Texsport 15042 User manual

INSTRUCTIONS
Item 15042
Folding Camp Cot
Thank you fo puchasing this Texspot folding camp cot. Please ead and undestand each step of the set-up instuctions. We
encouage you to set-up this folding camp cot at least once pio to you camping tip, ensuing that you have a satisfactoy
undestanding of the set-up pocess. We hope you enjoy you new folding camp cot and that it will give you many yeas of
camping pleasue.
Do not apply excessive
force to this product.
PARTS LIST:
A - Short End Frame Section
B - Long End Frame Section
C - Folding Cot and Frame
ABC
STEP 1 - Unfold cot.
STEP 4 - With the cot frame half
open, adjust the cot fabric so
that it is centered on the frame.
This allows the short end frame
section to attach easily.
STEP 5 - Insert the short end
section into the cot sleeve.
STEP 6 - Insert attached frame
pins into corresponding holes on
end sections to secure.
STEP 2 - Fold down leg supports
against bed section side frames.
STEP 3 - Pull frame slightly apart
and stand on legs.

STEP 7 - Loosen the velcro on the
other end of the cot. This allows
you to avoid pinched fingers
when assembling the end section
when the cot fabric is too tight.
STEP 8 - Insert the long end
section into the adjusted cot
sleeve.
STEP 9 - Insert attached frame
pins into corresponding holes on
end sections to secure. Like step
6.
STEP 10 - Stand assembled cot
on the short end section.
STEP 11 - To be comfortable the
cot fabric must be under tension.
Adjust the velcro to your liking.
STEP 12 - Enjoy!
MODEL: FOLDING CAMP COT
ITEM 15042
MADE IN CHINA
SKP10
UESTIONS:
If you should have any questions, p oblems o comments, please call ou Custome Se vice
Depa tment at 1-800-231-1402 o e-mail [email protected]. This Depa tment is open
M–F f om 8 a.m.–5 p.m. CST.