TERK Technologies VR5210 User manual

VR-1
TV Volume Regulator
VR-1
Owner’s Manual
T0157-VR1-OM.qxp 5/29/03 03:24 PM Page C1

About Your TV Volume Regulator
The VR-1 provides effective volume matching for television
audio, DVDs, movies and more. With the VR-1, you will enjoy
consistent audio levels when surfing from channel-to-
channel, program-to-commercial, or etween loud and
noisy scenes of a movie.
WARNING - DO NOT CONNECT T E OUTPUT OF ANY
AMPLIFIER TO T E INPUT OF T E TV VOLUME
REGULATOR. PERMANENT DAMAGE WILL OCCUR.
The VR-1 can handle up to 4.6 volts Peak-to-Peak on
the input.
VR-1
1
T0157-VR1-OM.qxp 5/29/03 03:24 PM Page C2

Connecting Your VR-1;
Basic Setup
1. Use a set of red and white audio connection ca les to
connect the output of your source device (such as a
ca le ox, satellite receiver, DVD player, VCR, etc.)
to the INPUT of the VR-1.
2. Use another set of red and white connection ca les
(not included) to connect the OUTPUT of the VR-1 to
the input of your TV or another signal control device
(such as a stereo, home theater receiver, powered
speakers, etc.).
3. Connect the A/C adapter to the DC input of the VR-1.
4. Plug the A/C adapter into a working electrical outlet.
VR-1
2
Cable Box,
Satellite, DVD,
VCR, Game IN OUT
R R
VIDEO OUT
RIGHTLEFT
AUDIO
IN
RIGHTLEFT
VIDEO
IN
AUDIO OUT
T0157-VR1-OM.qxp 5/29/03 03:25 PM Page C3

Connecting the VR-1;
Tape Monitor Setup
1. Use a set of red and white audio connection ca les to
connect the Tape Out of your stereo or home theater
receiver to the INPUT of the VR-1.
2. Use another set of red and white connection ca les (not
included) to connect the OUTPUT of the VR-1 to the Tape
Monitor input of your stereo or home theater receiver.
3. Connect the A/C adapter to the DC input of the VR-1.
4. Plug the A/C adapter into a working electrical outlet.
Note: You may need to ena le the Tape Monitor feature
on your stereo or home theater receiver. Please check
the owner’s manual of your system to determine how
to do this.
VR-1
3
Stereo/
Receiver
Tape IN Tape OUT
RIGHTLEFT
IN OUT
R R
T0157-VR1-OM.qxp 5/29/03 03:25 PM Page C4

Connecting the VR-1 from the
Audio Outputs of Your TV
1. Use a set of red and white audio connection ca les
to connect the audio output of your TV to the INPUT
of the VR-1.
2. Use another set of red and white connection ca les
(not included) to connect the OUTPUT of the VR-1 to
the input of your stereo or home theater receiver.
3. Connect the A/C adapter to the DC input of the VR-1.
4. Plug the A/C adapter into a working electrical outlet.
Note: You may need to ena le the audio output feature of
your TV. Please check the owner’s manual of your system to
determine how to do this.
VR-1
4
AUDIO
OUT
RIGHTLEFT
Stereo
/
Receiver
AUDIO
IN
LEFT
SPEAKER RIGHT SPEAKER
RIGHT
RIGHT
LEFT
LEFT
IN OUT
R R
T0157-VR1-OM.qxp 5/29/03 03:25 PM Page C5

Limited Warranty
TERK is a registered trademark. The TERK logo is a trademark of the TERK Technologies Corp.
For more information, visit www.terk.com. or,
for technical support, call 1.800.942.TERK (8375). 102P005A
TERK Technologies Corp. (TERK) warrants this product against defects
in materials or workmanship for 1 year from the date of purchase.
During this warranty period, this product will e replaced without charge.
This warranty does not cover any damage due to acts of nature, commercial
use, accident, misuse, a use or negligence. This warranty is only valid in the
USA. Replacement as provided under this warranty is the exclusive remedy
of the consumer. TERK shall not e lia le for any incidental or consequential
damages for reach of any expressed or implied warranty on this product,
except to the extent prohi ited y applica le law. Any implied warranty or
merchanta ility or fitness, for a particular purchase on this product, is
limited to the duration of this warranty.
T0157-VR1-OM.qxp 5/29/03 03:25 PM Page C4