THE WORLD MODELS Aure EP User manual

Wing Span
Wing Area
Flying Weight
Fuselage Length
79 in / 2010 mm
576 sq in / 37.2 sq dm
48 oz / 1350 g
48 in / 1220 mm
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF)SERIES
MADE IN CHINA
* Specifications are subject to change without notice.*
Warning ! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of electric powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
INSTRUCTION MANUAL
Specifications
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
Requires : 4 - channel radio w/ 2 micro servos
(2.5 kg cm torque) for ailerons & 2 standard servos,
Outrunner Motor KM0283010
w/ Propeller Adaptor HW2340100,
20A brushless ESC, 3 cells 11.1V
2100 mAh Li - Po battery & charger.
Aure EP
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmod e l s .com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m ode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com

INDEX
BEFORE YOU BEGIN
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P.1
P.2
P.3-P.8
P.8
Check all parts. If you find any defective or missing parts contact your local dealer. Please
DRY FIT and check for defects for all parts that will require CA or Epoxy for final assembly.
Any parts you find to be defective after the gluing process may be difficult to remove for
warranty replacement. The manufacturer will replace any defective parts, but will not extend
to the parts that are good before gluing to defective parts during assembly. Warranty will
not cover any parts modified by customer.
Symbols used throughout this instruction manual comprise of the following :-
Read through the manual before you begin, so you will have an overall idea of what to do.
1
2
3
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A.glue, super glue.)
Assemble left and right
sides the same way.
Peel off shaded portion
covering film.
Pay close attention here!
Apply epoxy glue.
Must be purchased separately !
Drill holes with the specified
diameter (here: 3mm).
Pierce the shaded portion
covering film.
3mm
Do not overlook this symbol !
Warning!
Apply thread locker
P.1
Aure EP
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m o d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com

Parts List
P.2
COVERING:--
LIGHTEX SGX 100 WHITE
LIGHTEX SGX 251 SKY BLUE
LIGHTEX SGX 351 DARK BLUE
1. MAIN WING -- 1 pair
2. BALSA 3x52x64mm (For Aileron Servos) -- 1 pair
BALSA 7x8x13mm (For Aileron Servos) -- 4 pcs
SCREW PWA2x8mm -- 8 pcs
SCREW PB2x10mm -- 4 pcs
HORN PL4113101 -- 2 sets
PUSHROD Ø1.8x55mm w/ Threads (For Aileron Servos) -- 2 pcs
STRAPER PL4112102 -- 2 pcs
CLEVIS PL4112103 -- 2 pcs
FUEL TUBE d2.5xD6x5mm -- 4 pcs
3. WING JONER (A) Ø6x211mm (wire) -- 1 pc.
WING JONER (B) Ø4x142mm (wire) -- 1 pc.
4. FUSELAGE -- 1 pc.
RUDDER -- 1 pc.
5. SCREW PB2x30mm -- 2 pcs
PUSHROD Ø1.8x840mm w/ Threads (For Rudder Servo) -- 1 pc.
HORN PL4113101 -- 1 pc.
CLEVIS PL4112103 -- 1 pc.
FUEL TUBE d2.5xD6x5mm -- 1 pc.
6. LINKAGE CONNECTOR HW7111050 D2.1x5mm -- 1 set
7. STABILIZER & ELEVATOR -- 1 set
STABILIZER TUBE (A) Ø3x144mm -- 1 pc.
STABILIZER TUBE (B) Ø3x127mm -- 1 pc.
NYLON WASHER d3.1xD11x0.7mm -- 2 pcs
8. SCREW PM3x6mm -- 4 pcs
WASHER d3xD7mm -- 4 pcs
SPINNER Ø36mm -- 1 set
FOLDING PROPELLER SET (PL6314020) -- 1 set
9. FUEL TUBE d2.5xD6x5mm -- 1 pc.
SPONGE 10x50x150mm (For Radio Equipment & Battery) -- 2 pcs
BATTERY TIE 180mm -- 1 pc.
CLEVIS PL4112105 -- 1 pc.
DOUBLE SIDED TAPE 30x35mm -- 1 pc.
10. SOCKET HEAD SCREW HM3x16mm -- 2 pcs
WASHER d3xD12mm -- 2 pcs
PLATE 1.5x29.5x71mm -- 1 pc.
11. COCKPIT -- 1 set
12. DECALS E104SXMDEC -- 1 set
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmod e l s .com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com

P.3
Bottom View
Bottom View
Bottom View
Aileron Servo Lead
Aileron Servo Lead
Wing Joner (A)
Ø6x211mm (Wire)
Wing Joner (B)
Ø4x142mm (Wire)
Completed
Ø1mm pilot holes for
World Models tri-horn
are pre-drilled.Please
look for pin-hole marks
at under side of control
surfaces.
Apply instant type CA glue to both sides of each hinge.
PWA2x8mm Screw
PWA2x8mm
PB2x10mm Screw
PB2x10mm
1Aileron
Aileron Servo
2
3Main Wing
Fuel Tube
d2.5xD6x5mm
Fuel Tube
d2.5xD6x5mm
Pushrod
Ø1.8x55mm
Pushrod
Ø1.8x55mm
Clevis
Horn
Straper
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworld m odels.com

P.4
5Rudder Pushrod
Rudder
4
Completed
C=C’
C C’
6Servo Set
Apply instant type CA glue to both sides of each
hinge.
PB2x30mm Screw
PB2x30mm
Ø1mm pilot holes for World Models tri-horn
are pre-drilled.Please look for pin-hole
marks at under side of control surfaces.
Pushrod
1.8x840mm
Clevis
Fuel Tube
Ø2.5xD6x5mm
3 x 3mm Set Screw
3 x 3mm Set Screw
Linkage Connector
M2 Nut
M2 Nut
2mm Washer
2mm
Washer
2mm
Washer
Rudder pushwire
Rudder Servo.
Please refer to the attached sheet for linkage connector installation.
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com

P.5
Stabilizer & Elevator7
8Outrunner Motor
Temporary install the main wing, adjust leveling of
the stabilizer to make it as parallel to the main wing
as possible.
Bottom View
Bottom View
Bottom View Completed
Bottom View
Nylon Washer
d3.1xD11x0.7mm
Stabilizer Tube (B)
Ø3x127mm
Stabilizer Tube (A)
Ø3x144mm
3mm
Set Screw
PM2x12mm Screw PM2x12mm
PM2x12mm
PA2.6x8mm Screw
PM3x6mm Screw
d3xD7mm Washer
PM3x6mm
Washer
d3xD7mm
Don't over-tighten the PM2
screws, let the propeller
blades align themselves
when spinning.
Completed
PA2.6x8mm
Spinner
Ø36mm
Outrunner Motor
Brushless ESC
TWM KC202SA02A
TWM
KP0011310
M5 Nut M5 Nut
TWM HW3111400
PROPELLER ADAPTOR WRENCH
TWM
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworld m odels.com

P.6
10 Main Wing
Radio Equipment
9
11 Cockpit
Cockpit Completed
Completed
Receiver
Battery
Battery
Fuel Tube
d2.5xD6x5mm
Rudder Pushrod
Linkage Connector Clevis
Sponge
Sponge
Rudder Servo
Elevator Servo
Brushless ESC
Double Sided Tape
Elevator Pushrod
Battery Tie
180mm
Front Front
HM3x16mm Socket Head Screw
d3xD12mm Washer
HM3x16mm
Socket Head Screw
Plate 1.5x29.5x71mm
Washer
d3xD12mm
Plate
1.5x29.5x71mm
Washer
d3xD12mm
HM3x16mm
Socket Head Screw
lock
unlock
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.theworld m odels.com

Adjust the wing and fuselage configuration as shown
in the diagrams.
12 Wing Setting
P.7
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com

# First time flyer should never fly by himself / herself. Assistance from experienced flyer is absolutely
necessary.
# Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly pre-adjusted aircraft.
# is specially designed to be powered by KM0283010 Outrunner Motor.
# Make sure the air field is spacious, never fly the plane too close to people and never get too close to a
running propeller. Extreme caution should be exercised when working with electric powered models.
Make sure the propeller is cleared of all objects, especially your hands before connecting the battery to
the model. Make sure you understand the operation of the ESC (Electronic Speed Control) by studying
the ESC manual. Once you plug in the battery for electric powered model, always treat the propeller as
a rotating one, as accidental movement of the throttle stick will spin the propeller and could cause
injuries.
# If you find wrinkles on the covering as a result of weather changes, you can use hot iron to remove the
wrinkles. Please begin with lower temperature setting and gradually raise the temperature until the
wrinkles are gone. Too hot an iron may damage the covering. Don't use hot iron near the seams or
edges, hot iron will melt the glue and shrink the covering at the same time, causing the seams to pull
away.
# Check and re-tighten up all factory assembled screws, use thread locker if necessary.
C.G.
14
13 Control Throws
P.8
Elevator
R udder
A i lero n
20mm
20mm
53mm
53mm
15mm
15mm
Adjust the control throws as shown in the diagram.
These throws are good for general flying. You can
adjust according to your personal preference.
The ideal C.G. position is 75mm(2.95 in.) behind the
leading edge measured at where the wing meets the
fuselage. In order to obtain the C.G. specified, add
weight to the fuselage or move the battery position.
Check the C.G. Before flying.
75mm
2.95 in.
Important Safety Precautions
Au re EP
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmodels.com
The World Models
Manufacturing Co., Ltd.
www.theworld m odels.com

Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
AirBorne Models, 4749-K, Bennett Drive, Livermore, CA 94551 USA.
1. Name:______________________________________________
2. Address:____________________________________________
3. Phone #:____________________ E-mail:__________________
4. Model:______________________________________________
Wing QC#__________ Fuselage QC# _______________________
(QC numbers are stamped on wing and fuselage)
5. Date of Purchase:_____________________________________
6. Store Name: _________________________________________
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
Drill 2mm hole at servo horn.
Insert linkage connector
into servo horn.
Make sure shoulder of
screw is cleared from
servo horn.
Add washer to reduce
play if necessary.
Shoulder
Tighten up the round nut
against the shoulder. Apply
CA or permanent thread
locker.
After fastening the round nut, make sure that
the linkage connector can rotate freely.
LINKAGE CONNECTOR
HW7111050 & HW7111060
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com

Optional Parts
( ACCESSORIES)
Code No. Size Package
Clevis Wrench
PL8210010 1 set
Special tool for clevis installation. Suitable for
standard and small (EP) clevis.
Small
Clevis
Large
Clevis
-ideal for electric models
2 - Pin EZ Connector
Code No. Size Package
KP0011210 40A Max. Current 1 set
HW3111400
Propeller Adaptor Wrench
Code No. Size Package
HW3111400 1 pc
- Voltage Range : 5.6 ~ 16.8V
- Current : 25A continuous
- Current (Burst, <10 seconds): 35A
- Weight : 24 g
(with wires and connector )
- BEC : 5V / 2A
- Low Voltage Cut-off : /
- Light weight with low internal resistance
for high current operation
- BEC function for Li-ion / Li-poly
2 – 4 cells; Nimh / Nicd 5 – 12 cells operation.
- Low battery voltage auto cut off to reserve power to the servos.
- Safe start up motor.
Brushless ESC
Code No. Size Package
KC2025A02A 24x45x11mm 1 pc
Code No. Size Package
Propeller Adaptor
HW2340100 d3xD5 1 set
-ideal for electric models
3 - Pin EZ Connector
Code No. Size Package
KP0011310 40A Max. Current 1 set
Code No. Package
-Max speed: 12000 rpm
-Kv (rpm/V): 1015
-Operating Power: 180W
-Operating Voltage: 6-12V
-Operating Current: 15A
-Peak Current: 20A (max. 15 sec.)
-Internal Resistance: 95 m ohms
-Diameter: 28mm
-Length: 30mm
-Weight: 60g
-Shaft Diameter: 3mm
-Shaft Length: 14.8 mm
-Mounting Screw: M3
-Distance of Mounting Holes:
Front (16mm and 19mm)
Outrunner 28/ 30
KM0283010 1 pc
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com

The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
E104SXMPO26391105
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.thew o rldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworld m od e l s .com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmode l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldm o dels.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
www.theworldmo d e l s.com
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
www.the w orldmo d els.com
The World Models
Manufacturing Co., Ltd.
www.theworldmod e ls.com
The World Models
Manufacturing Co., Ltd.
w w w.the w orldmodels.co m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
The World Models
Manufacturing Co., Ltd.
w w w.theworldmo d els.com
The World Models
Manufacturing Co., Ltd.
w w w.thewo r ldmod e ls.com
The World Models
Manufacturing Co., Ltd.
ww w .theworld m odels.com