d. WiFi Network Access (wired network accpetable)
Requirements
16000 Horizon Way
Suite 100
Mount Laurel, NJ 08054
800.885.8886
Email: [email protected]
Online Resources: www.telvue.com/infovue
We share your vision™
The InfoVue Stick is a miniature InfoVue player with WiFi that can be used to display your InfoVue signage on a single HDMI TV or monitor. A USB Ethernet adapter
is available if WiFi cannot be used.
Set up the InfoVue Stick
Additional Resources
For more detailed instructions on using the InfoVue Digital Signage system, please refer to our
online knowledgebase at: http://telvue.com/kb/infovue/ to view the InfoVue User Manual,
Beginner’s Guide, and FAQs.
a. Connect USB keyboard and mouse to Stick. You should see the InfoVue
“Channel Loading” screen.
b. To recognize your WiFi:
i. Press Ctl+Alt+Del
ii. Choose Sign Out (Note: Click on the words “Sign Out”. Do not click the arrow, which
only cancels.) You’ll see a blank InfoVue screen.
iii. Hit any key to see the following three login options: config, infovue, teveadmin. Click
on the config icon on the left. Login using password: config.
iv. On the desktop double click the icon labeled ”WiFi”. A bar will slide out from the
right side of the screen displaying available wireless networks.
v. Click on your desired wireless network.
4Reboot the System
To get back to the InfoVue Player, Reboot the system.
• Double click on the Restart InfoVue Player icon on the desktop.
Creating Content (For All InfoVue Player Types)
Your InfoVue Player is now ready to receive content. To create content, login to the InfoVue management
interface (https://infovue.telvue.com) from any Internet connected computer with the login credentials that
were provided to you.
vi. Check “Connect
automatically” and
click “Connect”. It will
ask for a network
security key. Enter your
key and click Next.
When it asks if you
want to connect to
other devices, Click
“NO”.
vii. Now it should say “Connected” under your chosen network.
(If you want to delete a connection from the list, right-click on
the network name and and choose “forget this network”.)
Configure the InfoVue Stick
a. Connect Stick HDMI port to monitor. HDMI extension cable is provided if needed.
b. Connect power to Stick using provided power adapter plugged into the micro USB port on
the Stick.
TelVue InfoVue™
STICK
HDMI In
HDMI Out
Power
USB Mouse
(Plugs into an
HDMI monitor)
USB Keyboard