thomann SA 125 User manual

SA 125
mixer amplifier
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
16.02.2016, ID: 277370

Table of contents
1 General notes............................................................................................................................................... 4
2 Safety notes.................................................................................................................................................. 6
3 Features....................................................................................................................................................... 12
4 Installation and operation.................................................................................................................. 13
4.1 Pin assignment.................................................................................................................................. 13
4.2 Screw terminal strip........................................................................................................................ 16
5 Connectors and controls...................................................................................................................... 18
6 Technical data........................................................................................................................................... 24
7 Cleaning....................................................................................................................................................... 26
8 Protecting the environment.............................................................................................................. 27
Table of contents
SA 125
3

1 General notes
This user manual contains important information on safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to other users, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
This section provides an overview of the symbols and signal words used in this user manual.Symbols and signal words
General notes
mixer amplifier
4

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General notes
SA 125
5

2 Safety notes
This device is intended to be used for amplification, mixing and playback of signals from
musical instruments and microphones. Use the device only as described in this user manual.
Any other use or use under other operating conditions is considered to be improper and may
result in personal injury or property damage. No liability will be assumed for damages resulting
from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety notes
mixer amplifier
6

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Safety
Safety notes
SA 125
7

DANGER!
Electric shock caused by high voltages at the power amplifier output
The output voltages of modern high-performance amplifiers may result in death
or serious injury.
Never touch the bare ends of loudspeaker cables when the amplifier is on.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety notes
mixer amplifier
8

CAUTION!
Possible hearing damage
With loudspeakers or headphones connected, the device can produce volume
levels that may cause temporary or permanent hearing impairment.
Do not operate the device permanently at a high volume level. Decrease the
volume level immediately if you experience ringing in your ears or hearing
impairment.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety notes
SA 125
9

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety notes
mixer amplifier
10

NOTICE!
Possible damages by using an external battery
Improper handling may cause an arc or short circuit between the bare ends of a
live power cable to an external battery. This can destroy the battery and there is a
fire hazard!
If you use an external battery for power supply, connect the power cord to the
screw terminal on the rear panel first. Then connect the free ends of the cables to
the battery poles. Pay attention to the polarity marking! To disconnect the bat‐
tery, unscrew the cables on the battery first, then on the terminals of the device.
Also pay attention to the safety instructions of the battery manufacturer.
Safety notes
SA 125
11

3 Features
n4 microphone/line inputs
n24 V phantom powering
nPriority control
nCD/AUX input
nInput for external pre-amplifier
nOutput for external power amplifier
nScrew terminals for loudspeakers and mains-independent voltage supply
Features
mixer amplifier
12

4 Installation and operation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
4.1 Pin assignment
You may use XLR connectors with either balanced or unbalanced pinout. Below you will find
an overview of the different options.
Installation and operation
SA 125
13

Balanced female XLR panel connectors are used for the signal inputs. The figures and tables
show the XLR pin assignment.
Balanced pinout:
1 Ground, shielding
2 Positive signal (+)
3 Negative signal (–)
Unbalanced pinout:
1 Ground, shielding
2 Signal
3 Jumpered with pin 1
XLR connectors for signal inputs
Installation and operation
mixer amplifier
14

The figures and tables show the pin assignments of the ¼ inch (6.35 mm) jack plugs.
Unbalanced pinout of mono jack plug:
1 Signal
2 Ground, shielding
Unbalanced pinout of stereo jack plug:
1 Signal
2, 3 Ground, shielding
Jack plugs for signal inputs
Installation and operation
SA 125
15

Balanced pinout of stereo jack plug:
1 Positive signal (+)
2 Negative signal (–)
3 Ground, shielding
4.2 Screw terminal strip
All loudspeaker units as well as the battery for mains-independent voltage supply are con‐
nected via a screw terminal strip on the rear side of the device.
First detach the cover of the screw terminal strip using a suitable screwdriver. Loosen the
required screw terminals (see connection diagram) and attach the necessary cables using a
suitable screwdriver.
Installation and operation
mixer amplifier
16

Finally check all cable connections for tightness and reattach the terminal screw strip cover to
the device.
Installation and operation
SA 125
17

5 Connectors and controls
Front panel
Connectors and controls
mixer amplifier
18

1POWER
Mains switch to turn the device on/off.
2OUTPUT
LED bar graph: The lowermost LED is permenently lit as long as the device is switched on. The upper LEDs indicate
the strength of the output signal, depending on the position of the MASTER control.
3INPUT 1 – 4
Volume controls for inputs 1 to 4.
4AUX
Volume control for the AUX input.
5BASS
Control for boosting/cutting the low frequencies (100 Hz). Starting from the neutral position, turn the control knob in
clockwise or counterclockwise direction to boost or cut the bass frequencies by up to ± 10 dB.
Connectors and controls
SA 125
19

6TREBLE
Control for boosting/cutting the high frequencies (10 Hz). Starting from the neutral position, turn the control knob in
clockwise or counterclockwise direction to boost or cut the treble frequencies by up to ± 10 dB.
7MASTER
Volume control for the signal output of the mixer amplifier.
Connectors and controls
mixer amplifier
20