The ORGANIC GARDEN Co OGC200100RX User manual

GBCAP90 x 4
CAPS
GBP9070 x 4
POSTS
GBS40195 x 4
2M SHEETS
BRACINGKIT
GBS40095 x 4
1M SHEETS
100cm
200cm
73cm
ASSEMBLY OVERVIEW
OGC200100RX
SHEETING
PART NUMBER QTY CHECK
GBS40195 4
GBS40095 4
POSTS & CAPS
GBP9070 4
GBCAP90 4
BRACING KIT
FAST056 1
FAST055 4
DRILL2 1
195cm
95cm
Using safety gloves, unpack your carton. Check off
the parts using the packing list over the page. When
assembling, most parts should slide together with
minimal effort. Use a rubber mallet to gently tap
components into position.
Minimum 2 people required for assembly.
Any questions? Call us on 1300 109 562.
Extra High Rectangle
Raised Garden Bed
FIRST STEPS
IMPORTANT
Farm fresh food at home
OGC200100RX - 2.00m x 1.00m x 0.73m Raised Garden Bed Instruction Manual
Page1of 2
OVERLAP SHEETS
1
Overlap both sheets neatly together, as shown.
Ensure the top sheet sits over the bottom sheet by
one corrugation. Top sheet to the outside.
IMPORTANT: Do not slide the sheets one at a time
as this may cause the garden bed to bulge.
It is advisedthat youinstall your garden bed on a
even weight distribution.
Incorrect installation will void the warranty. OVERLAP
SHEETS
SCAN FOR ASSEMBLY
VIDEOS
Flip over page for continued instructions

OGC200100RX - 2.00m x 1.00m x 0.73m Raised Garden Bed Instruction Manual
Visit organicgardenco.com.au/warranty to download your warranty form or register your warranty. Page2of 2
Warranty
Raised Garden Beds are made using high quality Australian made steel, and rigid PVC components. We are
pleased to advise we warrant that the steel panels and PVC posts will not split, bend, burst or fail, and the post
to steel panel connections will retain their original structural integrity, for five years from date of purchase.
This warranty covers ORGANIC GARDEN CO. RAISED GARDEN BEDS used for normal domestic use and
installed in accordance with the installation instructions. This warranty does not cover ORGANIC GARDEN CO.
products installed in severe coastal, industrial or other highly corrosive environment. The warranty applies to the
exclusion of all other representations, guarantees or warranties express or implied, our goods come with
guarantees that cannot be excluded under the Australian consumer law and is not transferable.
You are entitled to a replacement or refund for a major failure and for compensation for any other foreseeable
loss of damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of an
acceptable quality and the failure does not amount to a major failure. For further information go to
http://consumerlaw.gov.au.
Please retain a proof of purchase (sales docket or invoice) or register your warranty within 30 days of purchase
here: https://www.organicgardenco.com.au/warranty. In the unlikely event a warranty claim is made, it must be
supported by photographic evidence and details of the defect, including component part numbers, together
with proof of purchase documentation (or on-line registration of purchase) and forwarded to the address below.
Upon receipt of the warranty claim, the Customer Service Manager will contact you within three business days to
advise you of the assessment outcome of the claim, which may include expenses incurred in making the claim.
SAFETY CAPS
3
Clip on the safety caps to each post. Use a mallet to
tap into place if necessary. Attach bracing kit to the
sheets as per step 4 instructions.
BRACINGKIT
Secure the rod to the garden bed sheets using the 4x
FAST055 nuts.
You will need to use the 6mm drill bit to drill holes into
bracing kit.
4
SLIDE SHEETS INTO POSTS
2
down into the posts.
Organic Garden Co garden beds use the SNAPTiTE
Assembly System. Ensure that the lugs in the steel
sheet click into the posts correctly, see below diagram.
Secure rod to the
sheet using the nuts
provided