Hanna Instruments HI 22091 User manual

Instruction Manual
HI 2209 • HI 22091
Bench pH Meters
www.hannainst.comPrinted in ROMANIA MAN2209 07/14
Hanna Instruments Inc.
Highland Industrial Park
584 Park East Drive
Woonsocket, RI 02895 USA
Technical Support for Customers
Tel. [phone]
Fax [phone]
E-mail [email protected]
www.hannainst.com
Local Sales and Customer Service Office

Dear Customer,
Thank you for choosing a Hanna Instruments Product.
Please read this instruction manual carefully before using these
instruments. This manual will provide you with the necessary information
for the correct use of these instruments, as well as a precise idea of
their versatility.
If you need additional technical information, do not hesitate to e-mail
us at [email protected] or view our worldwide contact list at
www.hannainst.com.
WARRANTY ................................................................................. 2
PRELIMINARY EXAMINATION ....................................................... 3
GENERAL DESCRIPTION ............................................................... 3
FUNCTIONAL DESCRIPTION ......................................................... 4
SPECIFICATIONS.......................................................................... 5
OPERATIONAL GUIDE .................................................................. 6
pH CALIBRATION ........................................................................ 8
pH BUFFER TEMPERATURE DEPENDENCE..................................... 10
ELECTRODE CONDITIONING AND MAINTENANCE .......................... 11
TEMPERATURE CORRELATION FOR pH SENSITIVE GLASS ............ 14
ACCESSORIES ............................................................................ 15
ELECTRODE APPLICATION REFERENCE GUIDE ............................... 21
TABLE OF CONTENTS
HI 2209 and HI 22091 are guaranteed for two years against defects
in workmanship and materials when used for their intended purpose
and maintained according to instructions. Electrodes and probes are
guaranteed for six months. This warranty is limited to repair or
replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the problem. If the repair
is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization number from the Technical
Service department and then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packed for
complete protection.
WARRANTY
RECOMMENDATIONS FOR USERS
Before using these products, make sure that they are entirely suitable for
the environment in which they are used.
Operation of these instruments in residential area could cause
unacceptable interferences to radio and TV equipment, requiring the
operator to follow all necessary steps to correct interferences.
The glass bulb at the end of the pH electrode is sensitive to
electrostatic discharges. Avoid touching this glass bulb at all times.
During calibration, ESD wrist straps should be worn to avoid possible
damage to the electrode by electrostatic discharge.
To maintain the EMC performance of this equipment, the recommended
cables noted in the user's manual must be used. Any variation
introduced by the user to the supplied equipment may degrade the
instrument's EMC performance.
To avoid electrical shock, do not use these instruments when voltages at
the measurement surface exceed 24 Vac or 60 Vdc.
Toavoiddamageorburns,donotperformanymeasurementinmicrowave
ovens.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Hanna Instruments reserves the right to modify the design, construction
or appearance of its products without advance notice.

3
HI 2209 bench pH meter is designed for simplicity of use.
It features a large easy-to-read liquid crystal display (LCD)
and user friendly keyboard.
The pH calibration is made simple through the easy-to-operate
front panel knobs for offset and slope adjustment.
A front knob is provided for easy manual set for temperature
compensation of the pH reading.
HI 2209 can also measure ORP (Oxidation Reduction Potential)
in the mV range.
The range selection (pH, mV or °C for temperature compensation)
is made simple through the front membrane keyboard.
It is also available the model HI 22091 with recorder output
feature.
GENERAL DESCRIPTION
PRELIMINARY EXAMINATION
Remove the instrument from the packing material and examine
it carefully to make sure that no damage has occurred during
shipping. If there is any damage, notify your dealer.
Each meter is supplied complete with:
•HI 1332B plastic-body combination double-junction
refillable pH electrode with BNC connector and 1 m
(3.3') cable
•12 Vdc adapter
•Instruction manual.
Note:Save all packing material until you are sure that the
instrument functions correctly. All defective items must
be returned in the original packing with the supplied
accessories.
22
noitacilppA sedortcelE
eciujnomeL.12 B001CF
taeM.22 B1302IH,B002CF
fognilpmasetalporciM.32
Lm001nahtssel B3801IH
trugoYdnakliM.42 B012CF
stniaP.52 B3501IH
repaP.62 B3141IH
slacimehccihpargotohP.72 B0321IH
lortnocytilauQ.82 B2331IH
segasuaS.92 B1302IH,B002CF
stcudorpdilosimeS.03 B1302IH
nikS.13 B3141IH
selpmaslioS.23 B0321IH
stnevloS.33 B3401IH
dicagnortS.43 B3401IH
noitacilppanoisrembuS.53 B0311IH
stnemerusaemecafruS.63 B3141IH
loopgnimmiwS.73 ,B4112IH,B0311IH
B0192IH
tnatsnochtiwsnoitartiT.83
egnarerutarepmet B1311IH
ediwhtiwsnoitartiT.93
egnarerutarepmet B1311IH
ytidimuhhgihyreV.04 ,B2191IH,B119CF
B1191IH
ebuttsetdnaslaiV.14 B0331IH
gnissecorpeniW.24 B022CF

4
FUNCTIONAL DESCRIPTION
1) Liquid Crystal Display (LCD)
2) Temperature setting knob
3) °C range selection key
4) mV range selection key
5) pH range selection key
6) pH offset adjustment knob
7) pH slope adjustment knob
8) Sample holders
9) Analog output connectors (HI 22091 only)
10) BNC electrode connector
11) Reference electrode socket
12) Power adapter socket
13) ON/OFF switch
Front Panel
Rear Panel
21
ELECTRODE APPLICATION
REFERENCE GUIDE
noitacilppA sedortcelE
muirauqA.1 B1191IH,B2331IH
retaw-htaB.2 B0311IH,B0191IH
reeB.3 B1311IH
daerB.4 B002CF,B1302IH
eseehC.5 B002CF
stcudorpyriaD.6 B001CF,B119CF
retawytriD.7 B2191IH,B0191IH
snoislumE.8 B3501IH
tnemnorivnE.9 B0321IH
sksalF.01 B1331IH
esularenegyrtsudnidooF.11 B001CF,B119CF
tiurF.21 B022CF,B002CF
cinagro,seciujtiurF.31 B012CF
noitulosetsawgnizinavlaG.41 B2191IH,B0311IH
snoitacilppaytud-yvaeH.51 B5311IH
retawytiruphgiH.61 B3501IH
erutlucitroH.71 B002CF,B3501IH
snoitacilppaenil-nI.81 ,B5311IH,B4311IH
B0192IH,B4112IH
esularenegyrotarobaL.91 ,B0321IH,B1311IH
B0331IH,B2331IH
rehtaeL.02 B3141IH

5
SPECIFICATIONS
EGNAR Hp00.41ot00.0
Vm9991±
NOITULOSER Hp10.0
Vm1
C°52@YCARUCCA Hp10.0±
Vm1±
noitarbilaCHp sbonkhguorht,tniop2,launaM
noitasnepmoCerutarepmeT C°001ot0morflaunaM
)F°212ot23(
edortcelEHp
)dedulcni(
B2331IH elbuod,ydobcitsalp
m1dnaCNBhtiw,elballifer,noitcnuj
elbac)'3.3(
tuptuOgolanA
(19022IH )ylno
V5ot0
Vm9991+ot9991-/Hp41ot0
0syawla:erutarepmeT
ecnadepmItupnI 01
21
smho
ylppuSrewoP )dedulcni(retpadacdV21
tnemnorivnE )F°221ot23(C°05ot0
gnisnednoc-nonHR%59.xam
snoisnemiD mm901x222x532
)”3.4x7.8x2.9(
thgieW )sbl9.2(gK3.1
20
EXTENSION CABLES FOR SCREW-TYPE ELECTRODES
(SCREW TO BNC ADAPTER)
HI 7855/1 Extension cable 1m (3.3') long
HI 7855/3 Extension cable 3m (9.9') long
HI 7855/5 Extension cable 5m (16.5') long
HI 7855/10 Extension cable 10m (33') long
HI 7855/15 Extension cable 15m (49.5') long
OTHER ACCESSORIES
HI 710005 Voltage adapter from 115 Vac to 12 Vdc
HI 710006 Voltage adapter from 230 Vac to 12 Vdc
ChecktempC Pocket-size thermometer (range -50.0 to 150.0°C)
HI 76405 Electrode holder
HI 8427 pH and ORP electrode simulator with 1 m (3.3')
coaxial cable ending in female BNC connectors
HI 931001 pH and ORP electrode simulator with LCD and 1 m
(3.3') coaxial cable ending in female BNC connectors
CONNECT TO
SCREW TYPE
ELECTRODES
CONNECT TO THE
BNC SOCKET
OF THE METER
HI 7855 SERIES CABLE CONNECTORS
CONNECTOR AND 3.0 mm (0.12") CABLE WITH BNC

6
4 cm
(1½")
POWER CONNECTION
Plug the supplied 12 Vdc adapter into the power supply socket
(#12 on page 4).
Note: Make sure the mains line is protected by a fuse.
ELECTRODE CONNECTION
For combination pH or ORP electrodes (with internal reference)
connect the electrode's BNC to the socket provided (#10 on
page 4).
For an electrode with a separate reference, connect the measuring
electrode's BNC to the BNC socket (#10 on page 4) and the
reference electrode's jack to the socket provided (#11 on
page 4).
Note: To prevent damage to the electrode, remove the pH
electrode from the solution before turning the meter off.
If the meter is OFF, detach the electrode from the meter
before immersing the electrode in the storage solution.
TAKING pH MEASUREMENTS
Make sure that the instrument has been calibrated for pH
before taking pH measurements.
•Put the beakers (bottles 50 or 100 mL) with the
solutions under test on the sample holders.
•Switch the instrument on by pressing the ON/OFF
switch.
•Press the pH key to display the pH measurement.
•Immerse the electrode tip (4 cm / 1½") into the
sample and shake briefly.
•Take the temperature of the solution with a
ChecktempC or a glass thermometer (e.g.25°C).
•Press and hold the Temp key to display temperature
setting on the LCD and adjust the temperature
knob to display the temperature of the sample.
OPERATIONAL GUIDE
19
HI 1413B
Glass-body, single junction, flat tip, Viscolene, non-refillable, combination
pH electrode. Use: surface measurement.
ORP ELECTRODES
HI 3131B
Glass-body, refillable, combination platinum ORP electrode.
Use: titration.
HI 3230B
Plastic-body (PES), gel-filled, combination platinum ORP electrode.
Use: general purpose.
HI 4430B
Plastic-body (PES), gel-filled, combination gold ORP electrode. Use:
general purpose.
110 mm
4.3"
12 mm
0.5"
HI 1413
150 mm
5.9"
12 mm
0.5"
"S" VERSION
HI 3131
120 mm
4.7"
12 mm
0.5"
HI 3230
"S" VERSION
120 mm
4.7"
12 mm
0.5"
HI 4430
"S" VERSION

7
•Release Temp key. The meter returns to pH range.
•The display shows the pH value of the test solution
compensated for temperature.
If measurements are taken in different samples successively, it
is recommended that the electrode be rinsed thoroughly for
better conditioning and to eliminate cross-contamination of
the sample.
For the rinsing process, it is recommended to use a liberal
amount of the next solution to be measured.
TAKING ORP MEASUREMENTS
HI 2209 and HI 22091 have the capability to take ORP
measurements, using an ORP electrode. Hanna Instruments
offers a variety of ORP electrodes for this purpose (see
accessories). Contact your Dealer for more information.
•Connect the ORP electrode to the meter and
submerge the tip (4 cm / 1½") into the
sample to be tested.
Note:ORP measurements are taken without temperature
compensation.
•Press the mV key to enter the mV mode. Allow
a few minutes for the reading to stabilize.
•The display will indicate the mV value (positive or negative).
AFTER MEASUREMENTS
•Press the ON/OFF switch to switch the instrument off.
4 cm
(1½")
18
FC 100B
Plastic-body (PVDF), double junction, refillable, combination pH electrode.
Use: general purpose for food industry.
FC 200B
Plastic-body (PVDF), open junction, conic, Viscolene, non-refillable,
combination pH electrode. Use: meat & cheese.
FC 210B
Glass-body, double junction, conic, Viscolene, non-refillable, combina-
tion pH electrode. Use: milk, yogurt.
FC 220B
Glass-body, triple-ceramic, single junction, refillable, combination pH
electrode. Use: food processing.
FC 911B
Plastic-body (PVDF), double junction, refillable with built-in amplifier,
combination pH electrode. Use: very high humidity.
120 mm
4.7"
12 mm
0.5"
FC 100
75 mm
2.95"
6 mm
0.25"
FC 200
120 mm
4.7"
12 mm
0.5"
FC 210
120 mm
4.7"
12 mm
0.5"
9.5mm DIA
0.37"
FC 220
110 mm
4.3"
12 mm
0.5"
FC 911

8
HI 7004 HI 7007
HI 7004
IMPORTANT
The instrument's pH range should be re-calibrated:
•When the meter is new.
•Whenever the pH electrode is replaced.
•At least once a month.
•After use in aggressive chemicals.
•After cleaning procedure and changing the reference electrolyte.
•For greatest accuracy.
PREPARATION
Pour small quantities (up to 4 cm / 1½"
level) of pH 7.01 (HI 7007) and pH
4.01 (HI 7004) or pH 10.01 (HI 7010)
solution into clean beakers (or 100 mL
bottles). If possible use plastic beakers to minimize any EMC
interferences.
If you are measuring in the acid range, use pH 4.01 as second
buffer; if you are measuring in
the alkaline range, use pH 10.01
as second buffer.
For accurate calibration, use two
beakers for each buffer solution; the first for rinsing the
electrode, the second for calibration. In this way, contamination
of the buffer is minimized.
Note: The electrode should be submerged approximately 4 cm
(1½") into the solution.
Note: If you need to calibrate to NBS standards, use pH 6.86
(HI 7006) and pH 9.18 (HI 7009) instead of pH 7.01
and 10.01 respectively.
Use a ChecktempC or a glass thermometer as reference.
Put the beakers with the calibrations solutions on the beaker
holders on the top of the instrument.
PROCEDURE
•Switch the instrument on by pressing the
ON/OFF switch.
pH CALIBRATION
HI 7007
RINSE
HI 7007
CALIBRATION
17
HI 1330B
Glass-body, semimicro, single junction, refillable, combination pH
electrode. Use: laboratory, vials.
HI 1331B
Glass-body, semimicro, single junction, refillable, combination pH
electrode. Use: flasks.
HI 1230B
Plastic-body (Ultem®), double junction, gel-filled, combination pH
electrode. Use: general, field.
HI 2031B
Glass-body, semimicro, conic, refillable, combination pH electrode. Use:
semisolid products.
HI 1332B
Plastic-body (Ultem®), double junction, refillable, combination pH
electrode. Use: general purpose.
120 mm
4.7"
5mm
0.2"
5mm DIA
0.2"
"S" VERSION
HI 1330
120 mm
4.7"
12 mm
0.5"
"S" VERSION
HI 1230
75 mm
2.95"
6 mm
0.25"
"S" VERSION
HI 2031
120 mm
4.7"
12 mm
0.5"
"S" VERSION
HI 1332
210 mm
8.25"
8 mm
0.3" 7.5mm DIA
0.29"
"S" VERSION
HI 1331

9
4 cm
(1½")
•Rinse and immerse the pH electrode into pH
7.01 buffer and shake briefly. Wait for the
reading to stabilize.
•Note the temperature of the buffer solution
using a ChecktempC or a glass thermometer
(e.g. 20°C).
•Press and hold the Temp key to select
temperature setting.
•Adjust the Temperature knob until the LCD shows the
noted temperature.
•Release the Temp key. The instruments returns to pH
range.
•Wait a couple of minutes and adjust the Offset knob until
display shows the pH value at the noted temperature (see
the pH versus temperature chart).
•Rinse and immerse the pH electrode in pH 4.01 /pH 10.01
buffer and shake briefly.
•Wait a couple of minutes and adjust the Slope knob until
display shows the pH value at the noted temperature (see
the pH versus temperature chart).
•The pH calibration is now complete.
16
ORP PRETREATMENT SOLUTIONS
HI 7091L Reducing pretreatment solution, 500 mL
HI 7092L Oxidizing pretreatment solution, 500 mL
pH ELECTRODES
All electrodes part numbers ending in B are supplied with a BNC
connector and 1 m (3.3') cable.
HI 1043B
Glass-body, double junction, refillable, combination pH electrode. Use:
strong acid/alkali.
HI 1053B
Glass-body, triple ceramic, conic shape, refillable, combination pH
electrode. Use: emulsions.
HI 1083B
Glass-body, micro, Viscolene, non-refillable, combination pH electrode.
Use: biotechnology, micro titration.
HI 1131B
Glass-body, double junction, refillable, combination pH electrode.
Use: general purpose.
120 mm
4.7"
12 mm
0.5"
9.5mm DIA
0.37"
"S" VERSION
HI 1043
120 mm
4.7"
12 mm
0.5"
"S" VERSION
HI 1053
120 mm
4.7"
12 mm
0.5" 5 mm
0.2" 3 mm
0.12" 3.0 mm DIA
0.12"
HI 1083
120 mm
4.7"
12 mm
0.5"
9.5mm DIA
0.37"
"S" VERSION
HI 1131

10
pH BUFFER TEMPERATURE DEPENDENCE
Temperature has an effect on pH. The calibration buffer
solutions are affected by temperature changes to a lesser
degree than normal solutions.
For manual temperature calibration please refer to the following chart.
For instance, if the buffer temperature is 25°C, the display
should show pH 4.01, 7.01 or 10.01 at pH 4, 7 or 10
buffers, respectively.
At 20°C, the display should show pH 4.00, 7.03 or 10.06.
The meter reading at 50°C will then be 4.06, 6.98 or 9.82.
PMET SREFFUBHp
Cº Fº 10.4 68.6 10.7 81.9 10.01
0 23 10.4 89.6 31.7 64.9 23.01
5 14 00.4 59.6 01.7 93.9 42.01
01 05 00.4 29.6 70.7 33.9 81.01
51 95 00.4 09.6 50.7 72.9 21.01
02 86 00.4 88.6 30.7 22.9 60.01
52 77 10.4 68.6 10.7 81.9 10.01
03 68 20.4 58.6 00.7 41.9 69.9
53 59 30.4 48.6 99.6 11.9 29.9
04 401 40.4 48.6 89.6 70.9 88.9
54 311 50.4 38.6 89.6 40.9 58.9
05 221 60.4 38.6 89.6 10.9 28.9
55 131 80.4 48.6 89.6 99.8 97.9
06 041 90.4 48.6 89.6 79.8 77.9
56 941 11.4 48.6 99.6 59.8 67.9
07 851 21.4 58.6 99.6 39.8 57.9
57 761 41.4 68.6 00.7 19.8 47.9
08 671 61.4 78.6 10.7 98.8 47.9
58 581 71.4 78.6 20.7 78.8 47.9
09 491 91.4 88.6 30.7 58.8 57.9
59 302 02.4 98.6 40.7 38.8 67.9
15
ACCESSORIES
pH CALIBRATION SOLUTIONS
HI 70004P pH 4.01 buffer solution, 20 mL sachet, 25 pcs
HI 70007P pH 7.01 buffer solution, 20 mL sachet, 25 pcs
HI 70010P pH 10.01 buffer solution, 20 mL sachet, 25 pcs
HI 7004L pH 4.01 buffer solution, 500 mL
HI 7006L pH 6.86 buffer solution, 500 mL
HI 7007L pH 7.01 buffer solution, 500 mL
HI 7009L pH 9.18 buffer solution, 500 mL
HI 7010L pH 10.01 buffer solution, 500 mL
HI 8004L pH 4.01 buffer solution in FDA bottle, 500 mL
HI 8006L pH 6.86 buffer solution in FDA bottle, 500 mL
HI 8007L pH 7.01 buffer solution in FDA bottle, 500 mL
HI 8009L pH 9.18 buffer solution in FDA bottle, 500 mL
HI 8010L pH 10.01 buffer solution in FDA bottle,500 mL
ELECTRODE STORAGE SOLUTION
HI 70300L Storage solution, 500 mL
HI 80300L Storage solution in FDA bottle,500 mL
ELECTRODE CLEANING SOLUTIONS
HI 70000P Electrode rinsing solution, 20 mL sachet, 25 pcs
HI 7061L General cleaning solution, 500 mL
HI 7073L Protein cleaning solution, 500 mL
HI 7074L Inorganic cleaning solution, 500 mL
HI 7077L Oil & Fat cleaning solution, 500 mL
HI 8061L General cleaning solution in FDA bottle,500 mL
HI 8073L Protein cleaning solution in FDA bottle,500 mL
HI 8077L Oil & Fat Cleaning solution in FDA bottle,500 mL
ELECTROLYTE SOLUTIONS
HI 7071 3.5M KCl + AgCl electrolyte solution, 4 x 30 mL, for
single junction electrodes
HI 7072 1M KNO3electrolyte solution, 4 x 30 mL
HI 7082 3.5M KCl electrolyte solution, 4 x 30 mL, for double
junction electrodes
HI 8071 3.5M KCl + AgCl electrolyte solution in FDA bottle, 4 x
30 mL, for single junction electrodes
HI 8072 1M KNO3electrolyte solution in FDA bottle, 4 x 30 mL
HI 8082 3.5M KCl electrolyte solution in FDA bottle, 4 x 30 mL,
for double junction electrodes