Theben TR 608 top User manual

TERMINA
REG 1 TE
1-channel 7 day timer
Safety
Safety
Information
Information
The connection and installation of electrical
appliances must be performed by a skilled
electrician only. Any intervention into or
modifications to the appliance shall lead to
the lapse of all warranty rights. Comply with
your national regulations and all relevant
safety stipulations.
310 967 02
Current days of
the week
1 =Monday,
2 =Tuesday, ...
The decision Yes con-
firms the selection or
programming
Decision No means
continue ...
Channel statuses
ON =
OFF =
Service voltage OK
Two flashing dots
Power reserve mode
Three flashing dots
Selection
e.g.: Prog, nMan
Abort input
DGB FNL I E P
TR 608 top
L1
L2
N
1
23
LN

1
Menu
+
-
ok
Res
7
42 356
n
M
Man
Prog
Load

Res
Menue
+
-
Ok
OK
According to
version
According to
version
3.
info
info
1. info action
+
OK
2.
Res
Menu
+
-
Ok
Fir
First contact st contact
Selection of the national language
Initial operation
RESET (only in case of emergency): If you perform a RESET of the timer, the individual settings will be deleted. The programmes switching times remain
intact. Press the RES key with and a pointed object for approx. 1 second.
According
to version
According
to version
The decision Yes, confirms the
selection or programming.
The decision No, means
continue.
Set or amend by pressing the
or keys.
For programming, viewing or deleting
First of all read the text display.
Menu selection
Select by pressing the Prog key.
Confirm by pressing .
By pressing the key select the desired menu.
e.g. New, View or Delete.
Confirm your selection by pressing .
Set or change: by pressing or .
Store by pressing .
To display the switching times:
In the menu View, press the key several times.
For initial operation, the battery must be installed. In
order to boost the power reserve, the display will shut
off after 15 minutes in battery mode.
Activate the clock,
select the national language
By pressing the or key select your national lan-
guage.
Store your selection by pressing the key.
Repeat the above steps for setting the month, day, hour
and minute. Press the
key to call the programming and prompting pro-
grams. The displayed texts prompt you to make a decis
ion.
• A replaceable lithium cell (CR 2032) is included in
the package.
• The stored data are retained and are available after the
return of mains power or by pressing a button (display
active).
• The lithium cell may be replaced only when the device
is isolated from the power supply system.
• The timer has not been preset with a date and time.
• Battery status display: If the LCD display is blin-
king, the device only has a power reserve of approx. 3
weeks in the case of a power failure.

Prog Prog
Menu MenuMenu
ManProg
OK OK OK
+
+
+-
-
-
Man Man
OK OK OK
OK
OK
OK
800VA
1000W
7x7 W
6x11W
5x15W
5x20W
5x23W
TR 608 0 xxx
230V~ +/- 10% 50-60 Hz
240V~ +6%-14% 50-60 Hz
AgSnO
1000W
200 VA (18µF)
2
16 (4) A 250 V ~
min. 100 mA
24 V AC/DC
T
Technical Data echnical Data
Degree of
protection
II EN 60355-1
IP 20 EN 60529
28 memory
locations
Type 1 BSTU
IEC/EN 60730-2-7

Prog
Menue
OK
OK
info
info
info
info
action
action
OK
+
-
OKOK
++
--
OKOK OK OK +OK + + OK
1 234567
Pr
Progr ogramming the switching time amming the switching time
Switching times for lighting systems, machines,
ventilation systems, alarm systems etc.
Formation of day groups
If the same switching times are active
on several days of the week, they occu-
py just one memory location, e.g.
Monday – Friday 7.30 hrs ON.
28 memory locations are available.
Group formation
In answer to the text question Copy,
decide by pressing the key that
the day program should be copied to
another day of the week.
When programming an ON and OFF
switching time, e.g. Monday 9 AM, a
switch-off at 9 AM always has priority.
Program review
Following programming the timer
makes a program review back to
midnight and then sets the correct
switching status.
Example: Switching on the lighting of a sports hall
on Mon., Tues., Thurs., Fri. from 7.30h until 12h.
Programming example
Select Prog by pressing the key.
Store your selection by pressing the key.
Select New by pressing the or .
Store your selection by pressing the key.
Select ON by pressing or .
Store your selection by pressing .
Set the hours and minutes by pressing the
or key.
Store selection by pressing .
To store this day of the week only
Select weekday by pressing or .
Select store by pressing .
Store by pressing
To copy to other days of the week
Store COPY by pressing .
Select weekday by pressing or .
Store by pressing
To leave out a day of the week, skip by pressing
the key.
Finally select the STORE display by pressing .
Store your selection by pressing .
Example
Example

OK OK
OK
MENU
Prog
OK
OK
OK
OK
+
-
Res
Menu
+
-
ok
Override
Override
P
Permanent ON or OFF ermanent ON or OFF
Via the automatic menu Auto only
Individual deletions
Press the two keys for approx. 1 s.
(switches alternately or ).
Symbol appears.
Manual preselection is corrected again
by the stored program.
Cancellation of manual
preselection/ permanent switching:
Briefly press the keys shown above.
Permanent ON or OFF
Press both keys for approx. 2 s.
Symbol appears.
Press both keys for approx. 2 s.
Symbol appears.
Cancellation of manual
preselection/ permanent switching:
Briefly press the keys shown above.
Man

Setting/
Setting/ corr correcting the date and time ecting the date and time
summer/winter time
summer/winter time
Automatic summer/winter time
correction
According to version the timer is pre-
programmed ex-works complete with
the changeover. Should you switch off
the automatic facility or wish to alter
it, first of all read the text display.
Select by pressing or .
Store by pressing .
Read the text display first
of all.
Select by pressing the key
or key.
Store by pressing the key.
Summer / Winter time set-
ting has already been pro-
grammed:
The timer has already been pro-
grammed with the summer and
winter time ex works.
Summer / Winter time rule
is freely programmable:
To this end you have to enter a
month and week, e.g.:
Month 3 = march
Week 4 = 4th week of the month
Week 5 = last week of the month

Man
-
 TIMEGUARD LTD., Victory Park, 400 Edgware Road,
London NW2 6ND
Tel. [phone], Fax [phone]
PETER WARBURTON PTY. LIMITED, 64 Brittania Road, Castle Hill
NSW 2154, Australia, Tel.: [phone], Fax: [phone]
PIN code
PIN code
The device can be locked against unauthorized use
with a 4 digit code number.
Select the Manual menu using oder .
Confirm with the button.
Selection WITH PIN
Select WITH PIN using oder .
Confirm with the button. Make note of any
desired 4-digits number.
Select the first digit of your 4 digit code using
.
Confirm the entered digit with .
Select further digits as described using oder .
Confirm each selected digit with the button.
The device is locked 90 sec. after the last keystro-
ke and can only be operated after the correct PIN
code is entered.
Selection WITHOUT PIN
Select WITHOUT PIN using oder .
Confirm with the button.
PIN
PIN
If a PIN code has been activated, the timer can no
longer be activated without a valid PIN code after a
RESET.
The device must be sent in!