The Singing Machine SML392 User manual

Compact Disc + Graphics
with Built-In Disco Light
Karaok Center
CD+Dise os con
Centro de Karaok con
Luces de Discoteca
Compact Disque + Graphiques
avec Centre de Lumi re Disco
Karaok encastre
Instruction Manual/Manual De Instrucción/Manuel D’instruction

WARNINGS
E1
HS
I
L
G
NE
E1
WARNING:TO REDUCE THE RISK OF
FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION:TO PREVENTTHERISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
OR BACK. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to alert you
to the presence of uninsulated
dangerousvoltagewithinthe
product's enclosure that might be of
sufficient magnitude to constitute a
risk of electric shock. Do not open
the product's case.
This symbol is intended to inform
you that important operating and
maintenanceinstructionsare
includ e d i n theliteratu r e
accompanying this product.
DRIPPING WARNING
VENTILATION WARNING
Warning:
SAFETY CERTIFICATION
Theproductshallnot be exposed to dripping or
splashingandthat no objectsfilledwithliquids,such
as vases,shall be placed on theproduct.
Thenormalventilation of theproductshallnot be
impededforintendeduse.
Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device is made and tested to meet safety
standards of the FCC,requirementsand
compliance with safety performance of the U.S.
Department of Health and Human Services, and
also with FDA Radiation Performance Standards
21 CFR Subchapter J.
Main plug is used as disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from the
mains completely, the main plug should be
disconnectedfromthemainsocketoutlet
completely.
Warnings:
CAUTION!
This CD player employs a laser light beam.
Onlyaqualified service person should
remove the cover or attempt to service this
device, due to possible eye injury.
Theuse of controls,adjustments, or
procedures other than those specified
herein might result in hazardous radiation
exposure.
This compact disc player is classified as a
CLASS 1 LASER product.
The CLASS1LASER PRODUCT label is
located on the rear panel.
Invisible laser radiation when open and inter
locks defeated.Avoid exposure to beam.
The apparatus shall be used in an open
area.
Since CD circuitry may cause interference to
other radio tuners nearby, switch this unit off
when not in use or move it away from the
affected radio tuner.
This device complies with part 15 of the FCC
rules, operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interferencethatmaycauseundesired
operation.
CAUTION
FCC IMPORTANT
TheCAUTIONmarking is located on therearpanel.
Class II equipment symbol
This symbol indicates that the unit
has a double insulation system.
CAN ICES-3(B)/NMB-3(B)

H
S
I
L
G
N
E
E2
WARNINGS
NOTE This digital apparatus does not exceed the ClassBlimits for radio noise emissions from digital apparatus as:
set out in the Radio Interference Regulations of Industry Canada These limits are designed to provide reasonable.
protection against harmful interference in a residential installation This equipment generates uses and can radiate,.
radio frequency energy and if not installed and used in accordance with the instructions may cause harmful,,
interference to radio communications However there is no guarantee that interference will not occur inaparticular. ,
installation If this equipment does cause harmful interference to radio or television which can be determined by(.
turning the equipment off the user is encouraged to try to correct the interference by one or more of the following),
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet onacircuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for help/ .
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do notblockanyventilationopenings.Install in accordancewiththemanufacturer's
instructions.
8. Do notinstallnearanyheatsourcessuch as radiators,heatregisters,stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do notdefeatthesafetypurpose of thepolarized or grounding-typeplug.Apolarized
plughastwobladeswithonewiderthantheother.Agroundingtypeplughastwo
bladesandathirdgroundingprong.Thewideblade or thethirdprongareprovidedfor
yoursafety. If theprovidedplugdoesnotfitintoyouroutlet,consult an electricianfor
replacement of the obsolete outlet.
10.Protectthepowercordfrombeingwalked on or pinchedparticularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.Useonlywiththecart,stand,tripod,bracket, or tablespecified by the
manufacturer, or soldwiththeapparatus.Whenacart is used,use
cautionwhenmovingthecart/apparatuscombination to avoidinjury
from tip-over.
13.Unplugthisapparatusduringlightningstorms or whenunusedforlong
periods of time.
14.Referallservicing to qualifiedservicepersonnel.Servicing is requiredwhenthe
apparatushasbeendamaged in anyway, such as power-supplycord or plug is
damaged,liquidhasbeenspilled or objectshavefallenintotheapparatus,the
apparatushasbeenexposed to rain or moisture,doesnotoperatenormally, or has
been dropped.

CONTROL LOCATIONS
E3
1. LED Display
2. CD Door
3. Master Volume Display
4. Master Volume Indicator
1.0MASTER VOLUME Control
FRONT VIEW
2 .1 PROGRAM Button
2 .2 DISCO LIGHT Slide
Button
2 .4 REPEAT LED
2 .3 PROGRAM LED
2 .5 Mic Holder
2 .6 MIC Volume Control
2 .7 ECHO Control
2 . 28 MIC Jack
2 Disco Light9.
3 .0 Loudspeaker
1 . /1 ON OFF LED
5 REPE.AT Button
6 SKI.P Button
7 PL.AY/PAUSE Button
8 SKI.P Button
9 Disco Light.
1 . /2 ON OFF Button
1 .3 PLAY/PAUSE LED
1 .4 CDG LED
1 .5 Mic Holder
1 .6 Auto Voice Control
1 .7 BALANCE Control
1 . 18 MIC Jack
1 R Button9 ANDOM.
20 STOP Button.
19
20
23
24
25
26
27
21
22
28
29
1 2 8
345 6 7
9
10
11
12
13
14
15
16
17
18
30
HSILGNE

E4
ENGLISH
31. VIDEO OUT Jack
32. AUX IN Jack
33. AUX OUT Jack (R)
34. DC Jack (DC 5.8V)
REAR VIEW
35. AUX OUT Jack (L)
31
32
33
34
35

VIDEO INPUT
(Yellow Jack)
VIDEO OUTPUT
(Yellow Jack)
REAR VIEW OF
SINGING MACHINE
VIDEO
INPUT AUDIO INPUT
R L
REAR VIEW OF TV
MAKING THE CONNECTIONS
CONNECTING POWER
SELECTING YOUR SINGING MACHINEAS YOUR SOURCE/INPUT
unit. You can power the system from a standard AC outlet by using
the supplied Power Adapter (The adapter operates on
.
Your Singing Machine is designed to connect to your TV the same way you would connect most video
cameras, DVD players or video game consoles.
We have provided RCA cables to connect your unit to a TV, DVD player, video device or an external
audio/sound system. The RCA cables have three connections at each end (white and red are for left and
right audio connections and the yellow is for video connection).
Please follow the steps below to display CD+G lyrics on the TV screen:
(1) Locate the multi-colored patch cables
(2) Connect video cable (yellow) to the video out of the back of the Singing Machine
(3) Connect the other end of the video cable (yellow) to the video input on your TV or DVD
Player.
Selecting your Singing Machine as a source/input on your TV is very similar to connecting a DVD player
or Satellite system.
We’ve listed below the most common ways of selecting the source from your TV or DVD Player:
(1) In the set up menu of the TV or DVD player there may be an option for “Input Select” where
you can choose between “Cable/Ant., Video 1, Video 2, etc.” as the input source.
(2) Look for a TV channel between the highest and lowest on your TV or DVD player (i.e. AUX,
EXT, LINE 1 or LINE IN)
(3) Your remote control for either your TV or DVD player may have source input selections as
well as detailed below:
“VIDEO, VIDEO 1, GAME, AUX, EXT or LINE-IN.“ Choosing one of those in most cases should
display the lyrics from your Singing Machine as well.
AC 100V
240V/50Hz-60Hz )
-
CAUTION: -The included AC adaptor is for use with this unit only Do not
use it with other equipment
When theadaptor is plugged in theapparatus is not completely
disconnected from the main even when the power is turned off
.
.
,-
.,
CONNECTING TO YOUR TV OR DVD PLAYER
E5
ENGLISH

AUDIO CONNECTION
Please follow the steps below to connect the unit to your TV or home stereo system:
(1) Locate the multicolored patch cords.
(2)Connect audio xcables (White and Red) to the Audio Out ( White-Left and Red-Right) of the back of
the Singing Machine.
(3) Connect the other end of the audio cables to the audio/auxiliary input on your TV or home
stereo system.
MAKING THE CONNECTIONS
E6
Home Stereo System
AUX OUTPUT
R
(Red Jack)
REAR VIEW OF
SINGING MACHINE
VIDEO
INPUT AUDIO
INPUT
R L
REAR VIEW OF TV
OR HOME STEREO SYSTEM
AUX OUTPUT
L
(White Jack)
AUX INPUT
R
(Red Jack)
AUX INPUT
L
(White Jack)
ENGLISH

E7
This unit is designed to play CDs and CD+Gs bearing the identification logo . If the disc does not
conform to the standard, it may not play properly.
respectively
To turn on the unit, press the ON/OFF button, the ON/OFF LED Indicator will light up.
To turn it off, press the ON/OFF button again, the ON/OFF LED Indicator will turn off.
Open the CD door, placeaCD or CD+G disc in the compartment with the printed side facing upward and
the shiny side facing down.
Gently close the CD door. The unit will start to play the first track automatically. (If no disc is loaded, it will
display “ ”. IfaCDG is loaded, the CDG indicator will light up.)
Adjust MASTER VOLUME control on your unit, TV or audio system toacomfortable level.
To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE LED will be lit.
To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED Indicator will flash.
To resume play, press this button again.
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total number of tracks
will be shown on the LED window.)
Rotate to the MASTER VOLUME control to obtain the desired sound level.
During STOP mode you can skip forward or back to your desired track number by pressing
SKIP buttons - SKIP -
To resume playing the selected song press PLAY PAUSE button
When playing any audio CD, press and hold the SKIP button ( -SKIP- ). The CD will search at high
speed in the forward or backward direction. Normal play will continue when you release the button.
To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will start to flash.
To repeat all tracks, press the REPEAT button twice. The REPEAT LED will light up and stay lit. Press the
PLAY/PAUSE button to begin.
To clear the REPEAT function, press the REPEAT button again. The REPEAT LED will turn off.
TURNING POWER ON/OFF
LOADINGADISC
PLAY/PAUSE
STOP
MASTER VOLUME
SKIP (For both CD and CDG discs)
SEARCH (For audio CD disc only)
REPEAT
Note:
(Refer to the Trouble Shooting Guide ifadisc is loaded but the total tracks do not appear.)
Note:
Note: The MIC Volume must be adjusted simultaneously with the master volume level.
- Never place anything except a compact disc in the disc tray. Foreign objects can damage the unit.
- Only place one disc on the disc tray atatime.
- Pressing pause repeatedly whenaCD+G is playing may cause distorted lyrics on your TV screen. Any distortion will
remain on the TV screen until it is refreshed either during an instrumental break or the song is stopped and/or the
song is started from the beginning.
,
( ).
, / .
the
CD OR CD+G OPERATION
HS
I
L
G
NE

E8
H
S
I
L
G
N
E
CD OR CD+G OPERATION
PROGRAM
Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM button until the
PROGRAM LED flashes, the track will read [ ].
Step 2: Press the SKIP buttons ( - SKIP - ) to selectadesired track.
Step 3: Press PROGRAM button to confirm entry. You can repeat the same steps up toamaximum of 20
tracks.
Step 4: Press PLAY button when you have completed programming and you are ready to start singing.
Press the STOP button to clear all the programmed entries.
RANDOM
DISCO LIGHT OPERATION
KARAOKE FUNCTIONS
MASTER VOLUME
During STOP mode, press the RANDOM button a to s
During playback, press the RANDOM button to activate the random play function and it will be started
after the current track.
Press the STOP button to clear the random function.
To illuminate the disco light and get your desired lighting effect, slide the Disco Light slide button from the
OFF position to your desired level.
Sing along with the music by plugging in the provided microphone into either one of the microphone jacks on
the unit.
Adjust the MIC VOLUME control toadesired level and obtain the best performance.
Your Singing Machine is designed to connect your favorite Digital Music device (e.g. iPod/MP3 player, etc.)
.(elbacetairporppanagnisuybecivedruoytcennocnacuoY
Rotate to the MASTER VOLUME control to obtain the desired sound level.
nd PLAY button tart the random play function.
Warning-Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist
the urge to swing the microphone around by the cord!
Warning -
MIC VOLUME
ECHO
BALANCE
AUTO VOICE CONTROL
To avoid Microphone feedback please avoid being too close to the speaker.
Warning-To avoid the over-burst amplified volume output or possible over-tuned sound crack,
you are recommended to adjust the Digital Music device volume to one third or lower at the
beginning.
Adjust the ECHO control to enhance your voice foraconcert hall effect.
Adjust the BALANCE control between the prerecorded singer’s voice and the music when using a multiplex karaoke disc.
(Please see Glossary of term to learn more about multiplex on our website.)
AUTO VOICE CONTROL can be activated by rotating the Auto Voice Control. The vocals on the multiplex recording will be
muted when the singer starts to sing through the microphone. When the singer stops to sing, the vocals will resume to
normal.
3.5mm audio cable not included)
AUX IN function can always be switched ON once the audio cable is plugged.
Note: Monitor will be turned off when the audio cable is plugged.
AUX IN OPERATION

TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
E9
SOLUTION
Insert the power plug into the AC
outlet.
Turn up the volume.
Turn up the volume at TV/PA
system.
Turn on the power at TV/PAsystem.
Followdirections‘Audio
Connection’page.
PROBLEM
No power when
POWER is on.
No sound.
POSSIBLE CAUSE
No power plug connection at
theAC outlet.
Volumecontrol is set to
minimum.
Volume control on TV set/PA
system is set to minimum.
TV set/PA system power is
OFF.
AUX O U T j ack s n o t
connected.
Check the outlet with a working
lamp or other electrical appliance.
No power when plugged
in.
The AC outlet may not have
power.
Insert disc correctly.
Wipe clean with soft cloth.
Use a new disc.
Use a new disc.
Only use discs bearing standard
logo.
Disc is inserted upside down.
Disc is dirty.
Disc is scratched.
Disc is warped.
Anonstandarddisc is
inserted.
Moisture has formed inside
the CD deck.
CD PLAYER
Cannot work normally or
“ ”, “ ”
displayed.
, or “ ” areaai aa aaa
Wait about 20 to 30 minutes to let it
dry out.
Singing Machine needs to be
reset.
Disconnect the machinefrom
power source for 30 seconds.
Lens is dirty. Use a CD lens cleaner.
HS
I
L
G
NE