Paradox K32LCD Troubleshooting guide

K32L-EQ03 12/2010
K32LCD/K32LX LCD Keypad
Quick Start
How to Arm
NOTE: To arm with StayD enabled, refer to the StayD
User Manual, available at paradox.com>StayD. To learn
more about StayD, contact your installer.
Arming When Exiting (Regular Arm)
To arm your system when exiting:
Arming When Staying (Stay/Sleep Arm)
To arm your system when staying:
Overview
K32LX shown
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
Backlight settings
(press and hold)
Chime programming
(press and hold)
Quick menu programming
(press once + [MASTER CODE])
AC light (ON = power ON;
OFF = power OFF)
StayD light (ON = StayD ON; OFF
= StayD OFF)
RX/TX logo (K32LX only)
Step Description
1. Close all zones in desired partition.
2. Press [ARM]and enter your [ACCESS CODE].
Step Description
1. Press [STAY]for Stay arming or [SLEEP]for
Sleep arming, and enter your [ACCESS CODE].
2. Select the desired partition (1or 2). For both,
press one, than the other after the beep.

Printed in Canada
PARADOX.COM
How to Disarm
To disarm your system when entering:
Panic Keys
To send a silent or audible alarm to your security
company, press and hold one of the key combinations
listed below, for two seconds.
Alarm Memory Display
To view the alarms that occurred during the last armed
period:
Trouble Display
The LCD screen will display all troubles when they occur.
To view and clear troubles:
How to Bypass Zones
When a zone is bypassed, it remains unarmed once the
corresponding area is armed. To bypass zones:
Step Description
1. Press [OFF]and enter your [ACCESS CODE].
2. Select the desired partition (1or 2). For both,
press one, than the other after the beep.
Panic Alarm Key Combination
Police [1] & [3]
Medical [4] & [6]
Fire [7] & [9]
Step Description
1. Disarm the system.
2. Press [MEM]. All zones that were breached
during the last armed period will be
displayed. Use the arrow keys to view zones.
3. Press [ENTER]to save and exit.
Step Description
1. Press [TBL].
2. Scroll through the list of troubles using the
arrow keys. Refer to the MGSP User Guide for
trouble descriptions and instructions.
3. Perform the recommended repair instruction
to clear the trouble. If no instructions are
given, contact your security company.
4. Press [CLEAR]to exit.
Step Description
1. Press [BYP].
2. Enter your [ACCESS CODE].
3. Select the zone you want to bypass by
entering the zone number, e.g., zone 3 = 03).
4. Press [ENTER].
© 2010 Paradox Ltd. All rights reserved.
Specifications may change without prior notice.
For complete patent, trademark, certification, and warranty
information, please visit www.paradox.com.