TerraTec GRABSTER AV 150 MX User manual

TerraTec Grabster AV 150
22.12.2005 – Page 1 – Might change without notice.
All trademarks are registered property of their respective
owners. © TerraTec Electronic GmbH
Burn your VHS tapes to DVD
Good and easy: With the Grabster AV 150, you can turn your old VHS tapes into top-quality
digital films with just a few clicks of the mouse, and then archive them to CD or DVD using the full
version of Ulead MovieFactory 3 included in the package.
Easy to connect
Connecting the Grabster AV 150 is dead easy. Just plug it into a USB 2.0 port on your computer
or laptop, connect the audio cable, install the software – you're done. Now connect the video
cassette recorder to the Grabster AV 150, and nothing more stands in the way of backing up
your valuable movie memories and collections of shows. You can connect other devices, like a
camcorder, satellite receiver or DVD player, for a vast variety of uses and applications...
Burning finished recordings
The recordings are saved on the computer automatically. With the software provided, you can
cut out the commercials or cut your own clips. Would you rather watch the finished films in the
living room or at a friend's house? Not a problem: Simply burn your videos to CD or DVD. You
can duplicate these infinitely…
Grabster AV 150. The most affordable and easiest way to beam your VHS tapes into the future
of digital!

TerraTec Grabster AV 150
22.12.2005 – Page 2 – Might change without notice.
All trademarks are registered property of their respective
owners. © TerraTec Electronic GmbH
Technical details
Features
•PC interface: USB 2.0
•Video standards: PAL & NTSC
•Analogue signal inputs: Composite (RCA)
and S-Video
•Video through function
•Capture rate PAL: up to 720x576 pixel/25 fps
•Capture rate NTSC: up to 720x480 pixel/29,9
fps
•Frame size: 160x120 to 720x576 pixel
•Software interface: Windows WDM driver
•Data formats: I420, YUY2, RGB24
•Power 5 V, provided by USB port
Scope of delivery
•Grabster AV 150
•USB 2.0 cable
•RCA stereo to mini-jack cable
•Software and driver CD
•Software manual on CD
•Hardware manual on CD
•Service card
•Registration card
Art.No.: 10270
EAN code: 4017273102702
Warranty: 24 months
System requirements
•Intel® Pentium® III 800 MHz or AMD
Athlon® 800 MHz (MPEG1/VCD)
•Intel® Pentium® IV 1400 MHz or AMD
Athlon® 1800+ (MPEG2/DVD)
•Microsoft® Windows® XP
•256 MB RAM
(512 MB or more recommended)
•USB 2.0 interface
•Sound card with line-in
•400 MB of available hard drive space for
program installation
•Windows® compatible display with at least
800x600 resolution (1024x768
recommended)
•Windows® compatible DVD-R/RW,
DVD+R/RW, DVD-RAM, CD-R/RW for
archiving your recordings
Software
•Ulead Filmbrennerei 2/MovieFactory 3