TES APM-12 User manual

(WALL MOUNT is Option)
APM-12
The 12.0” TFT-LCD
(Thin Film Transistor Liquid Crystal Display)
User Manual
Version 1.0 2020/07

1
About This Document
No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or
by any means, including, but not limited to, electronic, magnetic, optical, chemical,
manual, or otherwise without prior written permission of TES Touch Embedded
Solutions Inc..
The information in this document is subject to change without notice. TES makes no
representations or warranties with respect to the contents herein, and specifically
disclaims any implied warranties of merchantability or fitness for a particular purpose.
TES reserves the right to revise this publication and to make changes from time to time
in the content hereof without obligation of TES to notify any person of such revisions or
changes. Windows is a registered trademark of Microsoft, Inc. Other brand or product
names are trademarks of their respective holders.

2
FCC/ IC Statement
This device complies with Part 15 of the FCC Rules and Canadian ICES-003/NMB-003
regulation. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning:
This device generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case you will be required to correct the
interference at your own expense.

3
Usage Notice
Precautions
Please follow all warnings, precautions and maintenance as recommended in this user’s
manual to maximize the life of your unit.
Do ：
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the product housing.
Use only the qualified power adapter that comes with your device.
Disconnect the power plug from AC outlet if the product is not going to be used for
an extended period of time.
Don’t ：
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
! Warning - To prevent the risk of fire or shock hazards, and do not
expose the product to moisture.
! Warning - Please do not open or disassemble the product as this may
cause electric shock.
! Warning - Power cord shall be connected to a socket-outlet with
earthing connection.
! Warning - Stability Hazard. The touch monitor may fall, causing
serious personal injury or death. To prevent injury, this
touch monitor must be securely attached to the wall in
accordance with the installation instructions.

4
Avis d’utilisation
Précautions
Veuillez suivre toutes les mises en garde, précautions et entretiens recommandés dans
ce manuel d’utilisation pour maximiser la durée de vie de votre unité.
À faire :
Éteindre l’appareil avant de le nettoyer.
Utiliser un chiffon humidifié par une solution savonneuse pour nettoyer le boîtier du
produit.
Utiliser uniquement l’adaptateur d’alimentation prescrit pour votre appareil.
Débrancher l’appareil lorsqu’il n’est pas utilisé pendant une période prolongée.
À éviter :
Ne pas utiliser de nettoyants abrasifs, de cires ou de solvants pour le nettoyage
Ne jamais utiliser l’appareil dans les conditions suivantes :
– des conditions environnementales extrêmes (chaud, froid ou humidité)
– des endroits remplis de poussières et de saletés.
– à proximité d’appareils produisant un fort champ magnétique.
! Mise en garde — Pour prévenir les risques d’incendie ou
d’électrocution, ne pas exposer le produit à l’humidité.
! Mise en garde — Prière de ne pas ouvrir ou démonter le produit, car
cela pourrait entraîner l’électrocution.
! Mise en garde — Le cordon d’alimentation doit être branché à une
prise pourvue d’une mise à la terre.
! Mise en garde — Risque de renversement. Le moniteur tactile peut se
renverser et causer de graves blessures corporelles, voire la mort.
Pour prévenir les blessures, ce moniteur tactile doit être solidement
fixé au mur selon les instructions d’installation.

5
Table of Contents
Chapter 1 ........................................................................................................................6
1.1 Overview....................................................................................................................7
1.2 Feature ......................................................................................................................7
1.3 Specifications.............................................................................................................7
1.4 Block Diagram............................................................................................................9
1.5 Interface Connectors..................................................................................................9
1.5.1 Power Connector ............................................................................................... 9
1.5.2 Video Signal Connector ..................................................................................... 9
1.6 Package Overview...................................................................................................12
Chapter 2 ......................................................................................................................17
2.1 About VESA Mount..................................................................................................18
2.2 About Wall Mount.....................................................................................................19
2.2.1 Landscape ....................................................................................................... 19
2.2.2 Face Up ........................................................................................................... 21
2.3 On-Screen Display...................................................................................................22
2.3.1 OSD Function Description................................................................................ 24
2.3.2 Timing Table Chart........................................................................................... 25
2.3.3 EDID Data........................................................................................................ 25
2.4 Dimension................................................................................................................26
2.4.1 Front View........................................................................................................ 26
2.4.2 Side View ......................................................................................................... 26
2.4.3 Rear View......................................................................................................... 27
Appendix ......................................................................................................................28

6
Chapter 1
Product Introduction

7
1.1 Overview
The APM-12 series is a 12” touchscreen monitor that builds to withstand commercial
grade open frame monitor, with stylish thin cable management bracket and versatile
design APM-12 is an exceptional choice for applications for all business sectors and well
suited for point-of-sales, point-of-information, point-of-service and interactive signage.
1.2 Feature
Cable management bracket design for easy organize cable.
1.3 Specifications
LCD Touch Panel
Size 12” TFT LCD
Brightness
APM-12110P01001/APM-12110P01002:
Typical 500 cd/m2; min. 400cd/m2(Non-touch screen)
Typical 450 cd/m2; min. 360cd/m2(P-CAP)
APM-12110P01004:
Typical 600 cd/m2; min. 480cd/m2(Non-touch screen)
Typical 510 cd/m2; min. 408cd/m2(P-CAP)
Number of Pixels 1024(H) x 768(V)
Touch Type P-CAP/10 points
Environment
Compliance IP65(only front bezel)
Operating Temperature 0°C ~ 40°C (APM-12110P01001 and APM-12110P01002)
-20°C ~ 60°C (APM-12110P01004)
Non-Operating Temperature
-20°C ~60°C (APM-12110P01001 and APM-12110P01002)
-40°C ~ 75°C (APM-12110P01004)
Storage Temperature -20°C ~60°C (APM-12110P01001 and APM-12110P01002)
-20°C ~ 60°C (APM-12110P01004)
Operating Humidity 20% ~ 80% RH, non-condensing
Mounting
100x100 mm
(75x75mm by VESA Bracket) for APM-12110P01001
Option for APM-12110P01002/APM-12110P01004

8
Dimension (W x H x D)
308.31mm x 268.9mm x 47.3mm - APM-12110P01001
308.31mm x 268.9mm x 41.3mm - APM-12110P01002
308.31mm x 268.9mm x 41.3mm - APM-12110P01004
Net Weight 2.3 kg (APM-12110P01001)
2.2 kg (APM-12110P01002 and APM-12110P01004)
Gross Weight 4.1 kg (APM-12110P01001)
4.0 kg (APM-12110P01002 and APM-12110P01004)

9
1.4 Block Diagram

10
1.5 Interface Connectors
1.5.2 Video Signal Connector

11
VGA
The video signal input via D-type 15-pin female connector.
Connector Pin Assignment:
Pin Signal
1 RED
2 GREEN
3 BLUE
4 NC
5 GND
6 RED_RTN
7 GREEN_RTN
8 BLUE_RTN
9 + 5V
10 GND
11 NC
12 SDA
13 HSYNC
14 VSYNC
15 SCL
Display Port (1.2a)
NotavailableforAPM-12110P01001
Pin Signal Pin Signal
1 ML_Lane 0(p) Data0 + 11 Signal ground
2 Signal ground 12 ML_Lane 3(n) Data3 -
3 ML_Lane 0(n) Data0 - 13 Signal ground
4 ML_Lane 1(p) Data1 + 14 Signal ground
5 Signal ground 15
AUX_CH(p) AUX + Signal for
Auxiliary Channel
6 ML_Lane 1(n) Data1 - 16 Signal ground
7 ML_Lane 2(p) Data2 + 17 AUX_CH(n) AUX - Signal for
Auxiliary Channel
8 Signal ground 18 Hot Plug
9 ML_Lane 2(n) Data 2 - 19 DP_PWR Return
10 ML_Lane 3(p) Data3 + 20 DP_PWR

12
HDMI 1.3 (Compatible with HDMI 1.4)
Pin Signal Pin Signal
1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock–
3 TMDS Data2– 13 CEC
4 TMDS Data1+ 14 Reserved (N.C. on device)
5 TMDS Data1 Shield 15 SCL
6 TMDS Data1– 16 SDA
7 TMDS Data0+ 17 DDC/CEC Ground
8 TMDS Data0 Shield 18 +5V Power
9 TMDS Data0– 19 Hot Plug Detect
10 TMDS Clock+
1.5.3 USB Connector
Pin Signal
1VCC
2D-
3D+
4GND

13
1.5.4 DC Jack
Pin Signal
1+12v
2GND
1.5.5 RJ45 (Remote OSD key)
Pin Signal
1POWER
2SELECT
3DOWN
4UP
5MENU
6GROUND
7NC
8NC
1.5.6 PHONE Jack(Audio-Out)
Pin Signal
1Left
2Right
3GND

14
1.6 Package Overview
APM-12110P01001
LCD Display Power Cord DC Power Supply
OSD Key pad HDMI cable VGA cable
USB cable (A to B) Brackets Screw
VESA Mount Bracket

15
APM-12110P01002/APM-12110P01004
LCD Display Power Cord DC Power Supply
OSD Key pad DP cable VGA cable
USB cable (A to B) HDMI cable

16
Construction A
(APM-12110P01001)
B
(APM-12110P01002)
C
(APM-12110P01004)
LCD Panel type A B B
I/O ports HDMI/VGA HDMI/VGA/DP HDMI/VGA/DP
Tma 40 degree C
minimum
40 degree C
minimum
60 degree C
minimum
*Tma=40 degree C minimum (for Construction A & B) or 60 degree C minimum (for Construction C)
*Tma= 40 degrés C minimum (pour la construction A et B) ou 60 degrés C minimum (pour la construction C)
! Warming!
This product is intended to be supplied by a Listed Power Adapter or DC
power source, rated 12Vdc, 1.5A minimum, 40 degree C minimum (for
Construction A & B) or 60 degree C minimum (for Construction C), and
the altitude of operation = 3048m minimum. If it needs further assistance
with purchasing the power source, please contact to TES for further information.
! Mise en garde!
Ce produit est destiné à être alimenté par un adaptateur secteur homologué ou
une source d'alimentation CC, de 12 V CC, 1,5 A minimum, 40 degrés C minimum
(pour les constructions A et B) ou 60 degrés C minimum (pour les constructions
C), et l'altitude de fonctionnement = 3048m minimum. S'il a besoin d'une
assistance supplémentaire Lors de l'achat de la source d'alimentation, veuillez
contacter TES pour plus d'informations.

17
Chapter 2
Product Installation

18
2.1 About VESA Mount (APM-12110P01001)
The APM-12 series conform to the “VESA Flat Display Mounting Interface Standard” which
defines a physical mounting interface for touch monitor and corresponding with the standards
of touch monitor mounting devices. The VESA mount is located on the back of this unit.
VESA Mount
(75x75mm by
VESA Bracket)
! Warming!
Please select the TES original screws!
The distance between the back cover surface and the bottom of the screw hole
is 8 mm. Please use four M4 screws diameter with 8-10mm proper length to
mount your monitor.
Note: The mounting stand must be able to support at least 7.67 lbs (3.48 Kg).
! Mise en garde!
Sélectionner les vis d’origine de TES!
La distance entre la surface du couvercle arrière et le bas de l’orifice de la vis est
de 8 mm. Utiliser les vis M4 de 8-10 diamètre pour le montage de votre moniteur.
Remarque : Le support de montage doit pouvoir supporter un poids d’au moins
7.67 lb (3,48kg).

19
2.2 About Wall Mount
The APM-12 series support wall mount and this monitor can be mounted to the wooden or
concrete wall with 8xM4 screws diameter with 6mm length and two bracket set on the
opposites.
2.2.1 Landscape
Depending on your mounting scheme, alternately, you may use the side brackets to mount
your displays onto your wall or device.
Find a suitable location for attaching side brackets.
A. The left and right sides
B. The Top and bottom sides