Theben termina tr 611 top2 User manual

1
TR 611 top2 24 V
6114100
TR 622 top2 24 V
6224100
307086
Time switch
EN
1. Basic safety information
Danger of death through electric shock or fire!
 Installation should only be carried out by a
qualied electrician!
WARNING
•The device is designed for installation on DIN top hat
rails (in accordance with EN 60715)
•The device corresponds to type 1 STU in accordance with
IEC/EN 60730-2-7
•Power reserve (10 years) is reduced if memory card is
inserted (using battery power)
!OBELISK top2 memory card: Avoid mechanical overload
and contamination during storage/transportation
2. Proper use
•The time switch is used for lighting, ventilation and
ushing applications etc.
•Only for use in closed, dry rooms
!Do not use on safety devices, e.g. escape route doors, re
safety equipment etc.
!The external outputs are designed for operating voltage
of 12-24 V AC and DC and not for 230 V.
Disposal
Dispose of device in environmentally sound manner
3. Installation and connection
Mounting the time switch
Danger of death through electric shock or fire!
 Installation should only be carried out by a
qualied electrician!
WARNING
click
45° cable
Plug-in screwless
terminal
OBELISK top2
memory card
(9070404)
Test tap
Load line connection
Mount on DIN top hat rails (as dened in EN 60715)
Switched voltage-free
Ensure device cannot be switched on
Check absence of voltage
Earth and bypass
Cover or shield any adjacent live components
Connecting the cable
Wiring diagrams 6114100 /6224100
C1
123
12-24
V
+
~
–
~
Ext1
max. 100 m
+
~–
~
C2
C1
123
456
Ext1
max. 100 m max. 100 m
Ext2
12-24 V
+
~
–
~
+
~
–
~
Strip cable to 8 mm (max. 9)
Insert cable in the open DuoFix® plug-in terminal at 45°
L2 cables per terminal position possible
To open the DuoFix® plug-in terminal, press screwdriver
downwards
!TR 622: With these devices the type of low voltage must
correspond to low voltage type of the supply voltage
(SELV = SELV, PELV = PELV, FELV = FELV).

2
LIf the switch output is 230 V, the time switch can be ope-
rated using low function voltage but not SELV as supply
voltage.
Lay the control cable separately from the load power.
Disconnecting the cable
Use the screwdriver to push the load line connection
opener downwards
4. Device description
Display & buttons

06
12 18 24
MENU OK
OKMENU
Programmed
switching times
Date display
Channel status
C1, C2
ON = On OFF = Off
Time display
Days of the week
from 1 to 7
Display of the active buttons
with the relevant function
–Activate display
–Open menu
–Cancel menu
–ESC
(leave menu)
–Save
selection
– Confirm
selection

Options
are displayed
Operating instructions
YES
Confirmation
Press
OK
NO
Modify/
Change
Press
t u
1. Read text line
text/symbol represents
query
2. Make a decision
Overview of navigation menu
PROGRAM
NEW
CHECK
MODIFY
DELETE
END
TIME/DATE MANUAL
OPTIONS END
TIME
SET DATE
SU--WI
WEEK
DAY
FORM DATE
FORM TIME
END
CHANNEL C1
OPERATING
HOUR
EXT
INPUT
LCD ILLU-
MINATION
LANGUAGE
PIN
FACTORY
SETTING
INFO
END
MENU
PERM ON
PERM OFF
OVERRI ON
TIMER
HOLIDAY
RANDOM
END
u u u
u u
Initial operation
GERMAN
FRENCH
ITALIAN
DUTCH
RETAIN
PROGRAM
FORM DATE
DELETE
PROGRAM
YEAR
MENU
MONTH
DAY
FORM TIME
HOUR
MINUTE
SU-WI
EUROPE
END
u u
Set language, country, town/city, date, time as well as
summer/winter time (SU-WI)
Press any button and display follows on screen (see gure)

3
5. Settings and functions
Set switching time
same switching
time for
several days =
block
Switching
time for
one day


PROGRAM
MENU
NEW
CHECK
MODIFY
DELETE
END
SWITCH PULSE CYCLE
CHANNEL C1
MEM FREE
84
ON
HOUR
MINUTE
MONDAY
SAVE
COPY
ADD
TUESDAY
u
u
SAVE
u u u u
LA switching time always consists of a start time and an
end time
LThere are 84 memory cells available
Example: Switch on sports hall lighting from Mon–Fri, 7:30 to
12:00 hrs
Press MENU
Select PROGRAM and press OK to conrm
Select NEW and press OK to conrm
Select SWITCH, conrm by pressing OK
Select CHANNEL C1 or C2, conrm with OK
Select ON (for turn-on times), conrm with OK
Set required turn-on time (Mo–Fr, 7:30), conrm with OK
Select COPY, conrm with OK
ADD TUESDAY is displayed, conrm by pressing OK and also
conrm the days We, Th, Fr by pressing OK.
Continue with u until SAVE is displayed.
Conrm by pressing OK.
Repeat all steps for the turn-off time, however instead of
selecting ON with uselect OFF and enter 12:00 for hour and
minute.
Change switching times
MENU
uSWITCH
CHANNEL C1
MONDAY
MODIFY
HOUR
MODIFY
MINUTE
MODIFY
SINGLE
DAY
MODIFY
BLOCK
PROGRAM
NEW
CHECK
MODIFY
DELETE
u
u
LYou can either change or delete a block, i.e. a switching
time copied for several days (e.g. Mon-Fri) or a single
switching time
Change individual switching times
Press MENU
Select PROGRAM and press OK to conrm
Select CHANGE, conrm by pressing OK
Select SWITCH, conrm by pressing OK
Select CHANNEL C1 or C2, conrm with OK
Select day, conrm with OK
MODIFY HOUR, use the + or – buttons to change hour and
minute and conrm with OK.
To change several switching times, select MODIFY BLOCK,
conrm with OK
Delete switching program
MENU
uSWITCH
CHANNEL C1
MONDAY
DELETE
SINGLE DAY
DELETE
BLOCK
PROGRAM
NEW
CHECK
MODIFY
DELETE
u
u
LYou can either delete a block, i.e. a switching time copied
for several days (e.g. Mon-Fri) or a single switching time
Press MENU.
Select PROGRAM and conrm with OK
Select DELETE, conrm with OK
Select SWITCH, conrm with OK
MONDAY is displayed, conrm with OK
Select DELETE BLOCK, conrm with OK
With u DELETE MONDAY etc. individual days can also be
cleared.

4
Pulse programming
PROGRAM
MENU
NEW
CHECK
MODIFY
DELETE
END
uuu u
SWITCH PULSE
CHANNEL C1
MEM FREE
84
ON C1 ON
HOUR
MINUTE
SECONDS
PULSE
LENGTH
MINUTE
SECONDS
MONDAY
SAVE
COPY
u
u
...
Example: Switch on pause signal on Monday 8:05 hrs for 5
sec
Press MENU
Select PROGRAM, conrm with OK
Select NEW, conrm with OK
With u select PULSE, conrm with OK
Select CHANNEL C1 or C2, conrm with OK
Select ON, conrm with OK
Use the + or – buttons to enter hour, minute, second (8:05)
and conrm with OK
Use the + or – buttons to enter the duration of the pulse in
minutes and seconds (5 sec) and conrm with OK. MONDAY
is displayed.
Select day, conrm with OK
Select COPY or SAVE
To save press u and conrm with OK
To copy press OK
Cycle programming
In addition to turn-on and turn-off times (switching time)
and short time pulses (pulse) cycle times (cycle) can also be
programmed. The pulse duration (+ pulse pause) is limited to
17 hrs, 59 min, 59 sec
LCycle times refers to cyclically repetitive time functions
such as fan controls, urinal rinses etc.
Example: Switch on water rinsing Monday from 8:00 to 20:30
hrs every 15 min for 20 sec (8:00:00–8:00:20 On; 8:15:00–
8:15:20 On; 8:30:00–8:30:20 On etc.)
Cycle programming:
•Start cycle: Monday 8:00 hrs
•Pulse duration: 20 s
•Pause duration (pause): 14 min and 40 s
•End cycle: Monday 20:30 hrs
LObserve the number of maximum electrical switching
cycles when using the cycle function.
PROGRAM
MENU
NEW
uu u
CYCLE
CHANNEL C1
MEM FREE
84
START
CYCLE
HOUR
MINUTE
MONDAY
PULSE
LENGTH
PAUSE
ENDLESS
WITH END
STOP CYCLE
u
u
CHECK
MODIFY
DELETE
END
...
Press MENU
Select PROGRAM, conrm with OK
Select NEW, conrm with OK
With u select CYCLE, conrm with OK
Select CHANNEL C1 or C2, conrm with OK
START CYCLE is displayed, conrm with OK
Use the + or – buttons to enter hour, minute, day (8:00 hrs
Monday) and conrm with OK
Enter PULSE LENGTH (20 s), conrm with OK
Enter pause duration PAUSE (14 min and 40 s), conrm
with OK
Select WITH END, conrm with OK
STOP CYCLE is displayed, conrm with OK
Enter end times of the cycle (20:30 hrs) and conrm with
OK
Setting holiday function
MANUAL
CHANNEL C1
MENU
PERM ON
PERM OFF
OVERRI ON
TIMER
HOLIDAY
RANDOM
END
ON
BEGINN
HOLIDAY
END
HOLIDAY
u
... ...
Press MENU
Select MANUAL and press OK to conrm
Select CHANNEL C1 or C2, conrm with OK
Select HOLIDAY and press OK to conrm
Select ON and press OK to conrm
Select START HOLIDAY and press OK to conrm
Enter YEAR, MONTH, DAY, HOUR and press OK to conrm
Select END HOLIDAY and press OK to conrm
Enter YEAR, MONTH, DAY, HOUR and press OK to conrm

5
Activating PIN code
The PIN code is set in OPTIONS via the menu.
LIf you have forgotten your PIN, call the Theben Hotline.
LHave the serial number ready
OPTIONS
NO PIN
WITH PIN CURRENT
PIN
NEW PIN
00 00
OPERATING
HOURS
EXT INPUT
LCD ILLU-
MINATION
LANGUAGE
PIN
FACTORY
SETTING
INFO
END
u
u
MENU
Setting manual or permanent switching
Manual or permanent switching can be set via the menu in
MANUAL or (in the automatic screen) by button combination
(see picture).
•Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•Permanent switching:
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective
ok
Chanel
C1
Chanel
C2
Activating manual control
Briey press both buttons simultaneously
Activating permanent switching
Press both buttons simultaneously for 2 seconds
Cancelling manual/permanent switching
Press both buttons simultaneously
Set external input
For the channel, an EXTERNAL INPUT (see gure) can be set
with different functions.
3 sub-menus can be selected: Inactive, push button (function),
switch (function)
•INACTIVE: The external input has no function
•PUSH BUTTON: Manual (manual control), Timer (count-
down timer) are selectable
•SWITCH: Permanent On, permanent Off are selectable
LIf a function is activated via an external push button or
switch, EXTERNAL is displayed.
OPTIONS
OPERATING
HOURS
EXTERNAL
OUTPUT
LCD ILLU-
MINATION
LANGUAGE
PIN
CHANNEL C1
OVERRIDE
TIMER
BUTTON
SWITCH
FACTORY
SETTING
INFO
NOT ACTIVE
u
u
MENU
Press MENU, with uselect EXT INPUT and follow the indi-
cations on the display.
Hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
to 10,000 h)

6
Using the OBELISK top2 memory card
All functions can also be set on the PC using the OBELISK
software and transferred to the device via the memory card.
Insert memory card in the time switch
Read in/out saved switching times and device setups in
the time switch or start Obelisk program
Remove memory card after copying etc.
!Avoid mechanical overload and contamination during
storage/transport
LPC software OBELISK top2 available at
www.theben.de
Copying OBELISK → TIME
This copies the switching program and optionally all time
switch settings (e.g. external input, time format etc.) from the
memory card in the time switch.
Copying TIME →OBELISK
This copies all switch programmes and settings from the time
switch to the memory card.
Starting OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
uuu
OBELISK
COPY
OBELISK ->
TSWI
COPY TSWI
-> OBELISK
RUN
OBELISK
CHECK
OBELISK
OVERWRITE
OK
OVERWRITE
OK
Resetting the time switch
Press the 4 buttons simultaneously
▻You can choose between KEEP PROGRAM and DELETE
PROGRAM
6. Technical data
Operating voltage: 12 - 24 V, +10 % /–15 %
12 - 24 V DC, +10 % /–15 %
Frequency: 50–60 Hz
Power consumption TR 611/622: max. 0,2 W - 0,6 W / 0,2 W - 0,9 W
Max switching capacity: 16 A (at 250 V, cos ϕ= 1)
switching capacity: 2 A (at 250 V, cos ϕ= 0,6)
Min. switching capacity: 10 mA/230 V AC
100 mA/24 V AC/DC
Shortest switching time: 1 second
Protection rating: IP 20 in accordance with EN 60529
Protection class: II in accordance with
EN 60730-1 subject to designated
installation for supply with FELV
and/or mains switching
Protection class: III for supply with SELV and swit-
ching of SELV
Operating temperature: –30 °C … +55 °C
Power reserve: 10 years at +20 °C
Time accuracy: ±0,25 s/day (25 °C)
Rated impulse withstand voltage: 4 kV
Pollution degree: 2
Contact: two way switch
Glow lamp load (4 A): 1000 W
Halogen lamp load (4 A): 1000 W
Fluorescent lamp load: uncorrected
Series corrected (4 A):
parallel-corrected:
1000 VA
80 W (max. 12 µF)
Compact uorescent tubes (EVG) 230 V: 30 W
LED lamps (<2 W) (230 V): 6 W
LED lamps (>2 W < 8 W) (230 V): 20 W
LED lamps (>8 W) (230 V): 20 W
7. Contact
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Tel. [phone]
Fax [phone]
Hotline
Tel. [phone]
[email protected]
Addresses, telephone numbers etc.
www.theben.de