10
Spot cleaning
User-defined area cleaning
Schedule cleaning
WiFi reset
DND mode (do not disturb)
Adjustment of suction power
Restricted area
Partial cleaning
When a local area needs a deep sweep, the user specifies a point on the map on the
APP, the robot will automatically drive to the vicinity of the point, take the point as the
center, and clean within 1.5m x 1.5m
Use the mobile APP to set the size and location of the area you want to clean.You can set
one or more areas. The robot would clean according to the areas you set.
Schedule cleaning can be set by mobile APP. The robot will start cleaning automatically
at the appointed time and return to the charging base after cleaning.
If the mobile phone cannot be connected to the robot due to modification
of router configuration and password or for other reasons, please press
key and key simultaneously for 3s till a voice prompt “WiFi has been
reset” is given and the indicator light turns purple and flickers slowly.
The robot will neither sweep the floor nor issue a voice automatically under DND mode.
The available time of DND mode can be startup or modified using mobile APP.
You can adjust the suction power to silent level, standard level and high level by mobile APP
Set one or more forbidden areas using mobile APP. The robot will not sweep forbidden
areas but other areas.
When the robot cannot be controlled by the mobile APP, please remove the robot to the
place you want to clean. Long press the button for 3 seconds, and the robot will clean
twice within the scope of 1.8mx1.8m centering on itself
1.8m
1.8m
NOTE
• The robot may intrude into the restricted area due to positioning errors, abnormal
sensors and other reasons.
• The permanent closed zone may become invalid due to the big change of the
position of the charging seat and furniture.Therefore, please try not to move or
interfere with the robot during cleaning.
• The permanent restricted area would be lost when the map is rebuilt.
