Tentworld TW-WATT150A-AA User manual
THE HIGH PRECISION WATT METER AND POWER ANALYZER, A SIMPLE
DEVICE THAT IS EASILY INSTALLED AND PROVIDES YOU WITH ALL THE KEY
RATINGS OF YOUR SOLAR PANELS IN REALTIME.
Warranty
The Tentworld Wattmeter is guaranteed to be free from manufacturer defects for
a period of 12 months. If during this time, we will repair or replace at Tentworlds
discretion.
How to apply for a Warranty Resolution.
with your proof of purchase and pictures of the product.
Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
www.tentworld.com.au
Tentworld Wattmeter 150A with
Anderson Plugs Manual
To monitor power being used from an appliance running from your battery:
1. Connect “Source” connection to your battery lead.
2. Connect “Load” connection to your appliance.
Display will light up and begin displaying power information.
Congratulations on the purchase of your new Tentworld Power Watt Meter. The
Power Watt meter is an invaluable tool for understanding your total camping pow-
er consumption & power generation.
Features of the Tentworld Power Watt Meter:
• Measures energy in (AH) Amp Hour, (W) Watts, (A) Amps & (V) Voltage.
• Reads voltage levels from 0 Volts.
• Accurate & Precise 0.01A and 0.01 Variance.
• Measures Peak Amps & Peak Watts
• Small & Light Form Factor makes it easy & convenient to install.
How to use:
To monitor power being generated by your solar panels:
1. Connect “Source” Connection to Solar Panel lead.
2. Connect “Load” Connection to Battery Lead.
Display will light up and begin displaying power information.
Watt Meter Display Information
Electrical Measurement Ranges
Miscellaneous Specications
Amps Average
Measured
Current Voltage
of Battery VM - Minimum Voltage
Ah - Total Amps Charge
Ap - Peak Amps
Data Scroll - When power is suppled to the watt meter the unit will start recording data. To reset
the Data Scroll to zero simply disconnect the watt meter from the power, wait 30 seconds and
reconnect.
CAUTION: Exceeding these limits may permanently damage the Watt Meter and may also cause personal injury or re.
Wp - Peak Watts
Wh - Total Watt Hours
Time
Watts Average
Measured
Data Scroll - Shows in sequence:
Parameter Range Notes
Current 0-50 A peak 50 A continuous
Voltage 4.8 V - 60 V -
Nominal Operating
Conditions
0°C - 50°C ambient air
temperature
non-condensing humidity
Maximum temperature
must be reduced
at maximum current rating
Parameter Value
Data Queue Sequence Time 2 Seconds
Operation Current 7 mA
Case Dimensions (LxWxD) 84mm x 50mm x 20mm
Weight 140g
Display Screen 16 Characters x 2 row STN LCD
Nominal Operating Conditions
0°C - 50°C ambient temperature, non-condensing
humidity. Maximum Temperature must be reduced at
maximum current rating
This manual suits for next models
1
