TERK Technologies BMS-34 User manual

BMS-34
Expand Your Satellite
TV System
TERK's multiswitch features
a high quality, ultra-low
noise built-in amplifier to
eliminate signal loss, to
deliver the best possible
satellite TV reception to
every TV in the home. It also
includes 13 volt and 18 volt
LNB port connections, and
features DC Pass capability
allowing it to be used with
amplified antennas that
require DC power via coax
cable connection.
TERK's multiswitch enables
users to connect up to four
satellite TV receivers to a
dual LNB satellite dish plus
an off-air antenna or cable
TV hookup. With a TERK
multiswitch, different satellite
TV channels can be viewed
independently on up to four
TVs throughout the home,
along with off-air broadcast
or cable TV viewing-greatly
expanding the functionality
of a satellite TV system.

TERK TECHNOLOGIES CORPORATION 63 MALL DRIVE, COMMACK, NY 11725 TEL: [phone] FAX: [phone] www.terk.com
©2000 TERK TECHNOLOGIES CORP. TK1072-12/00.
MULTISWITCH
MODEL: BMS-34
Technical Information:
BMS-34
Frequency Range: 54-2150MHz
Impedance: 75ohm matching
Insertion Loss: Ant -9dB Typ
Sat +4dB Typ
Isolation: Ant 30dB Typ
Sat 30dB Typ
Watch Up To Four Programs At The Same Time
The TERK BMS-34 connects to a dual-LNB satellite dish,
plus an off-air antenna or cable TV hookup, and routes their
combined signals to four outputs. Those outputs can then
be split using a TERK diplexer, to feed four separate satellite
receivers plus four TV antenna inputs.
The BMS-34 is designed for maximum signal transfer and
correct 75 ohm impedance across all bands, to deliver the
best possible reception.
At TERK Technologies we strive to offer the highest quality products to our consumers.
The specifications are subject to change without notice.