Tempo Fitness VT3 User manual

V1.03
Smart Fitness Watch
USER MANUAL
Please read the user manual carefully and keep it for
future reference.
10054
TUE 16
10
08
3102
105
North America
United Kingdom
France
España
:
:
:
:
[email protected]
[email protected]
[email protected]
[email protected]
Tempo
VT3
VIRMEE SUPPORT
@Virmee www.virmee.com @virmee_global

ENGLISH 01-25
FRANÇAIS 26-52
ESPAÑOL 53-79

VT3
Touch screen
Watch Band
User Manual
Charging Cable
01
WHAT'S INCLUDED
PRODUCT OVERVIEW
Power Button
Charging Pins
V1.03
Please read the user manual carefully and keep it for
future reference.
10054
TUE 16
10
08
3102
105
Smart Fitness Watch
USER MANUAL
VT3
Tempo
ENGLISH

USB Adapter
Power Bank
USB Port
1. Charge Your Watch
2. Wear Your Watch
1
GETTING STARTED
0302
To make the data tracking more accurate, we recommend that you wear the
watch with one finger's width below your wrist bone.
Please make sure the watch fits snugly against your skin and will not move
upward or downward during exercise.
Note:
If the Charging Cable can not magnetically attach on the Charging Pins of
the watch, please change the direction of it.

Functions of the Power Button
Power Button
Power On/Off
Pause the current exercise
0504
3. Change the Watch Bands（Optional） 4. Power On/Off
Step 1:
Turn over your watch, then press the quick-release
lever inward and gently pull the original watch band
away.
Long press the Power Button for 3-4 seconds to power on the watch, then select
your language. To power it off, long press the Power Button for 2-3 seconds and tap
Shutdown on the screen.
Step 2:
Get another band, slide the pin into the notch on
the watch, then press the quick-release lever inward
and slide the other end of the watch band into place.
Step 3:
Release the quick-release lever when the pins on
both ends are securely inserted into the notch.
Short Press
Long Press
End the exercise
(In Pool Swim and Open Water mode)
Screen on when the display is off
Return to the previous interface
Resume the exercise
(except Pool Swim and Open Water)
Switch the display interface

0706
Tap and Hold
5. Touch Navigation
Tap
Tap the screen to select or
confirm the option.
Swipe vertically or slide
horizontally to view
all the panels.
Tap and hold on the home
screen to start changing
the Watch Face.
Swipe/Slide 1. Function Overview on the Watch
Swipe up from the bottom of the home screen to switch the interfaces among
Calories, Stand, Steps and Reading.
Swipe left/right on the home screen to check the applications and 18
available exercises on your watch.
OPERATION B ASICS
5000/10000
06 12 18 23
Steps
10003.2km
Stand
14/12h
06 12 18 23
103 bpm
0 6 12 18
180
59
40
200
Pool Swin Open Water
Run Fast Walk 10054
TUE 16
10
08
3102
105
06 12 18 23
Calories
250/500

Track your sleep quality from
8:00PM to 9:00AM.
SpO2Stress
Test the amount of oxygen being
carried by red blood cells. A normal
reading is 90%-100%.
Follow the tips on the watch to
test your stress.
Display message when you receive a new
message with Bluetooth connected.
HR
Perform a heart rate test to monitor
your heart rate.
Heart Health
Test the health of your heart. Please check
the data monitored on the app.
Message
Scientific Sleep
08 09
Screen on and vibrate to notify you
if an alarm is set on the app.
Compass
Hold the watch horizontally to identify
the direction.
Tap to change the watch face, adjust the brightness, check the Bluetooth name,
the version of your watch and reset the watch.
Alarm
Measure the amount of time, and tap Lap
to track the number of laps when needed.
Stopwatch
Timer
Select a time interval or custom
new time interval(s), then count
down from that time interval.
Settings

1110
2. Operate via VIRMEE App
OperationAvailable Sports
Aerobics Basketball Badminton Soccer
Dance Yoga Rope-jump Sit-ups
TennisVolleyball Table
Tennis Ice-skating
Run Fast Walk Climb Cycle
Pool Swim Open Water
We'll update the user manual according to the latest app version of VIRMEE,
please visit www.virmee.com to get the latest instructions.

1312 1312
2
1
Notes:
If you have an Android phone, please permit the watch to access your
location, otherwise the watch may not be searched.
Please give full permissions to the watch to sync the information,
otherwise the app may fail to display all the available options.
The watch can only pair with one mobile phone at a time.
Search and download VIRMEE App from APP Store/Google Play or scan the
QR code directly.
Download and Install the App Pair the Watch with Your Mobile Phone
iOS 10.0 or later Android 5.0 or later Explore More
Step 1: Turn on your watch, slide left/right to select Settings, then tap About to
check the Bluetooth name of the watch.
Step 2: Enable Bluetooth on your mobile phone.
Step 3: Launch VIRMEE on your mobile phone and register an account.
Step 4: Follow the in-app instructions to create your profile.
Step 5: Tap Device>+> SEARCH AGAIN on your mobile phone, then tap
VIRMEE_ XXXX to connect.

Change Dial
Tap to custom and change your watch face.
Alarm
Tap to add/manage alarm clock(s).
Sedentary reminder
Tap to set a sedentary reminder when you sit for too long.
Smart reminder
Set to On to receive phone call/SMS notifications.
Easy camera
Enable it, then tap the watch to take a photo and save it to your device.
Tap Device on your mobile device to know more functions of your watch.
14 15
3Function Overview on the App
Sleep data monitored
1
Heart rate data monitored
2
Stress data monitored
3
Heart health data monitored
4
SpO2
5
Profile
Device
%
Healthy
Sports
No data today
No data today
No data today
Dis.(mile)
0.0
0%0
2020-05-15 64
The message push service is not running
12h
2020
0%0
0%0
Data
AM
10:08
248kcal
10000steps
Running
Running
0.0
Dis.(mile)
Blood Oxygen
Pressure Value
Today 14:00 98%
Sport

Time format
Switch time format between 12h and 24h.
Unit of measurement
Set measurement unit when exercising(Run, Fast Walk, and Pool Swim).
Date format
Switch date format between Month/Day and Day/Month.
Language switch
Change the language of your watch. Please tap Save on the top right corner if
the language is selected.
Vibration remind
Set vibration reminder and cycles for call, alarm, sedentary, and more.
16 17
Palming gesture
After enabling this function, the watch will screen on when you flip your wrist at
the set time period.
Bright screen time
Set a time period after which the watch will screen off.
Do not disturb
Select a time period during which the watch will mute sound and stop vibration.
Auto heart rate
After enabling this function, the watch will test your heart rate every 10 minutes.
Heart rate guidance
Set a remind zone for different categories, the watch will vibrate when your heart
rate data is below or above the value you set.

Wearing manner
If you wear your watch on your right/left wrist, please select Right/Left; wrong
selection will lead to wrong data.
Auto-recognition motion
After setting it to ON, the watch will automatically recognize the exercise you are
doing and enter into the sport interface accordingly.
Unbind
Tap to unbind the watch and stop sync data with your mobile device.
Firmware upgrade
Check the firmware version of your watch and update it when available
Before you update the firmware version, please make sure the battery level is
more than 50%.
Please do not exit the update interface to avoid update failure.
18 19
SPECIFICATIONS
Screen Size
Model VT3
Resolution
1.3 inch
240 x 240
Input Voltage
Input Current
BT Version
Working Temperature
DC 5V
< 0.3A
BT5.0
0-40°C/32-104°F

MAINTENANCE AND CARE
ORGANIC
VIRMEE
Soft Cleaner
Air Dry
20 21
FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

22 23
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and
compliance.
Le présent appareil est conforme
Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur
l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes.
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
ISEDC Warning
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Do not use other unauthorized chargers power supply for charging.
Do not use the product in environment below 0℃ or above 50℃ for charging.
The symbol indicates DC voltage
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means
that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled
to minimize its impact on the environment. User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or electronic equipment. This product can be used
across EU member states.
RECYCLING

24 25
Use the product in the environment with the temperature between 0℃ and 50℃; Otherwise, it may damage your
Smart Watch. It can be operated under 2000m.
For the following equipment:
Product Name: Smart Watch
Brand Name: VIRMEE
Model: VT3
Shenzhen VanTop Technology & Innovation Co., Ltd. hereby declares that this [Name: Smart Watch, Model: VT3] is in
compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at https://doc.vantop.com/.
Lithium ion Battery:
Model: 481525
Voltage: 3.8V
DongGuan Golden CEL Battery Co., Ltd.
Add: No.11, Yinhu Industrial Park, JiaoYiTang Management Zone, TangXia,
DongGuan, GuangDong, China
Bluetooth
Support Standard
Frequency Range
Max. RF Output Power
Type of Modulation
Data Rate
Quantity of Channels
802.15.1
2402-2480MHz
1.99dBm (EIRP)
GFSK
1Mbps
40

VT3
Écran Tactile
Bracelet de Poignet
Mode d'Emploi
Câble de Charge
CE QUI EST INCLUS
Schémas du Produit
Bouton Power
Pins de Recharge
V1.03
Please read the user manual carefully and keep it for
future reference.
10054
TUE 16
10
08
3102
105
Smart Fitness Watch
USER MANUAL
VT3
Tempo
FRANÇAIS
26

Adaptateur USB
Batterie Externe
Port USB
1. Rechargement de la Montre
2. Comment Porter la Montre
1
Pour Commencer
2827
Pour avoir des données plus précises, nous vous recommandons de le porter
en laissant d'un doigt entre l'os et le barcelet.
Assurez-vous que la montre se tient de manière serrée à votre peau et
qu'elle ne fasse pas le va-et-vient en haut en bas lors des activités
sportives.
Remarque :
Si le Câble de Recharge ne s'aimante pas aux Pins de Recharge de la
montre, veuillez essayez avec l'autre côté du connecteur.
Étape 1 : Branchez le connecteur USB du Câble de Recharge à un adaptateur
USB, batterie externe ou un port USB.
Étape 2 : Tenez l'autre extrémité du Câble de Recharge et rapprocher les Pins
de Recharge à l'arrière de la montre jusqu'à ce qu'ils s'aimantent
correctement.

3029
3. Changement du Bracelet de la Montre（Optionnel）
4. Power On/Off
Étape 1 :
Retournez la montre, puis pressez le clip de
fixation vers l'intérieur et retirez soigneusement le
bracelet d'origine.
Maintenez le Bouton Power pendant 3-4 secondes pour allumer la montre, puis
sélectionnez la langue. Pour l'éteindre, maintenez sur le Bouton Power 2-3
secondes et sélectionnez Éteindre sur l'écran.
Étape 2 :
Prenez le bracelet de rechange puis glissez la
goupille dans l'encoche de la montre, puis pressez
le clip de fixation vers l'intérieur et glissez
respectivement l'autre extrémité du bracelet.
Étape 3 :
Relâchez le clip de fixation une fois que les deux
goupilles sur chaque côté sont correctement
insérés.

3231
Fonctions du Bouton Power
Bouton Power
Bouton On/Off
Pause de l'activité actuelle
Appuyer
Maintenir/Appuyez
Longuement
Mettre en terme l'activité
(en mode Nage en piscine et
Eaux Ouvertes)
Allumer l'écran lorsque qu'il est éteint
Changer l'interface d'affichage
Retourner à l'interface précédente
Reprendre l'exercice (sauf mode
Nage en piscine et Eaux Ouvertes)
Maintenir longuement
5. Navigation Tactile
Appuyer
Appuyer sur l'écran pour
sélectionner ou confirmer
une option.
Défilez verticalement ou
horizontalement pour
accéder à tous les
panneaux.
Maintenez sur l'écran home
pour changer l'Apparence
de la Montre.
Défiler/Balayer

3433
1. Présentation des Fonctionalités de la Montre
Défilez vers le haut depuis le bas de l'écran d'accueil pour basculer entre les
interfaces Calories, Debout, Marche et lecture.
Défilez vers la gauche/droite sur l'écran d'accueil pour accéder aux ap
plications et les 18 exercices disponibles sur la montre.
E x p l o i t a t i o n s Basiques
5000/10000
06 12 18 23
Steps
10003.2km
Stand
14/12h
06 12 18 23
103 bpm
0 6 12 18
180
59
40
200
Pool Swin Open Water
Run Fast Walk 10054
TUE 16
10
08
3102
105
06 12 18 23
Calories
250/500
SpO2Stress
Test de la quantité d'oxygène
transportée par les globules rouges. La
lecture normale est de 90% à 100%.
Suivre les conseils de la montre
pour tester votre stress.
RC
Effectuer un test de fréquence
cardiaque pour surveiller votre
fréquence cardiaque.
Santé cardiaque
Tester la santé de votre cœur. Veuillez vérifier
les données du test sur l'application.