TERK Technologies FM+ User manual

Helpful Information
About Your FM+ Antenna
Limited Warranty
Your FM+ antenna is a quality indoor FM antenna which uses Gamma
Loop™ technology to receive FM broadcasts with the least amount of
noise possible. While no antenna can receive what isn't there, when
a usable radio signal is present, your FM+ will improve FM reception.
Note: Generally, a practical limit to FM reception is 30-40 miles from
the transmitter depending on terrain.
Audiovox Corporation (Audiovox) warrants this product against defects in materials or
workmanship for one (1) year from the date of purchase. During this period, this
product will be replaced without charge. This warranty does not cover any damage
due to acts of nature, commercial use, accident, misuse, abuse or negligence. This
warranty is only valid in the USA. Replacement as provided under this warranty is the
exclusive remedy of the consumer. Audiovox shall not be liable for any incidental or
consequential damages for breach of any express or implied warranty on this product,
except to the extent that limitations of this sort are prohibited by applicable law.
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURCHASE EXCEPT TO THE EXTENT THAT IMPLIED WARRANTIES OR
EITHER SORT ARE REQUIRED BY APPLICABLE LAW, AND IN SUCH CASE, EACH
WARRANTY IS LIMITED IN DURATION TO THE ONE YEAR.
FM+
FM Indoor Antenna
FM+
OWNER’S MANUAL
TERK and the TERK logo are registered trademarks of AUDIOVOX Corp. 68P003A
For customer service and
technical information::1.800.290.6650
For Customer Service
Visit Our Website At
www.audiovox.com
Product Information, Photos,
FAQ’s,Owner’s Manuals
For customer service and
technical information::
1.800.290.6650

Locating Your FM+
For Best Results
1. All antennas are affected by electromagnetic fields.
To maximize performance, position your FM+
antenna away from direct contact with receivers,
tuners, CD players, TVs and computers.
Note: Antennas work best when CD players, VCRs
and computers are turned off.
2. Keep the antenna away from large metal objects.
Placing the FM+ near a window often provides
the best results.
3. On occasions, certain areas in your home may be null
points or dead spots where no radio signal can be
received. This may also occur in metal-frame buildings
and houses with aluminum siding. In this case, simply
move your antenna, trying different locations, until the
best reception is achieved.
4. In weak signal areas, optimun tuning is achieved with
your receiver's scan button in the off position.
FM+
2
Making Connections
With Your New FM+ Antenna
Radio tuners and receivers can have different
connections for your new FM+ antenna. Please find
the connection that best matches your tuner or
receiver and follow the listed instructions.
FM Connections:
75 Ohm Coaxial:
Your TERK antenna has a Slip-On Coaxial connector
on the FM lead. Simply slide the connector onto the
coaxial terminal. See Fig. 1.
75 Ohm Push-Button Connection:
If your Radio tuner or receiver has Push-Button
terminals for FM you will need to use the supplied
RED 75 Ohm matching transformer. First slide the
RED 75 Ohm matching transformer into the connector
on the FM lead of the antenna. Next slide the Red wire
into the terminal marked “FM 75 Ohm”. Lastly
connect the BLACK wire into the terminal marked
“FM Ground” or “GND”. See Fig. 2.
FM+
1Fig. 1 Fig. 2