Texecom Premier RKP8 Plus User manual

INSTALLATION MANUAL
Remote Keypads
THANK YOU FOR VOTING TE
THANK YOU FOR VOTING TETHANK YOU FOR VOTING TE
THANK YOU FOR VOTING TEXECOM
XECOMXECOM
XECOM

2 INS181-2
1. INSTALLATION
The Premier RKP8/16 Plus remote keypads are suitable for use with the
following Texecom control panels: Premier 412 and Premier 816 with
Version 2.1 or higher panel software.Up to 6 keypads may be connected to
the system.
1.1 Mounting
Open the keypad by carefully inserting a small flat-blade screwdriver into
each slot at the base of the unit. Gently push the screwdriver to ease the
retaining clips upward, DO NOT LEVER OR TWIST. Excessive force is NOT
required. The front flap and front cover can now be removed.
1.2 Selecting an Address
Each keypad MUST be given a different address using the DIP switch on the
left hand side of the PCB as follows:
Address DIP 1 DIP 2 DIP 3 DIP 4
1 Off or On Off Off Off
2 Off On Off Off
3 Off Off On Off
4 Off Off Off On
5 On Off Off On
6 Off On Off On
NEVER set two RKPs to the same address.
Keypads are factory set to Address 1 (all switches off).
!
"

INS181-2 3
1.3 Wiring
It is strongly recommended that the system is completely powered down
(mains and battery) before wiring a keypad. Connect the keypad to the
control panel using 4-core cable as follows:
Keypad Control Panel
+ Data Bus +
- Data Bus -
T Data Bus T
R Data Bus R
Up to six keypads may be connected in parallel (‘star’) or series
(‘daisy-chain’) or any combination.
When using long cable runs or connecting keypads in series
(‘daisy-chain’) ensure that the voltage at the keypad is no less than
10.0V.
When using 6-core or 8-core cable always use the spare cores to
‘double-up’ on 0V. This will allow longer cable runs particularly when
connecting keypads in series (‘daisy-chain’). As a rule ‘trebling-up’ on
0V will be more beneficial than ‘doubling-up’ on 12V and 0V.
The Premier RKP8/16 Plus has two fully programmable zone inputs (Z1 COM
Z2). For information on wiring configuration options please refer to the
Premier 412/816 Installation Manual.
1.4 Programming
When the system is powered up it automatically checks and configures all
connected keypads.
In order to use the keypad zones, you must first enable the zones using
Menu 43 Option 1 (refer to the Premier 412/816 Installation Manual). When a
keypad has its zones enabled they are mapped onto the system as shown:
Keypad Address RKP Z1 RKP Z2
1 Zone 9 Zone 10
2 Zone 11 Zone 12
3 Zone 13 Zone 14
4 Zone 15 Zone 16
5 Not Available Not Available
6 Not Available Not Available
!
"

4 INS181-2
1.5 Technical Specifications
Operating Voltage: 9 – 13.7VDC
Current Consumption: Nominal: 35mA; When fully back lit: 85mA
Zone Indicators: 16 on the RKP16 Plus; 8 on the RKP8 Plus
Status Indicators: Alarm: Red; Service: Yellow; Fire: Red; Bypass/Omit: Red;
Instant: Red; Stay/Part: Red; Ready: Green; Armed: Red
Data Bus: 4-wire up to 250m Star, Daisy-Chain or any combination
Operating Temperature: -10°C to +45°C
Storage Temperature: -20°C to +60°C
Maximum Humidity: 95% non-condensing
EMC Environment: Residential/Commercial/Light Industrial or Industrial
Dimensions: 140mm x 115mm x 30mm
Packed Weight: 260g Approx.
1.6 Standards
Conforms to European Union (EU) Electro-Magnetic Compatibility (EMC)
Directive 89/336/EEC (amended by 92/31/EEC and 93/68/EEC).
The CE mark indicates that this product complies with the European
requirements for safety, health, environmental and customer protection.
1.7 Warranty
All Texecom products are designed for reliable, trouble-free operation.
Quality is carefully monitored by extensive computerised testing. As a result
the Premier RKP8/16 Plus is covered by a two year warranty against defects
in material or workmanship (details on request).
As the Premier RKP8/16 Plus is not a complete alarm system but only a part
thereof, Texecom cannot accept responsibility or liability for any damages
whatsoever based on a claim that the Premier RKP8/16 Plus failed to function
correctly. Due to our policy of continuous improvement Texecom reserve the
right to change specification without prior notice.
INS181-2