THERMOROSSI CREO User manual

CREO –CREO SUPREME
ITA - MANUALE DI INSTALLAZIONE.
FRA - MANUEL D’INSTALLATION.
ENG - INSTALLATION GUIDE.
DEU - INSTALLATIONSANLEITUNG.
ESP - MANUAL DE INSTALACIÓN.
NL - HANDLEIDING VOOR INSTALLATIE.

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 1
ENG

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 2
ENG
INDEX
INSTRUCTIONS VALID ONLY FOR CREO.............................................................................................. 3
1 –INTRODUCTION.................................................................................................................................. 3
2 –COMPONENTS ................................................................................................................................... 3
3 –ASSEMBLING THE CASING .............................................................................................................. 4
INSTRUCTIONS VALID ONLY FOR CREO SUPREME........................................................... 7
1 –INTRODUCTION.................................................................................................................................. 7
2 –COMPONENTS ................................................................................................................................... 7
3 –ASSEMBLING THE CASING .............................................................................................................. 8

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 3
ENG
INSTRUCTIONS VALID ONLY FOR CREO
.
1 –INTRODUCTION
1.1 GENERAL GUIDELINES
We recommend cleaning the casing with a dry microfibre cloth, when the appliance is switched off and completely cold.
Thermorossi S.p.A. retains copyright on theses service instructions. These instructions may not be reproduced or communicated to
third parties or used in any other way without the necessary authorisation.
1.2 TRANSPORTATION AND STORAGE
TRANSPORTATION AND HANDLING
Take special care to protect all the fragile parts from mechanical impact which could damage them.
STORAGE
The casing must be stored in a humid-free environment and sheltered from the weather; avoid placing the casing directly on the
ground. The company is not responsible for damages caused by negligence.
2 –COMPONENTS
The kit includes the following elements:
Attention: the casings are delicate and must be handled with extreme care. Use soft cotton gloves when handling
them. Clean with soft dry microfibre cloths for delicate surfaces such as lenses or glasses.
A
Glass bracket
B
Front glass
C
Right side panel
D
Left side panel
E
Lower profile
AB
D
C
E

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 4
ENG
3 –ASSEMBLING THE CASING
77000023
WAIR
N
NM
4 –Fasten the glass bracket (A) to the appliance
using the screws (X) supplied in the kit. Then
slide the glass (B) into the glass bracket (A).
ATTENTION: for WOOD bodies, do not carry
out this operation; go directly to the next point.
A
DETTAGLIO A
Assieme di montaggio
Rivestimento Creo
19/04/2023 rev.0
Pidra 14-18-21
Pair
Natural.
Natural Plus Evo.
2
1
2
1
1 –Take off the upper top (M) by undoing the 4
screws (N).
ATTENTION: for PELLET bodies, do not carry
out this operation; start directly from the next
point.
2 –Remove the 3 screws (1) securing the front
bracket (2). Eliminate the bracket (2).
3 –Fasten the glass bracket (A) to the appliance
using the screws (X) supplied in the kit. Then
slide the glass (B) into the glass bracket (A).
Then refit the upper top (M).
ATTENTION: for PELLET bodies, do not carry
out this operation; start directly from the next
point.
A
B
X
Assieme di montaggio
Rivestimento Creo
19/04/2023 rev.0
Pidra 14-18-21
Pair
Wair
Natural.
Natural Plus Evo.
B
A
X

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 5
ENG
C
DETTAGLIO C
D
5 –Remove the lower bracket (4) by unscrewing the 4
screws (3). Eliminate the lower bracket (4).
Assieme di montaggio
Rivestimento Creo
19/04/2023 rev.0
Pidra 14-18-21
Pair
Wair
Natural.
Natural Plus Evo.
4
3
3
6 –Fit the right-hand side panel (C) inserting the
flaps (DETAIL B) into the appropriate seats. It is
advisable to widen the flaps by 1 or 2 mm.
7 –Fit the left-hand side panel (D) inserting the
flaps (DETAIL C) into the appropriate seats. It is
advisable to widen the flaps by 1 or 2 mm.
B
DETTAGLIO B
C

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 6
ENG
Perno
Sede
E
E
8 –Fit the lower profile (E) by fitting the studs (Perno) into the appropriate seats (Sede). It is advisable to fit the 3 studs
on one side first, then the 3 studs on the other side.

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 7
ENG
INSTRUCTIONS VALID ONLY FOR
CREO SUPREME
1 –INTRODUCTION
1.1 GENERAL GUIDELINES
We recommend cleaning the casing with a dry microfibre cloth, when the appliance is switched off and completely cold.
Thermorossi S.p.A. retains copyright on theses service instructions. These instructions may not be reproduced or communicated to
third parties or used in any other way without the necessary authorisation.
1.2 TRANSPORTATION AND STORAGE
TRANSPORTATION AND HANDLING
Take special care to protect all the fragile parts from mechanical impact which could damage them.
STORAGE
The casing must be stored in a humid-free environment and sheltered from the weather; avoid placing the casing directly on the
ground. The company is not responsible for damages caused by negligence.
2 –COMPONENTS
The kit includes the following elements:
Attention: the casings are delicate and must be handled with extreme care. Use soft cotton gloves when handling
them. Clean with soft dry microfibre cloths for delicate surfaces such as lenses or glasses.
A
Glass bracket
B
Front glass
C
Right side panel
D
Left side panel
E
Lower profile
F
Screws
G
Food warmer
H
Air deflector
BA
E
HFG
D
C

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 8
ENG
3 –ASSEMBLING THE CASING
Assieme di montaggio
Rivestimento Creo Supreme
01/12/2022 rev.0
Pair 13
2
1
A
DETTAGLIO A
G
F
HY
3 –Fix the air deflector (H) to the food warmer (G) using the screws
(F). Then secure all to the appliance using the screws (Y). see detail A
1 –Remove the 3 screws (1) securing the front
bracket (2). Eliminate the bracket (2).
2 –Fasten the glass bracket (A) to the appliance
using the screws (X) supplied in the kit. Then
slide the glass (B) into the glass bracket (A).
B
A
X

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 9
ENG
Perno
Sede
E
E
4 –Fit the right-hand side panel (C) inserting the
flaps (DETAIL B) into the appropriate seats. It is
advisable to widen the flaps by 1 or 2 mm.
C
B
DETTAGLIO B
5 –Fit the left-hand side panel (D) inserting the flaps
(DETAIL C) into the appropriate seats. It is advisable
to widen the flaps by 1 or 2 mm.
D
C
DETTAGLIO C
6 –Fit the lower profile (E) by fitting the studs (Perno) into the appropriate seats (Sede).
It is advisable to fit the 3 studs on one side first, then the 3 studs on the other side.

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 10
ENG

Installation, use and maintenance guide
CASING CREO –CREO SUPREME
Pag 11
ENG
Via Grumolo, 4 (Z.I.) 36011 Arsiero (VI) - ITALY
Fax [phone] - www.thermorossi.com - [e-mail]
Fire Lovers
Cod. 70041079 06/2023