Tescom Nobby NTE10 User manual

………………… 9
…… 8
………………… 4
…… 11・12
………… 13
…………………… 14
……… 20
………………………… 19
……………… 18
………………… 15
……………… 16～18
……………… 19
………………… 5
………… 1・2
… 3
…………… 10
………………… 6-8
……… 9
Safety Warnings
Names and Functions of Parts
How to Charge
Troubleshooting
Specifications
When to Charge/
When Using Overseas/
When Using while Plugged In
Before Using
How to Use
Care and Maintenance
………………………… 29
……………… 28
……………… 26～28
SkinCoolPat・ ・スキンクールパット NTE10 4374-1
Forhouseholduse・家庭用
Table of Contents
もくじ
取扱説明書
Manual
NTE10
……… 21・22
… 23
……………… 24
…… 30
………… 25
安全上のご注意
各部のなまえとはたらき
充電のしかた
故障かな？と思ったら
仕様
充電の時期について /
海外でのご使用について/
交流式で使うには
お使いになる前に
使いかた
お手入れのしかた ………… 29
SkinCoolPat
スキンクールパット
● Make sure that the Cool/LED Head parts are undamaged before use.
『 Inspecting Skin Cool Pat that has been used for a long time! 』
Printed in JapanTescom Denki Co.,Ltd.
● ご使用前に必ずクール・フォトヘッド部に損傷がないかお確かめください。
『長年ご使用のスキンクールパットの点検を！』
お買い上げありがとうございまし
た。ご使用になる前に、この取扱説
明書を必ずお読みいただき、正しく
ご使用ください。お読みになった後
は、お使いになる方がいつでも見ら
れるところに必ず保管してくださ
い。
Thank you for your purchase.
Before using this product, be
sure to read the manual and
use the product correctly.
After reading, keep the manual
in a location where users of
the product can find it easily.

For actions that could cause serious
injury or death if done improperly.
For actions that could cause injury or
property damage if done improperly.
（Always perform an action indicated
by the image to the left）
（The image to the left indicates
“no taking the product apart.”）
This symbol indicates an action
that must not be performed.
This symbol indicates an action
that must be performed.
It can cause skin problems or pain.
I t can cause accidents or malfunction, or damage
the product.
Do not let children use the product.
Do not use in reach of toddlers.
There is a risk of accident or injury.
Consult with a doctor before use if any
of the following apply.
●
Heart problems
●
Acute (painful) illness
●
Fever
●
Abnormal blood pressure
●
Infectious disease
●
Tuberculosis
●
Malignant tumor
●
Facial neuralgia
●
Pregnancy
●
While on period
●
Atopic eczema
●
Allergies
●
Particularly sensitive skin
●
Hemophilia
●
Receiving dental treatment
●
Capillary dilatation due to long-term steroidal
hormone treatments or liver dysfunction
●
While under the influence of drugs or alcohol,
or extremely tired
There is a risk of accident or injury.
Do not use on the following areas.
●
Areas where plastic surgery was performed
●
Eyeballs and eyelids
●
Injuries
●
Facial melanosis
●
Inside the mouth or other mucous areas
●
Areas inflamed with pimples or other breakouts
●
Areas with impairment of pain sensation or of
perception
●
Areas with metal, plastic, silicone or other objects
under the skin
●
Areas that are itchy, have a rash or other stains
with physical stimuli
●
Areas inflamed due make-up or other reasons
There is a risk of accident or injury.
●
If the power cord is twisted and does not return
properly.
●
If the base of the power cord or adapter has
warped or is damaged.
If the power cord is disconnected, there is a risk of
sparks occurring and causing burns or electric shock.
Alert
There is a risk of fire or electric shock.
Do not damage the power cord. (Do
not pull, twist, or bend it unnecessarily,
do not place heavy objects on it, do
not place it near heat, do not bundle it,
do not squeeze it, do not modify it)
There is a risk of fire or electric shock.
Do not wrap the power cord
around the power adapter.
Do not use on toddlers, children or pets.
There is a risk of accident or injury.
Place out of reach of toddlers.
The cap and other small parts may be swallowed
accidentally.
There is a risk that the power cord
will disconnect and cause fire,
electric shocks or burns.
Do not use with power sources
other than AC100-240V.
There is a risk of fire or electric shock. Do not use at the same time as
other beauty goods.
There is a risk of accident or injury.
Do not drop or hit the product.
Do not apply strong impacts to the
product.
There is a risk of electric shock, fire or injury.
Do not wipe the product with
benzine, paint thinner or alcohol,
nor spray disinfectant on the prod-
uct.
There is a risk of cracking, electric shock or fire.
Do not use power adapters other
than the one that comes with the
product. Do not charge other prod-
ucts with the power adapter.
There is a risk of electric shock or fire.
Do not use for commercial purposes.
Do not put it in a place unknown
numbers of people may use it.
Continued use can cause malfunctions.
Do not use if damaged.
There is a risk of electric shock, fire or injury.
Do not share with family or strang-
ers.
There is a risk of infection.
Before using, check that the Cool
Head and LED Head are not dam-
aged or deformed.
There is a risk of damaging skin.
Remove contact lenses and acces-
sories such as earrings and neck-
laces before using.
There is a risk of accident or injury.
When removing the power adapter
from the outlet, grasp the adapter
itself instead of the power cord.
There is a risk of fire or electric shock.
Use Cool Facial Care with an ambient
temperature between 10 and 40°C.
There is a risk of skin damage.
There is a risk of the power cord
disconnecting when used improperly
or for long periods, so do not use the
product in the following situations:
Do not use the product on wounds or
inflammation of skin.
Do not use when the power cord is dam-
aged or loose in the socket.
Do not use the product for uses other
than those listed in the manual.
Follow directions in manual for
frequency and duration of use.
There is a risk of accident or injury.
When first using the product, track
condition of skin.
There is a risk of skin problems or poor health.
Do not plug in or remove the power
adapter with wet hands.
There is a risk of malfunction, electric shock
or short circuit.
Do not wash with water. Do not place
the product in water or splash it
with water.
There is a risk of malfunction or short circuit.
Do not use or store the product in a
place with high moisture or where it
might get wet, such as a bathroom.
There is a risk of malfunction or short circuit.
Do not modify the product. Do not
dismantle or repair the product if
you are not a repair technician.
There is a risk of fire, electric shock or injury.
Remove the power
adapter from the
outlet when not in use.
There is a risk of fire or
electric shock.
power
adapter
If the product makes abnormal
noises or some other irregularity
occurs, stop use immediately.
There is a risk of accident or injury.
Do not look at the LED Care light
directly for long periods of time.
There is a risk of accident or injury.
If you experience pain or discom-
fort while using the product or
issues with your skin after using
the product, stop using the product
and consult a medical specialist.
It could cause skin problems.
Safety Warnings
● Make sure to read these safety warnings before using, and use the product correctly.
● The warnings listed here are to ensure the product is used properly and safely, and avoid any injury
to the user or others or damage to property in advance. Make sure to follow the warnings.
● Safety warnings are separated into categories as follows.
Warning
For actions that have a significant
chance to cause serious injury
or death if done improperly.
Examples of Symbols
Danger
Alert
Warning
Safety Warnings
Required
Prohibited
Remove
Power Adapter
Prohibited
Prohibited
Required
No Wet Hands
No Getting Wet
No Wet Areas
No Dismantling
Prohibited
Required
1
2

For actions that could cause serious
injury or death if done improperly.
For actions that could cause injury or
property damage if done improperly.
（Always perform an action indicated
by the image to the left）
（The image to the left indicates
“no taking the product apart.”）
This symbol indicates an action
that must not be performed.
This symbol indicates an action
that must be performed.
It can cause skin problems or pain.
I t can cause accidents or malfunction, or damage
the product.
Do not let children use the product.
Do not use in reach of toddlers.
There is a risk of accident or injury.
Consult with a doctor before use if any
of the following apply.
●
Heart problems
●
Acute (painful) illness
●
Fever
●
Abnormal blood pressure
●
Infectious disease
●
Tuberculosis
●
Malignant tumor
●
Facial neuralgia
●
Pregnancy
●
While on period
●
Atopic eczema
●
Allergies
●
Particularly sensitive skin
●
Hemophilia
●
Receiving dental treatment
●
Capillary dilatation due to long-term steroidal
hormone treatments or liver dysfunction
●
While under the influence of drugs or alcohol,
or extremely tired
There is a risk of accident or injury.
Do not use on the following areas.
●
Areas where plastic surgery was performed
●
Eyeballs and eyelids
●
Injuries
●
Facial melanosis
●
Inside the mouth or other mucous areas
●
Areas inflamed with pimples or other breakouts
●
Areas with impairment of pain sensation or of
perception
●
Areas with metal, plastic, silicone or other objects
under the skin
●
Areas that are itchy, have a rash or other stains
with physical stimuli
●
Areas inflamed due make-up or other reasons
There is a risk of accident or injury.
●
If the power cord is twisted and does not return
properly.
●
If the base of the power cord or adapter has
warped or is damaged.
If the power cord is disconnected, there is a risk of
sparks occurring and causing burns or electric shock.
Alert
There is a risk of fire or electric shock.
Do not damage the power cord. (Do
not pull, twist, or bend it unnecessarily,
do not place heavy objects on it, do
not place it near heat, do not bundle it,
do not squeeze it, do not modify it)
There is a risk of fire or electric shock.
Do not wrap the power cord
around the power adapter.
Do not use on toddlers, children or pets.
There is a risk of accident or injury.
Place out of reach of toddlers.
The cap and other small parts may be swallowed
accidentally.
There is a risk that the power cord
will disconnect and cause fire,
electric shocks or burns.
Do not use with power sources
other than AC100-240V.
There is a risk of fire or electric shock. Do not use at the same time as
other beauty goods.
There is a risk of accident or injury.
Do not drop or hit the product.
Do not apply strong impacts to the
product.
There is a risk of electric shock, fire or injury.
Do not wipe the product with
benzine, paint thinner or alcohol,
nor spray disinfectant on the prod-
uct.
There is a risk of cracking, electric shock or fire.
Do not use power adapters other
than the one that comes with the
product. Do not charge other prod-
ucts with the power adapter.
There is a risk of electric shock or fire.
Do not use for commercial purposes.
Do not put it in a place unknown
numbers of people may use it.
Continued use can cause malfunctions.
Do not use if damaged.
There is a risk of electric shock, fire or injury.
Do not share with family or strang-
ers.
There is a risk of infection.
Before using, check that the Cool
Head and LED Head are not dam-
aged or deformed.
There is a risk of damaging skin.
Remove contact lenses and acces-
sories such as earrings and neck-
laces before using.
There is a risk of accident or injury.
When removing the power adapter
from the outlet, grasp the adapter
itself instead of the power cord.
There is a risk of fire or electric shock.
Use Cool Facial Care with an ambient
temperature between 10 and 40°C.
There is a risk of skin damage.
There is a risk of the power cord
disconnecting when used improperly
or for long periods, so do not use the
product in the following situations:
Do not use the product on wounds or
inflammation of skin.
Do not use when the power cord is dam-
aged or loose in the socket.
Do not use the product for uses other
than those listed in the manual.
Follow directions in manual for
frequency and duration of use.
There is a risk of accident or injury.
When first using the product, track
condition of skin.
There is a risk of skin problems or poor health.
Do not plug in or remove the power
adapter with wet hands.
There is a risk of malfunction, electric shock
or short circuit.
Do not wash with water. Do not place
the product in water or splash it
with water.
There is a risk of malfunction or short circuit.
Do not use or store the product in a
place with high moisture or where it
might get wet, such as a bathroom.
There is a risk of malfunction or short circuit.
Do not modify the product. Do not
dismantle or repair the product if
you are not a repair technician.
There is a risk of fire, electric shock or injury.
Remove the power
adapter from the
outlet when not in use.
There is a risk of fire or
electric shock.
power
adapter
If the product makes abnormal
noises or some other irregularity
occurs, stop use immediately.
There is a risk of accident or injury.
Do not look at the LED Care light
directly for long periods of time.
There is a risk of accident or injury.
If you experience pain or discom-
fort while using the product or
issues with your skin after using
the product, stop using the product
and consult a medical specialist.
It could cause skin problems.
Safety Warnings
● Make sure to read these safety warnings before using, and use the product correctly.
● The warnings listed here are to ensure the product is used properly and safely, and avoid any injury
to the user or others or damage to property in advance. Make sure to follow the warnings.
● Safety warnings are separated into categories as follows.
Warning
For actions that have a significant
chance to cause serious injury
or death if done improperly.
Examples of Symbols
Danger
Alert
Warning
Safety Warnings
Required
Prohibited
Remove
Power Adapter
Prohibited
Prohibited
Required
No Wet Hands
No Getting Wet
No Wet Areas
No Dismantling
Prohibited
Required
1
2

①
②
Names and Functions of Parts
[Normal Use]
Off: Charge remaining
Blinking: Low charge
[While Charging]
On: Charging
Off: Charging complete
Do not put objects
in here.
Do not put objects in here. Main Body Socket
Power Adapter Cap
■Accessories
Pushing the switch
turns it ON and
causes the Cool
Facial Care power
light to blink. Push-
ing again turns it
OFF and turns off
the Cool Facial
Care power light.
Pushing the LED
Switch while the
Cool Switch is on
will switch to LED
Care and turn off
the Cool Facial
Care power light.
Place on the skin
and use for Cool
Facial Care.
Blinks when the Cool
Switch is pushed, and
becomes solid when
cooling preparation is
complete.
When the switch is
pushed, it turns
ON and the LED
Head blinking
pattern begins.
Push again to turn
OFF and the LED
Head turns off.
If the Cool Switch
is pushed while in
use, the LED Head
will turn off and it
will switch to Cool
Facial Care.
Place on the skin
and use for LED
Care.
* Follow regional laws when disposing of this product.
How to Charge
W a r n i n g
● Once charging is complete, remove the power adapter from the outlet.
● Use with an ambient temperature between 10 and 40°C.
1
Confirm the Cool Switch and LED
Switch are OFF, and connect the
power adapter to the main unit and
outlet.
●
Pushing the unit-side plug of the power adapter
too hard or forcefully bending it can damage the
unit socket.
2
When the Battery Light turns off,
unplug the power adapter from the
main unit and outlet.
●
The average charging time is approximately 5
hours.
●
While charging, the main unit and power adapter
may become warm, but this is not a malfunction.
●
One charge allows for use of approximately 5
sets. (1 set: 5 minutes of LED Care and 5
minutes of Cool Facial Care)
(Based on factors such as conditions of use and
maintenance, the number of sets may decrease)
①
②
Battery Light
On: Charging
Off: Charging
complete
Cool Head
Cool Switch
Battery Light
Air Intake
LED Head
LED Switch
Air Exhaust
Cool Facial Care
Power Light
Power Cord
Unit-side Plug
Power Plug
Nickel Metal
Hydride Battery
(Internal)
The Battery Light will turn on while charging,
and turn off when charging is complete.
When the operating time after charging becomes extremely short, the following
procedure can refresh the battery and improve operating time.
１．Push both the Cool Switch and LED Switch simultaneously for over 10 seconds.
When the Cool Facial Care power light and Battery Light start blinking, stop
pushing theswitches. Let the charge run out until the lights turn off.
２．Charge as normal.
How to Have a Long-lasting Nickel Metal Hydride Battery
● When storing the product, fully charge it before storage.
● When not using for a long time, charge periodically every six months.
3
4

①
②
Names and Functions of Parts
[Normal Use]
Off: Charge remaining
Blinking: Low charge
[While Charging]
On: Charging
Off: Charging complete
Do not put objects
in here.
Do not put objects in here. Main Body Socket
Power Adapter Cap
■Accessories
Pushing the switch
turns it ON and
causes the Cool
Facial Care power
light to blink. Push-
ing again turns it
OFF and turns off
the Cool Facial
Care power light.
Pushing the LED
Switch while the
Cool Switch is on
will switch to LED
Care and turn off
the Cool Facial
Care power light.
Place on the skin
and use for Cool
Facial Care.
Blinks when the Cool
Switch is pushed, and
becomes solid when
cooling preparation is
complete.
When the switch is
pushed, it turns
ON and the LED
Head blinking
pattern begins.
Push again to turn
OFF and the LED
Head turns off.
If the Cool Switch
is pushed while in
use, the LED Head
will turn off and it
will switch to Cool
Facial Care.
Place on the skin
and use for LED
Care.
* Follow regional laws when disposing of this product.
How to Charge
W a r n i n g
● Once charging is complete, remove the power adapter from the outlet.
● Use with an ambient temperature between 10 and 40°C.
1
Confirm the Cool Switch and LED
Switch are OFF, and connect the
power adapter to the main unit and
outlet.
●
Pushing the unit-side plug of the power adapter
too hard or forcefully bending it can damage the
unit socket.
2
When the Battery Light turns off,
unplug the power adapter from the
main unit and outlet.
●
The average charging time is approximately 5
hours.
●
While charging, the main unit and power adapter
may become warm, but this is not a malfunction.
●
One charge allows for use of approximately 5
sets. (1 set: 5 minutes of LED Care and 5
minutes of Cool Facial Care)
(Based on factors such as conditions of use and
maintenance, the number of sets may decrease)
①
②
Battery Light
On: Charging
Off: Charging
complete
Cool Head
Cool Switch
Battery Light
Air Intake
LED Head
LED Switch
Air Exhaust
Cool Facial Care
Power Light
Power Cord
Unit-side Plug
Power Plug
Nickel Metal
Hydride Battery
(Internal)
The Battery Light will turn on while charging,
and turn off when charging is complete.
When the operating time after charging becomes extremely short, the following
procedure can refresh the battery and improve operating time.
１．Push both the Cool Switch and LED Switch simultaneously for over 10 seconds.
When the Cool Facial Care power light and Battery Light start blinking, stop
pushing theswitches. Let the charge run out until the lights turn off.
２．Charge as normal.
How to Have a Long-lasting Nickel Metal Hydride Battery
● When storing the product, fully charge it before storage.
● When not using for a long time, charge periodically every six months.
3
4

Before Using
How to Use
This product has 2 kinds of care functions.
Do not use either Care more than twice per day (5 minutes or less each time).
The LED Switch and Cool Switch automatically turn off 5 minutes after being pushed.
・ When using around the eyes, close your eyes as it
is bright.
・ Avoid looking directly at the light for long periods
of time.
There is a risk of accident or injury.
1Remove cap.
2
●
Push down on the LED Switch for a while.
● The LED Head will start to slowly blink.
3
Gently apply the Head mainly to the area
where you have issues with your pores
(nose, cheeks, etc.) and slowly move it.
4
● When that happens, a beeping noise will alert you.
After 5 minutes the power will automati-
cally shut off.
Step 1 LED Care
LED blinking
pattern
(Image)
Gradually blinking
(approx. 1 second)
Maximum illumination
(approx. 2 seconds) Off
Repeat
When you want to stop partway through
● Push the LED Switch again and the LED Head will
turn off.
For dry skin, apply beauty wash before use.
After applying beauty wash, be sure skin is dry before using.
*Do not use milky or gel beauty washes.
Consult with a doctor before
use if any of the following
apply.
There is a risk of accident or injury.
Heart problems
Acute (painful) illness
Fever
Abnormal blood pressure
Infectious disease
Tuberculosis
Malignant tumor
Facial neuralgia
Pregnancy
While on period
Atopic eczema
Allergies
Particularly sensitive skin
Hemophilia
Receiving dental treatment
Capillary dilatation due to long-
term steroidal hormone treat-
ments or liver dysfunction
While under the influence of drugs
or alcohol, or extremely tired
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Do not use on the following
areas.
There is a risk of accident or injury.
Areas where plastic surgery was
performed
Eyeballs and eyelids
Injuries
Facial melanosis
Inside the mouth or other mucous
areas
Areas inflamed with pimples or
other breakouts
Areas with impairment of pain
sensation or of perception
Areas with metal, plastic, silicone
or other objects under the skin
Areas that are itchy, have a rash
or other stains
Areas inflamed due make-up or
other reasons
This appliance is not designed to be used by people
(including children) with reduce physical, sensorial or
mental capacities, or by people with no prior experience or
knowledge, except where they have been able to benefit
from supervision or previous instruction relating to use of
the appliance from a person responsible for their safety.
●
●
●
●
●
●
●
●
●
●
Alert
Wash your face and clean off any dirt.
● Use cleanser to remove makeup.
Use on skin without any makeup.
Use for 5 minutes or less.
LED Care: Using light to improve skin elasticity
Cool Facial Care: Cooling to tighten pores
If you experience any abnormalities with your skin or body while
using, immediately stop use and consult with a medical specialist.
There is a risk of accident or poor health.
* Guidelines for skin care are to use each type of care twice per
day, for no more than 5 minutes each time.
Using continuously for over 5 minutes can lead to skin problems, so please
refrain from doing so.
● Use for 5 minutes or less. The power will automatically
shut off 5 minutes after pushing the LED Switch.
Alert
Alert
5
6

Before Using
How to Use
This product has 2 kinds of care functions.
Do not use either Care more than twice per day (5 minutes or less each time).
The LED Switch and Cool Switch automatically turn off 5 minutes after being pushed.
・ When using around the eyes, close your eyes as it
is bright.
・ Avoid looking directly at the light for long periods
of time.
There is a risk of accident or injury.
1Remove cap.
2
●
Push down on the LED Switch for a while.
● The LED Head will start to slowly blink.
3
Gently apply the Head mainly to the area
where you have issues with your pores
(nose, cheeks, etc.) and slowly move it.
4
● When that happens, a beeping noise will alert you.
After 5 minutes the power will automati-
cally shut off.
Step 1 LED Care
LED blinking
pattern
(Image)
Gradually blinking
(approx. 1 second)
Maximum illumination
(approx. 2 seconds) Off
Repeat
When you want to stop partway through
● Push the LED Switch again and the LED Head will
turn off.
For dry skin, apply beauty wash before use.
After applying beauty wash, be sure skin is dry before using.
*Do not use milky or gel beauty washes.
Consult with a doctor before
use if any of the following
apply.
There is a risk of accident or injury.
Heart problems
Acute (painful) illness
Fever
Abnormal blood pressure
Infectious disease
Tuberculosis
Malignant tumor
Facial neuralgia
Pregnancy
While on period
Atopic eczema
Allergies
Particularly sensitive skin
Hemophilia
Receiving dental treatment
Capillary dilatation due to long-
term steroidal hormone treat-
ments or liver dysfunction
While under the influence of drugs
or alcohol, or extremely tired
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Do not use on the following
areas.
There is a risk of accident or injury.
Areas where plastic surgery was
performed
Eyeballs and eyelids
Injuries
Facial melanosis
Inside the mouth or other mucous
areas
Areas inflamed with pimples or
other breakouts
Areas with impairment of pain
sensation or of perception
Areas with metal, plastic, silicone
or other objects under the skin
Areas that are itchy, have a rash
or other stains
Areas inflamed due make-up or
other reasons
This appliance is not designed to be used by people
(including children) with reduce physical, sensorial or
mental capacities, or by people with no prior experience or
knowledge, except where they have been able to benefit
from supervision or previous instruction relating to use of
the appliance from a person responsible for their safety.
●
●
●
●
●
●
●
●
●
●
Alert
Wash your face and clean off any dirt.
● Use cleanser to remove makeup.
Use on skin without any makeup.
Use for 5 minutes or less.
LED Care: Using light to improve skin elasticity
Cool Facial Care: Cooling to tighten pores
If you experience any abnormalities with your skin or body while
using, immediately stop use and consult with a medical specialist.
There is a risk of accident or poor health.
* Guidelines for skin care are to use each type of care twice per
day, for no more than 5 minutes each time.
Using continuously for over 5 minutes can lead to skin problems, so please
refrain from doing so.
● Use for 5 minutes or less. The power will automatically
shut off 5 minutes after pushing the LED Switch.
Alert
Alert
5
6

1
Remove cap.
2
Push down on the Cool Switch for a while.
●
If the Cool Head feels too cold, use it in an area with a high ambient
temperature.
3
Begin using once the Cool Facial Care power light
becomes steady. Check the Cool Head with your
fingertip.
●
If the Air Intake or Exhaust are blocked, the Head will not cool properly.
4
Hold so as to not block the Air Intake or Exhaust.
●
For use on the same area, apply the head for 1 second and remove
it for 1 second, repeatedly.
●
The power will automatically shut off 5 minutes after pushing the
Cool Switch.
5
Gently apply the Head mainly to the area where
you have issues with your pores (nose, cheeks,
etc.) and slowly move it while patting.
When that happens, a beeping noise will alert you.
6
After 5 minutes the power will automatically
shut off.
After turning off the power, the temperature of the Cool
Head and main unit will temporarily increase, but this is not
a malfunction.
The main unit will warm up while in use, but this is not a malfunction.
The noise while using it is the cooler. It is not a malfunction.
Step 2 Cool Facial Care
Cool Head
●
Push the Cool Switch again and the Cool Facial Care power light
will turn off and cooling operation will end.
How to Use
How to Use
W a r n i n g
● Do not leave in direct sunlight (inside a car in summer, etc.) or near heating devices.
This can cause deformation or discoloration.
When you want to stop partway through
1
Connect the power adapter to the main unit and power
outlet.
2Being LED Care or Cool Facial Care.
Follow directions (Pages 6-7) for use.
3
After use, remove the power adapter from the outlet and
main unit.
To continue charging,
follow the directions on How to Charge (Page 4).
【 When to Charge】
●
The signal for low batteries is when the Battery Light begins blinking
while the power is on and a warning beeping occurs for 10 seconds
before the power automatically turns off.
→Charge immediately.
To continue using, use it while plugged in.
【When Using Overseas】
● This product can be used with AC100-240V power.
【When Using while Plugged In】
Battery Light
Air Exhaust
Air Intake
Alert
Do not use near eyes or ears.
(There is a risk of accident or poor health)
Do not use when skin is injured or cut.
(There is a risk of skin problems or pain)
Warning
● The Cool Facial Care power light will start to blink.
●
Wait until the cooling preparation ends and the Cool Facial
Care power light becomes steady. (Preparation takes appro x -
imately 60 seconds)
Use for 5 minutes or less (including cooling preparation time).
Perform maintenance (Page 9) before storing.
１. Put the cap on the head.
２. Make sure to charge the product.
３. Store it in an area with limited moisture or dust.
How to Store
Long-term
Use for 1 second or less in the same area.
(There is a risk of skin problems or pain)
7
8

1
Remove cap.
2
Push down on the Cool Switch for a while.
●
If the Cool Head feels too cold, use it in an area with a high ambient
temperature.
3
Begin using once the Cool Facial Care power light
becomes steady. Check the Cool Head with your
fingertip.
●
If the Air Intake or Exhaust are blocked, the Head will not cool properly.
4
Hold so as to not block the Air Intake or Exhaust.
●
For use on the same area, apply the head for 1 second and remove
it for 1 second, repeatedly.
●
The power will automatically shut off 5 minutes after pushing the
Cool Switch.
5
Gently apply the Head mainly to the area where
you have issues with your pores (nose, cheeks,
etc.) and slowly move it while patting.
When that happens, a beeping noise will alert you.
6
After 5 minutes the power will automatically
shut off.
After turning off the power, the temperature of the Cool
Head and main unit will temporarily increase, but this is not
a malfunction.
The main unit will warm up while in use, but this is not a malfunction.
The noise while using it is the cooler. It is not a malfunction.
Step 2 Cool Facial Care
Cool Head
●
Push the Cool Switch again and the Cool Facial Care power light
will turn off and cooling operation will end.
How to Use
How to Use
W a r n i n g
● Do not leave in direct sunlight (inside a car in summer, etc.) or near heating devices.
This can cause deformation or discoloration.
When you want to stop partway through
1
Connect the power adapter to the main unit and power
outlet.
2Being LED Care or Cool Facial Care.
Follow directions (Pages 6-7) for use.
3
After use, remove the power adapter from the outlet and
main unit.
To continue charging,
follow the directions on How to Charge (Page 4).
【 When to Charge】
●
The signal for low batteries is when the Battery Light begins blinking
while the power is on and a warning beeping occurs for 10 seconds
before the power automatically turns off.
→Charge immediately.
To continue using, use it while plugged in.
【When Using Overseas】
● This product can be used with AC100-240V power.
【When Using while Plugged In】
Battery Light
Air Exhaust
Air Intake
Alert
Do not use near eyes or ears.
(There is a risk of accident or poor health)
Do not use when skin is injured or cut.
(There is a risk of skin problems or pain)
Warning
● The Cool Facial Care power light will start to blink.
●
Wait until the cooling preparation ends and the Cool Facial
Care power light becomes steady. (Preparation takes appro x -
imately 60 seconds)
Use for 5 minutes or less (including cooling preparation time).
Perform maintenance (Page 9) before storing.
１. Put the cap on the head.
２. Make sure to charge the product.
３. Store it in an area with limited moisture or dust.
How to Store
Long-term
Use for 1 second or less in the same area.
(There is a risk of skin problems or pain)
7
8

Troubleshooting
Issues Possible Reasons
In the case of other errors or malfunctions, immediately stop use and contact the information
number on the product box.
Care and Maintenance
● Make sure the power is OFF. If you accidentally turn on the power, it could shock you or
cause a malfunction or short circuit.
● Do not wash the main unit with water. Do not immerse it in water or splash water on it. It
could cause malfunctions.
●
Do not wipe with benzine, paint thinner or alcohol. It could cause deformation or discoloration.
Use a soft, dry cloth to wipe off dirt on the main unit.
● When dirt does not come off easily
Soak a dry cloth in soapy water or a neutral cleaning
agent cut with water, and wring it out thoroughly
before wiping with it.
● Periodic maintenance
Periodically (at least once a month) clean the Air
Intake and Intake and grooves around the heads.
Use a soft toothbrush to remove dirt and dust.
Cool Head Groove LED Head Groove
Air Intake
*Make sure dust or dirt does not enter the main unit through the Air Intake.
Make sure the power is OFF and the power adapter is
not attached before performing maintenance.
Specifications
120ｇ
（main unit）
Cap
Power Adapter
Power
Source
Power
Consumption
Power
Adapter
Nickel Metal Hydride Battery (DC3.6V, 750mAh)
1 unit
Main Unit
When plugged in 10W
Cool Facial
Care
When plugged in 2W
LED Care
Height 111 mm x width 46 mm x depth 40 mm
(main unit)
Dimensions
Weight
Accessories
LED Care:
5 minutes (auto OFF)
Cool Facial Care:
5 minutes (auto OFF)
Product Name Rated
Time
Skin Cool Pat
AC100-240V 50/60Hz
Product Number NTE10
Charge
Time Approx. 5 hours
W a r n i n g
Solution
The Cool Head is not
cooling. The Air Intake or Exhaust is
blocked.
There is no charge left.
The LED Switch is not ON.
There is no charge left.
It was not used for over 3
months. (Natural discharge)
The product is charged despite
there still being charge
remaining. (Top-up charge)
The nickel metal hydride
battery is getting old.
The power adapter is not
connected properly.
The power adapter is
malfunctioning.
The power adapter is not
connected properly.
The plug is not connected
to the outlet firmly.
Push the Cool Switch and
confirm the Cool Facial Care
power light changes from
blinking to a steady light.
Hold properly to ensure
the Air Intake and Exhaust
are not blocked.
Charge it or use it while
plugged in.
Turn on the LED Switch.
Charge it or use it while
plugged in.
Charge it.
Use the battery fully
before charging.
Contact the information
number on the product box.
Make sure the power adapter
is securely connected to the
main unit and the outlet.
Contact the information
number on the product
box.
Firmly connect the unit-side
plug of the power adapter
to the main unit socket.
The issue may be with the
outlet. Contact the information
number on the product box.
The LED Head isn’t
lighting up.
It can only be used a few
times after charging.
The Battery Light starts
blinking too soon.
The power cord or
power adapter are
abnormally hot.
Charging does not work.
It cannot be used with
the power adapter
plugged in.（Not turning
on while plugged in）
The Cool Switch is not ON.
The power adapter is mal-
functioning. Or the main
unit is malfunctioning.
Contact the information
number on the product
box.
9
10

Troubleshooting
Issues Possible Reasons
In the case of other errors or malfunctions, immediately stop use and contact the information
number on the product box.
Care and Maintenance
● Make sure the power is OFF. If you accidentally turn on the power, it could shock you or
cause a malfunction or short circuit.
● Do not wash the main unit with water. Do not immerse it in water or splash water on it. It
could cause malfunctions.
●
Do not wipe with benzine, paint thinner or alcohol. It could cause deformation or discoloration.
Use a soft, dry cloth to wipe off dirt on the main unit.
● When dirt does not come off easily
Soak a dry cloth in soapy water or a neutral cleaning
agent cut with water, and wring it out thoroughly
before wiping with it.
● Periodic maintenance
Periodically (at least once a month) clean the Air
Intake and Intake and grooves around the heads.
Use a soft toothbrush to remove dirt and dust.
Cool Head Groove LED Head Groove
Air Intake
*Make sure dust or dirt does not enter the main unit through the Air Intake.
Make sure the power is OFF and the power adapter is
not attached before performing maintenance.
Specifications
120ｇ
（main unit）
Cap
Power Adapter
Power
Source
Power
Consumption
Power
Adapter
Nickel Metal Hydride Battery (DC3.6V, 750mAh)
1 unit
Main Unit
When plugged in 10W
Cool Facial
Care
When plugged in 2W
LED Care
Height 111 mm x width 46 mm x depth 40 mm
(main unit)
Dimensions
Weight
Accessories
LED Care:
5 minutes (auto OFF)
Cool Facial Care:
5 minutes (auto OFF)
Product Name Rated
Time
Skin Cool Pat
AC100-240V 50/60Hz
Product Number NTE10
Charge
Time Approx. 5 hours
W a r n i n g
Solution
The Cool Head is not
cooling. The Air Intake or Exhaust is
blocked.
There is no charge left.
The LED Switch is not ON.
There is no charge left.
It was not used for over 3
months. (Natural discharge)
The product is charged despite
there still being charge
remaining. (Top-up charge)
The nickel metal hydride
battery is getting old.
The power adapter is not
connected properly.
The power adapter is
malfunctioning.
The power adapter is not
connected properly.
The plug is not connected
to the outlet firmly.
Push the Cool Switch and
confirm the Cool Facial Care
power light changes from
blinking to a steady light.
Hold properly to ensure
the Air Intake and Exhaust
are not blocked.
Charge it or use it while
plugged in.
Turn on the LED Switch.
Charge it or use it while
plugged in.
Charge it.
Use the battery fully
before charging.
Contact the information
number on the product box.
Make sure the power adapter
is securely connected to the
main unit and the outlet.
Contact the information
number on the product
box.
Firmly connect the unit-side
plug of the power adapter
to the main unit socket.
The issue may be with the
outlet. Contact the information
number on the product box.
The LED Head isn’t
lighting up.
It can only be used a few
times after charging.
The Battery Light starts
blinking too soon.
The power cord or
power adapter are
abnormally hot.
Charging does not work.
It cannot be used with
the power adapter
plugged in.（Not turning
on while plugged in）
The Cool Switch is not ON.
The power adapter is mal-
functioning. Or the main
unit is malfunctioning.
Contact the information
number on the product
box.
9
10

11
12

11
12

②
①
②
①
13
14

②
①
②
①
13
14

15
16

15
16

17
18

17
18

19
20