TERK Technologies BMS-34 Instruction manual

Specs::
HDTV Ready
Insertion loss: 
Ant: 10dB typical
Sat: 2dB typical
Frequency range: 54-2150MHz
Isolation: 25 to 35dB typical
Limited Warranty
TERK Technologies Corp. (TERK)
warrants this product against defects in
materials or workmanship for one (1)
year from the date of purchase. During
this warranty period, this product will be
replaced without charge. This warranty
does not cover any damage due to acts 
of nature, commercial use, accident,
misuse, abuse or negligence. This
warranty is only valid in the USA.
Replacement as provided under this
warranty is the exclusive remedy of the
consumer. TERK shall not be liable for
any incidental or consequential damages
for breach of any express or implied
warranty on this product, except to the
extent that limitations of this sort are
prohibited by applicable law. THERE ARE
NO IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURCHASE EXCEPT TO THE
EXTENT THAT IMPLIED WARRANTIES OF
EITHER SORT ARE REQUIRED BY
APPLICABLE LAW, AND IN SUCH CASE,
EACH WARRANTY IS LIMITED IN
DURATION TO ONE YEAR.
TERK and TERK Technologies 
are trademarks of 
TERK Technologies Corp. Commack, NY
©2003 TERK Technologies Corp.
TiVo is a registered trademark of TiVo Inc.

Made in China
For additional information: Call
1.800.942.TERK (8375) or Visit
www.terk.com

10P016
TO TV SAT IN
ANT IN
Sat.
13V Sat. 18V
Ant./
CATV
Satellite Receiver
Sat.
DC-
Block
Ant./CATV
BDS-P1
To Additional Receivers
Note: DC block should 
not be used with 
powered antennas
BMS-34
grounding
screw Ant./
CATV
Combi.
• Supplies signal for up to
4 satellite connections
• Compatible with dual 
output LNB systems
•Die-cast aluminum 
construction and weather-
proof F-connectors
• Easy to install
loc.
1
loc.
2
loc.
3
loc.
4
TO TV
Additional diplexer 
(not included) 
needed at each 
receiver location
to separate signals 
back out.