ACU-RITE 535 User manual

Digital Timer
#00535
Instruction Manual
INST - 00535 090909
1 • OVERVIEW OF FEATURES
Thank You for purchasing this ACURITE® product. Please read this manual in it’s
entirety to fully enjoy the benefits and features of this product. Please keep this
manual for future reference.
NOTE: A clear film is applied to the display at the factory that must be removed
prior to using this product. Locate the clear tab and simply peel to remove.
Hours
Indicator
Minutes
Indicator
Please DO NOT return product to the retail store.
For technical assistance and product return information, please call
Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:45 P.M. (CST)
www.chaneyinstrument.com
LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of
defects if properly installed and operated for a period of one year from date of purchase. REMEDY FOR BREACH OF THIS
WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under normal use
and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by
Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned
goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges.
This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal
wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than
a
uthorized representatives of Chaney.
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL
OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY DISCLAIMS
ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM
ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS
ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY ACCEPTANCE
OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES
ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY
OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS
AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN
WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
Chaney Customer Care
877-221-1252
Mon-Fri 8:00 a.m. to 4:45 p.m. CST
www.chaneyinstrument.com
- 1 -
Seconds
Indicator
START/STOP
Button
Clear Button
Recall Button

2 • INSTRUCTIONS FOR USE
- 3 -- 2 -
Product Registration
To receive product information, register
your product online. It’s quick and easy!
Log on to http://www.chaneyinstrument.com/product_reg.htm
1. The timer is “always on”.
2. In sleep mode LCD will display 00:00:00. This will not drain battery.
3. MINUTES: Press the “MINUTES” button until desired number reached.
Hold the “MINUTES” button down to activate “rapid advance”.
4. SECONDS: Press the “SECONDS” button until desired number reached.
Hold the “SECONDS” button down to activate “rapid advance:.
5. START/STOP: Pressing the “START/STOP” button without entering a time
causes the timer to start counting up. Pressing the “START/STOP” button
after entering a time will cause the timer to start counting down from
the time entered.
6. CLEAR: Press the “CLEAR” button to clear the time displayed.
When timer is set but NOT running:
Press the “START/STOP” button to begin counting down from the time entered.
When the timer is running:
Press the “START/STOP” button to stop the countdown.
General Timer Description: This is a countdown timer (this means that when
the timer reaches 00:00 it will sound an alarm). The alarm will sound for
1 minute at 75 db.
3 • WARNING
WARNING: Do not place on or near hot surfaces. Do not immerse unit in water.
General Timer Description:
This is a countdown timer (this means that when the timer reaches 00:00 it will
sound an alarm). The alarm will sound for 1 minute at 75 db.