thermastor Phoenix 200 HT User manual

1
www.thermastor.com • [e-mail]-Free 1-800-533-7533
Items included with kit:
4 brackets, 1 shield
Tools needed:
5/16” nut driver/wrench
200 MAX and 200 HT Shield
Installation Instructions
1
www.thermastor.com • [e-mail]-Free 1-800-533-7533
Read and Save These Instructions
TS-379
Revised 1/07
Bracket orientation to create top and
bottom tracks
Remove and save rear 2 of 3 top screws.
Place mounting bracket in correct position
for upper track and using existing screws.
Repeat on opposite side.
Remove and save bottom 2 screws. Place
mounting bracket in correct position for
lower track and install using existing
screws. Repeat on opposite side.
Slide shield over the track and push shield towards unit.
43
2
1
Top bracket
position
Bottom bracket
position
Unit Wall
Shield
Shield
Bottom
placement
Top
placement
P. O. Box 8680 Phone [phone]
Madison, WI 53708 Toll-Free 1-800-533-7533
www.thermastor.com [e-mail]

2
www.thermastor.com • [e-mail]-Free 1-800-533-7533