Theben TR 608 top2 S User manual

GB
Installation and
operating instructions
Digital time switch
TR
TR 608 top2 S 6080101
TR 609 top2 S S 6090101
DGB F
I E NL
309364
MENU OK
230-240V~
50-60Hz
R10a -25T
16(4)A 250V~
1
2
TR 609 top2 S
µ
LN
21
N
L
L
max. 100 m
Ext1
MENU OK
230-240V~
50-60Hz
R10a -25T
16(4)A 250V~
1
2
3
µ
LN
3
21
N
L
L
TR 608 top2 S
TR 609 top2 S
TR 608 top2 S
Connection of
different external
wires is permitted

Contents
Basic safety instructions 3
Display and keys
Operating instructions 4
Connection/installation 5
Overview of menu selection 6
Initial start-up
Reset 7
Menu item PROGRAMM
Program switching time 8
Check/modify switching time 10
Delete switching time 11
Pulse time programming 12
Cycle time programming 14
Menu item TIME/DATE 15
Menu item MANUAL 16
Override and permanent switching 17
2
Menu item OPTIONS 18
Enter PIN code 19
External input 20
OBELISK top2 memory card 22
Technical data 23
Service address/Hotline 24

Basic safety instructions
• The device is designed for installation on DIN top hat rails (in accordance with EN 60715)
• Corresponds to type 1 BSTU in accordance with IEC/EN 60730-2-7 / IEC/EN 60730-1
• Power reserve (10 years) is reduced if memory card is inserted (in battery operation)
Designated use
• The time switch can be used for lighting, bell systems, ventilation etc.
• Only use in enclosed dry spaces
Do not use on safety devices, e.g. escape route doors, fire safety equipment etc.
Disposal
Dispose of device and batteries separately in an environmentally sound manner
Danger of death through electric shock or fire!
Installation should only be carried out by a qualified electrician!
WARNING
GB
3

4
Screen and keys Operating instructions
YES
Confirmation
Press
OK
NO
Amend/
change
Press

bbbb
1. Read text lines
Text represents query
bbbb
2. Make a decision
MENU
– Activate screen
– Open menu
– Cancel menu
– ESC
(1 step back)
OK
– Store
selection
– Confirm
selection

Options are
displayed
MENU OK
230-240V~
50-60Hz
R10a -25T
16(4)A 250VAC
1
2
3
TR 608 top2
µ
LN
3
21
C1
C2
C
C2
Time display
Date display
Channel status
ON = On
OFF = Off
Weekdays from 1 to 7
AM
PM

Connection/installation
Connect cable
Strip cable by 8 mm (max. 9 mm).
Insert cable at 45° in the open terminal
(2 cables per terminal position possible).
Only with flexible wires: To open the plug-in
screwless terminal, press screwdriver downwards.
Warning, danger of death through electric shock!
Must be installed by qualified electrician!
Disconnect power source.
Cover or shield any adjacent live components.
Ensure device cannot be switched on!
Check power supply is disconnected.
Earth and bypass.
WARNING
5
GB
45° cable
Plug-in screwless
terminal NC
contact
Test tap
Plug-in terminal

6
Overview of menu selection

* only with TR 609 top2 S
PROGRAM END
19 05 11
ON 35
9:40
1
NEW
CHECK
MODIFY
DELETE
END
MENU
TIME/DATE
TIME
DATE
SU-WI
WEEK DAY
FORME
DATE
FORME TIME
END
MANUAL
PERM ON
PERM OFF
OVERRIDE
ON
TIMER*
HOLIDAY
RANDOM*
END
OPTIONS
OPERATING
HOURS
EXTERNAL
INPUT*
LANGUAGE
PIN
FACTORY
SETTINGS
INFO
END

GB
19 05 11
ON 35
9:40
1
SU-WI
GB/IRL/P
SU-WI
FIN/GR/TR
SU-WI CDN
SU-WI USA
SU-WI IRAN
SU-WI NEW
ZEALAND
SU-WI OWN
RULE
NO SU-WI
Initial start-up
Set date, time and summer/
winter time rule
Press required key and display
follows on screen (see figure).

or

ok

ENGLISH
RETAIN
PROGRAM
DELETE
PROGRAM
FORME
DATE
31 05 11
7
RESET
Press the 4 buttons simultaneously.
You can choose between RETAIN
PROGRAM and DELETE PROGRAM.
YEAR
MONTH
DAY
FORME
TIME
24 h
HOUR
MINUTE
SU-WI
EUROPE 
or

8
PROGRAM
Program switching time
Example: Switch on sports hall lighting from Mon–Fri, 7:30 to 12:00 hrs
Press MENU. PROGRAM is displayed.
Confirm by pressing OK. NEW is displayed.
Confirm by pressing OK. SWITCH is displayed.
Confirm by pressing OK. Select ON (for switch-on times).
Confirm by pressing OK. The display shows HOUR.
Use the +or –keys to enter hour, minute, (07:30) and confirm by pressing OK.
MONDAY is displayed.
Confirm by pressing OK. COPY is displayed.
Confirm by pressing OK. ADD TUESDAY is displayed.
Confirm by pressing OK and also confirm the days Wed, Thurs, Fri by pressing OK.
Continue with to SAVE is displayed. Confirm by pressing OK.
Repeat all steps for the switch-off time however instead of selecting ON with select OFF and
enter 12:00 for hour and minute.

MENU

ON 7.30


 
  
9
GB
PROGRAM
NEW
SWITCH
ON
PULSE
TUESDAY WEDNESDAY
CYCLE END
HOUR
MINUTE
MONDAY
COPY
ADD
TUESDAY
SAVE
SAVE
...
84 memory locations are available
(TR 609 top2 S).

Check/modify switching time
Press MENU. PROGRAM is displayed.
Confirm by pressing OK. NEW is displayed.
Use to select CHECK.
Confirm by pressing OK.
Confirm SWITCH by pressing OK.
The first of the entered switching times
is displayed.
Confirm by pressing OK. NEXT is displayed.
Change individual switching times
Press to select MODIFY.
Confirm by pressing OK. The display shows
SWITCH.
Confirm by pressing OK. The display shows
the first time switch MONDAY.
Confirm by pressing OK. The display shows CHANGE HOUR.
Use the+or – keys to enter hour and minute and confirm by
pressing OK.
10
MENU

PROGRAM
NEW CHECK MODIFY DELETE

SWITCH
MONDAY
NEXT MODIFY
CHANGE
HOUR
CHANGE
MINUTE
CHANGE
BLOCK
DELETE
DELETED
...
TUESDAY
...

11
Delete switching time
Press MENU.
PROGRAM is displayed.
Confirm by pressing OK. NEW is displayed.
Press to select DELETE.
Confirm by pressing OK. The display shows
SWITCH.
Confirm by pressing OK.
MONDAY is displayed.
Confirm by pressing OK. The display shows
DELETE BLOCK.
Confirm by pressing OK. The display shows
DELETED .
With CLEAR MONDAY etc. individual days
can also be cleared.
GB
MENU

PROGRAM
NEW DELETE
 
SWITCH
MONDAY
DELETE
BLOCK
DELETE
MONDAY
DELETEDDELETED

12
Pulse time programming (only with TR 609 top2 S)
Example: Switch on pause signal on Monday 8:05 hrs for 5 sec
Press MENU. PROGRAM is displayed.
Confirm by pressing OK. NEW is displayed.
Confirm by pressing OK. SWITCH is displayed.
Select PULSE by pressing .
Confirm by pressing OK. ON is displayed.
Confirm by pressing OK. The display shows HOUR.
Use the +or –keys to enter hour, minute, second (8:05) and confirm by pressing OK.
PULSE LENGTH is displayed.
Use the +or –keys to enter the duration of the pulse in minutes and seconds (5 sec).
Confirm by pressing OK. MONDAY is displayed.
Confirm by pressing OK. COPY is displayed.
Press to select SAVE.
Confirm by pressing OK.

MENU
GB


ON 8.05
  
PROGRAM
NEW
SWITCH PULSE CYCLE END

 
ON
HOUR
MINUTE
SECOND
PULSE LENGTH
IN MINUTES
PULSE LENGTH
IN SECONDS
MONDAY TUESDAY WEDNESDAY
SAVECOPY
ADD
TUESDAY
...
SAVE
13
Length 5 sec

14
Cycle time programming (only with TR 609 top2 S)
In addition to switch-on and switch-off times (switching time) and short time pulses (pulse) cycle
times (cycle) can also be programmed. The pulse length (+ pulse pause) is limited to 17 hrs,
59 min, 59 sec
• Cycle times refers to cyclically repetitive time functions such as fan controls, urinal rinses etc.
Example: Switch on water rinsing Monday from 8:00 to 20:30 hrs every 15 min for 20 sec
(8:0000–8:0020 On; 8:1500–8:1520 On; 8:3000–8:3020 On etc.)
Cycle programming
– Start cycle: Monday 8:00 hrs
– Pulse length: 20 sec
– Pause length: 14 min 40 sec
– Cycle end: Monday 20:30:00 hrs
Observe the number of maximum electrical switching cycles when using the ‚cycle‘ function.

15
TIME/DATE
In the menu TIME/DATE the TIME, DATE, SUMMER WINTER RULE, WEEKDAY etc. can be ente-
red/changed in the submenus.
Press MENU using select DATE/TIME and follow the indications on the display.
MENU
     
TIME/DATE
TIME
HOUR
MINUTE
20
10:15
SET DATE SU-WI WEEKDAY FORM DATE FORME TIME END
YEAR 31 12 11
MONDAY 12/31/11
DAY
02.05
11–12–31
SU-WI
EUROPE
24 h
MONDAY
02.05
SU-WI
GB/IRL/P
12 h
AM PM
...
GB

MANUAL
In the MANUAL menu manual switch functions are applied. In the submenus MANUAL, PERMA-
NENT ON/OFF, TIMER*, HOLIDAY, RANDOM the manual switching can be activated/programmed.
Press MENU using select MANUAL and follow the indications on the display.
16
* only with TR 609 top2 S
MENU
     
MANUAL
PERM ON
PERM
On 20
15:30
PERM OFF OVERRIDE
ON
TIMER* HOLIDAY RANDOM* END
ON or OFF
HOLIDAY
START
YEAR
On
2011
RANDOM 1TIMER
On or. Off
RANDOM 2
...
OVERRIDE
On 20
15:30 HOURS
On 10
12:30
PERM
On 20
PERM OFF
END

GB
Override and permanent switching
Override and permanent switching can be set using the menu in MANUAL or in normal mode
(automatic screen) by direct keystroke (see figures).
Override
Reversing the channel status to the next automatic or programmed switching.
Permanent switching
As long as a permanent switching (on or off) is activated, the programmed switching times are
ineffective.
Activate override
Briefly press key.
Activate permanent switching
Press key for 2 sec.
Cancel override/permanent switching
Briefly press key again.
17

OPTIONS
In the menu OPTIONS the submenus OPERATING HOUR, LANGUAGE, PIN, EXTERNAL INPUT,
FACTORY SETTINGS as well as INFO can be requested.
Press MENU using select OPTIONS and follow the indications on the display.
18
MENU
     
OPTIONS
OPERATING
HOUR
SHOW
HOUR
DELETE
SERVICE
END
EXT INPUT* LANGUAGE PIN FACTORY
SETTINGS
INFO END
NOT ACTIVE LOAD
FACTORY
SETTINGS
BUTTON
SWITCH
DEUTSCH TR 609
top2 S
NO PIN or.
WITH PIN
CURRENT PIN
NEW PIN
SAVED
ENGLISH 000000,0
02 05 11
END
...
* only with TR 609 top2 S

GB
19
MENU
OPTIONS
OPERATING
HOUR
EXT INPUT
LANGUAGE
PIN
FACTORY
SETTINGS
INFO
END
WITH PIN NO PIN
CURRENT
PIN
NEW PIN
Enter PIN code
The PIN-Code is set in OPTIONS via
the menu. If you have forgotten your
PIN call the Theben Hotline.

ok



20
External Input (only with TR 609 top2 S)
For the channel an EXTERNAL INPUT (see figure) can be set with different
functions.
Press MENU using select EXT INPUT and follow the indications on the display.
3 submenus can be selected: Inactive, push button (function), switch (function)
– INACTIVE: The external input has no function
– PUSH BUTTON: Override (manual switching), timer (Countdown timer) can be selected.
– SWITCH: Permanently on, permanently off can be selected.
Note:
If a function is activated via an external push button or switch, EXTERNAL is displayed.