Thane Fitness AB WINNER User manual

Owner's Manual
Worldwide Patents Pending
WINNER

IMPORTANT SAFETY INSTRUCTIONS
Read ALL warning labels posted on the machine.
Read and follow the use, care and maintenance instructions
provided in this manual for safe use of your Ab WinnerTM.
Prior to using this equipment and starting an exercise program,
please consult your physician to ensure it is ok for you to
exercise using this equipment.
If at any time during the exercise you feel faint or dizzy or
experience pain, stop and consult your physician.
Keep children away from the machine. If used in the presence
of children, supervision should be provided by a third party.
Do not wear loose or dangling clothing or jewelry while using
the equip- ment.
Keep fingers away from moving parts.
Inspect machine for worn or loose components prior to each
use. Tighten or replace any loose or worn out components
prior to use. Replacement parts can be obtained by calling
your order center.
Set up the equipment on a solid and level surface.
Do not exceed the maximum weight limit of 275 lbs. Exceeding
the allow- able weight limit may result in damage to the
equipment and serious in- jury to the user.
The Ab WinnerTM has been designed for consumer use only
and should not be used in any commercial application.
1

Diagram# Part name QTY Diagram# Part name QTY
1 Center bar 1 12 Screws M8x40 2
2 Wheel set 1 13 Screw M8x50 1
3 Right support bar 1 14 Screw M6x45 1
4 Left support bar 1 15 Screw M6x10 1
5 footrest 1 16 Pin 1
6 Right arm 1 17 Nuts M8 7
7 Left arm 1 18 Nut M6 1
8 T bar 1 19 Large pad 2
9 Wrench 1 20 Small pad 2
10 Allen wrench 1 21 Carriage Bolts
M8*40
2
11 Screws M8x55 2 22 Knob 1
14
18
15
16 17 19 20
13
11 12
910
21 22
AB WINNER PARTS LIST
2

1
2
3 4
5
67
8
REMOVABLE PARTS LIST
3

ASSEMBLY INSTRUCTIONS
STEP 1
Stickers indicate the direction, (A)matches(A),insert #2
into #1, and fasten with screws 14、15、18.
4

ASSEMBLY INSTRUCTIONS
STEP 2
Stickers indicate the direction, (B)matches(B), insert
#3 and #4, and fasten with screws #12, #17 and #20.
5

ASSEMBLY INSTRUCTIONS
STEP 3
Stickers indicate the direction, (C)matches(C),pay
attention to footrest direction and set the unit upright.
Connect #5 footrest with supporting bars #3 and #4.
6

ASSEMBLY INSTRUCTIONS
STEP 4
Stickers indicate Left(L) and Right(R) directions.
Connect #8 T bar and its extension link #1 with screws
#13 and #17, and place the pin into the inside and
outside hole.
7

ASSEMBLY INSTRUCTIONS
STEP 5
Stickers indicate Left(L) and Right(R) directions.
Look at the stickers and connect bars #6 and #7, left
and right arms.
8

ASSEMBLY INSTRUCTIONS
STEP 6
To adjust the arm angle by changing the pin location.
9

ASSEMBLY INSTRUCTIONS
STEP 7
Place the knob in one of those holes according to
your needs. Make sure the knob is securely fastened
before use.
10

ASSEMBLY INSTRUCTIONS
STEP 8
Folding method and pin location.
11

WINNER
AB Winner, LLC USA, UKing Global INC
US and Internaonal Patents Pending
© 2016 AB Winner, LLC & UKing Global. All rights reserved. Distributed by UKing Global INC.