Theben AT-1 Hybrid User manual

1
Car Charging/Heating Timer BLE
0360890, 0360891
307465
2020-12-04
AT-1 Hybrid
EN
1. General information
•The Car Heating Timer BLE is a socket outlet timer
(illuminated) with daily program.
•Can be operated manually or with smartphone via Blue-
tooth (with the AT-1 Hybrid app).
•Integrated auto-charging function.
2. Safety
Assembly and installation should only be carried
out by a qualied electrician, somebody who has
completed appropriate professional training and
has the knowledge and experience necessary to be
able to recognise and avoid the potential dangers
posed by electricity.
Before installation/disassembly, disconnect the
power supply and ensure that the parts are no
longer live.
Prior to commissioning and using the product,
read and observe all the operating instructions.
3. Proper use
•The timer may only be installed in the "Car Heating Box"
(see gure above).
•It controls a socket outlet for charging/heating electric
car heaters. The user sets the departure time, and the
timer switches the heating on 2–4 hours (depending on
mode) before the start.
•The timer can also be used to recharge the car.
•There is the option of using an external temperature
sensor 9070508 to control the preheating time, depen-
ding on the outside temperature.
4. Connection
!During installation, it must be ensured that the phase is
wired at the right contact.
!When connecting the external temperature sensor, dis-
connect the timer from the power supply.
5. Settings






Set departure time with buttons + or - (the times are
automatically saved)
Set mode: 2 or 4 hours heating or car charging
Display of activated mode for departure time, charging
time (2 h, 4 h, , if car charge mode is activated)
Display for departure time (default), charging time or time
of day
Setting/querying the time
External temperature sensor (9070508, optional) can be
connected
6. Manual operation
Set/change time
Press button > 3 s.
Use the + and – ()buttons to set or change the current
time (after 5 s the time is automatically saved). A longer
press starts the fast mode.
Display time
Press button  briey.
▻The time appears on the display .
Press button or again.
▻The time display ends and the departure time is
displayed.
Set departure time
Set the departure time with the + and – buttons.

2
Set mode
Press button .
Each further button press switches the mode from 2 h,
to 4 h etc.
▻The LED at 2 h, 4 h, lights up .
Save mode
Release button .
LWith temperature sensor (9070508) connected, the
switch-on time of the heating period is automatically
calculated based on the outdoor temperature.
Temperature Mode 2 h Mode 4 h
> + 5 °C 0 hour 0 hour
+ 5 … 0 °C 0.5 hour 1 hour
< 0 … – 5 °C 1 hour 2 hours
< – 5 … – 10 °C 1.5 hours 3 hours
< – 10 °C 2 hours 4 hours
Set mode "Charge car"
Press button repeatedly until the function lights up
on the display . The charging time starts with On 8 h;
the remaining charging time is displayed with On 3 h, for
example. Charging time nished: Off
Press button again.
▻The charging time starts again at On 8 h.
Set mode "Charge car" individually
Use the + and – buttons to set the desired charging time.
Reset
Press buttons and simultaneously.
▻The device is reset; departure time and energy con-
sumption for 7/28 days are retained. Afterwards, the
time must be entered again.
7. Operation using the app
Connect timer and smartphone (via app)
LThe time is synchronized when connected to the app.
The timer can be operated with an app (for Android from
version 6.0, for iOS from version 12.0) via mobile devices.
Communication is via Bluetooth.
Download the AT-1 Hybrid app from the App Store or
Google Play Store.
Open the app.
Scan code on timer
LCamera must be activated.
Selected timers (max. 8) (favourite)
LLocked user must be activated in the
"Setting" menu. If Locked user is not
selected, the last timer for the heating
or charging time is displayed when a
data record has been transferred.
Search for new device
LBluetooth must be activated.
Settings: language (EN, FI, SV)
Software info
The connection can be made in 2 ways:
1. Connection by scanning the QR code
Scan the QR code on the timer with the smartphone.
▻The app starts and connects automatically with the
timer.
LThe light switches on automatically when it gets dark.
If this does not work
open the app and press the Scan code button.
Then scan the QR code on the timer.
2. Manual connection
Press the Connect manually button in the app and then
press the buttons and +on the timer simultaneously.
▻The app displays the timer with the last 4 digits of the
serial number. These digits also appear on the display
of the timer and can be checked with the smartphone.
Conrm pairing in the app.
▻The hand icon appears if the timer has been activated
for connecting.
When searching, the timers are
displayed according to their trans-
mission strength.

3
The main functions
Program
Set departure time
Enter/change the name of
the device/parking space
Send settings to timer
Program
– Preheating time 2 h or 4 h
– Activate car charging time
(for all hybrid and
e-vehicles)
Display of energy consumption
Display energy consumption (± 10 %)
Data for 1 day, 7 days, 28 days
(indicated in kWh and price/kWh)
retrieve current data
Setting and FAQ
FAQ
Operating instructions on the
Internet
Favourite ▻ only appears if
Locked user is activated
Setting
– Locked user (for private
use)
– Factory setting
Send factory setting
LTime and all energy consump-
tions are deleted
Normal mode and „Locked user mode“
In normal mode, the device identiers are not stored and
the ownership rights can be taken over by third parties, for
example if one user has left the parking space and a second
wants to use it.
Remote connections in normal mode are maintained until one
of the following conditions occurs:
•Mode 2 h elapsed +2 h
•Mode 4 h elapsed +2 h
•Mode "Charge car" > 1 h of heating time
•if the manual connection is made by a person using a
scan or the button combination.
•if the +/– buttons and the Mode button are used to
change the reservation manually.
▻ For further operation, the timer must be reconnected.
In "Locked user mode", i.e. Locked user must be activated in
menu ▻ Settings,
the device identiers will be saved. The devices can be ope-
rated via the favourites on the start page without new pairing
(favourite = yellow star).
8. Technical data
Operating voltage: 230 V AC
Frequency: 50 Hz
Standby: 0.4 W
Switching capacity: 16 A (at 230 V AC, cos ϕ = 1), 3680 W
Switching capacity: 2 A (at 230 V AC, cos ϕ= 0.6)
Protection rating: IP 20 in accordance with EN 60529
Protection class: I in accordance with EN 60730-1
subject to designated installation
Operating temperature: –40 °C … +50 °C
Type of contact: NO contact
Switching accuracy: to the second
Power reserve: 4 h
Time accuracy: synchronised with mains
Mode of operation: Type 1 BSTU
Rated impulse voltage: 4 kV
Pollution degree: 2
Software: Class A
Range: 15 m on open air test site
Transmission frequency: 2400 MHz
Transmission power: 2.5 mW; class 2
Theben AG herewith declares that this type of radio installation
complies with Directive 2014/53/EU. The complete text of the
EU Declaration of Conformity is available at the following Internet
address:
www.theben.de/red-konformitaet
Cleaning and service
Only use a dry, soft cloth to clean the device surface.
Do not use any cleaning agents or solvents.
Disposal
Dispose of device in environmentally sound manner
(electronic waste)
9. Contact
Theben Oy
Liikkalankuja 6
00950 Helsinki
FINLAND
Phone: [phone]
E-mail: info@theben.