thomann Harley Benton TableAmp BlueTooth User manual

TableAmp BlueTooth
guitar combo
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
24.05.2019, ID: 450940

Table of contents
1 General notes............................................................................................................................................... 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Installation and starting up................................................................................................................ 13
5 Connections and controls................................................................................................................... 14
6 Technical specications....................................................................................................................... 19
7 Plug and connection assignment.................................................................................................... 20
8 Protecting the environment.............................................................................................................. 23
Table of contents
TableAmp BlueTooth
3

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
guitar combo
4

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
TableAmp BlueTooth
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General notes
guitar combo
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General notes
TableAmp BlueTooth
7

2 Safety instructions
This device is intended to be used for amplication and playback of signals from musical
instruments with electromagnetic pickups. Any other use or use under other operating condi‐
tions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
guitar combo
8

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use su‐
cient ear protectors.
Safety instructions
TableAmp BlueTooth
9

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
guitar combo
10

NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
re.
Safety instructions
TableAmp BlueTooth
11

3 Features
Special features of the device:
nBuilt-in Bluetooth function
n30 watt RMS
n5" woofer
n1" tweeter
nConnections:
– Mic / Line input, designed as XLR / 1/4" combo socket
– AUX input, designed as 3.5 mm phone socket
– Headphones output, designed as 3.5 mm phone socket
nGuitar / Microphone, Bass, Treble, Reverb and Master Volume controls
nStandby function
nIdeal for singing and playing along
Features
guitar combo
12

4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
NOTICE!
Possible property damage by magnetic elds
Loudspeakers produce a static magnetic eld. Therefore, maintain an appropriate
distance to devices that can be adversely aected or damaged by an external
magnetic eld.
Installation and starting up
TableAmp BlueTooth
13

5 Connections and controls
Top side
Connections and controls
guitar combo
14

1 Bluetooth button
To establish a Bluetooth connection, press and hold the Bluetooth button for 2 seconds to search for Bluetooth-ena‐
bled devices ready for pairing. The Bluetooth button ashes blue. The Bluetooth list of the device to be paired dis‐
plays ‘TableAmp’ . Accept the connection. A short beep will sound when the connection was established successfully
and the Bluetooth button will turn solid blue.
2 Volume control for guitar / microphone input
3 Bass control
4 Treble control
5Eects control
6 Master Volume control
7 Equalizer selector switch
Press the selector to control bass, treble and eect.
Slide the selector down to control only the guitar input.
Slide the selector up to control both the guitar input and the microphone input.
Connections and controls
TableAmp BlueTooth
15

8 Headphones output, designed as 3.5 mm phone socket
9 AUX input, designed as 3.5 mm phone socket
Connections and controls
guitar combo
16

Rear panel
Connections and controls
TableAmp BlueTooth
17

10 Signal source selector switch (guitar or microphone)
11 Mic / Line input, designed as XLR / 1/4" combo socket.
12 Socket for connecting the supplied plug-in power supply
13 LED status indicator
Control LED for the power supply. The LED lights up when the device is turned on or in standby mode.
14 Main switch
Turns the device on and o.
The power-saving Auto Power OFF function shuts o the device after about 20 minutes without input signal and the
Bluetooth button stops lighting. Press the Bluetooth button or turn the main power switch o and on again to turn
the power back on.
Connections and controls
guitar combo
18

6 Technical specications
Speaker 1 × 5" woofer
1 × 1" tweeter
Output power 30 W (RMS)
Frequency range 30 Hz to 20 kHz
Signal-to-noise ratio ≥70 dB
Operating supply voltage Plug-in power supply (15 V / 2.4 A )
Dimensions (W × H × D) 320 mm × 200 mm × 160 mm
Weight 3.1 kg
Version Bluetooth-Version 4.0
Technical specications
TableAmp BlueTooth
19

7 Plug and connection assignment
This chapter will help you select the right cables and plugs to connect your valuable equip‐
ment in such a way that a perfect sound experience is ensured.
Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a
plug ts into the socket, an incorrect connection may result in a destroyed power amp, a short
circuit or ‘just’ in poor transmission quality!
Unbalanced transmission is mainly used in semi-professional environment and in hi use.
Instrument cables with two conductors (one core plus shielding) are typical representatives of
the unbalanced transmission. One conductor is ground and shielding while the signal is trans‐
mitted through the core.
Unbalanced transmission is susceptible to electromagnetic interference, especially at low
levels, such as microphone signals and when using long cables.
In a professional environment, therefore, the balanced transmission is preferred, because this
enables an undisturbed transmission of signals over long distances. In addition to the conduc‐
tors ‘Ground’ and ‘Signal’, in a balanced transmission a second core is added. This also transfers
the signal, but phase-shifted by 180°.
Introduction
Balanced and unbalanced trans‐
mission
Plug and connection assignment
guitar combo
20