thomann Millenium Drums Rookie User manual

Rookie
E-Drum Set
Assembly Instructions

Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
Internet: www.thomann.de
06.10.2022, ID: 549098

Table of contents
1 Safety instructions.......................................................................................................................................................................................................... 4
2 Scope of delivery.............................................................................................................................................................................................................. 5
3 Assembly.............................................................................................................................................................................................................................. 6
4 Protecting the environment.................................................................................................................................................................................... 12
Table of contents
Rookie 3
E-Drum Set

1 Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children.
Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and
choke!
Never let children unattended use electrical devices.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if necessary, i.e. felt pads or
similar.
Safety instructions
4Rookie
E-Drum Set

2 Scope of delivery
Before you assemble the drum set, make sure the contents of package is complete according to the following list and gure.
ö # $ % & '
( ) * + , -
3. / 0 1 2
Item Qty.
1 1 Drum module Millenium Rookie
2 4 Tom pad 1, Tom pad 2, Tom pad 3, Snare pad (7" each, Mesh Head)
3 2 Hi-hat pedal, Bass Drum pedal
4 3 Cymbal (Crash, Ride), Hi-hat pad (8" each)
5 1 Rack
6 2 Rack foot
7 2 Cymbal holder (Crash and Ride)
8 1 Hi-hat holder
9 1 Multiple cable for connecting the pads, cymbals and pedals to the drum module
10 5 Mounting clamp for the pads and the drum module
11 10 Fixing screw for the mounting clamp
12 1 Drum key
13 2 Mounting washer for Crash and Ride
14 2 Felt washer
15 1 Hi-hat nut
16 1 Power adapter
17 5 Cable tie
18 2 Assembly instructions, user manual
Scope of delivery
Rookie 5
E-Drum Set

3 Assembly
Overview
Mount the various elements in the specied sequence. The nal positions of the components are shown in the illustration below.
ö
#
##
#
$$
%%
%
1 Drum module Millenium Rookie
2 Tom pad 1, Tom pad 2, Tom pad 3, Snare pad (7" each, Mesh Head)
3 Hi-hat pedal, Bass Drum pedal
4 Cymbal (Crash, Ride, Hi-hat pad, 8" each)
Assembly
6Rookie
E-Drum Set

Assembling the rack
' '
&
1. Loosen the wing screws of the rack feet (6) and plug the rack feet onto the lateral supports of the rack (5).
2. Then tighten the wing screws of the rack feet (6).
-
-
1. Loosen the xing screws of the rack clamps on the three lateral crossbeams using the drum key (12) and turn the cross‐
beams into the desired playing position.
2. Then tighten the mounting screws with the drum key (12).
Assembly
Rookie 7
E-Drum Set

Mounting pads on the rack
-+,
,
#
#
1. Screw the pads (2) to the provided holes at the bottom side with two xing screws (11) and one mounting clamp (10) each.
Fixthe pads in the provided positions at the rack (5).
2. Align the pads on the rack to meet your needs, then tighten the xing screws (11) of the mounting clamps (10) evenly using
the drum key (12).
Assembly
8Rookie
E-Drum Set

Mounting the drum module on the rack
-
+, ,
1. Screw the drum module (1) to the provided holes at the bottom side with two xing screws (11) and one mounting clamp
(10). Fix the drum module in the provided position at the rack (5).
2. Align the drum module on the rack to meet your needs, then tighten the xing screws (11) of the mounting clamp (10)
evenly using the drum key (12).
Assembly
Rookie 9
E-Drum Set

Mounting cymbals on the rack
)
( (
1. Insert the brackets (7, 8) for the cymbals and the Hi-hat into the provided mounting clamps on the rack.
2. Fasten the brackets using the wing screws of the mounting clamps at the desired height.
)(
/
/
0
%%
.
1. Put as shown two felt washers (14), the Hi-hat pad (4) and the Hi-hat nut (15) on the bracket for the Hi-hat (8).
2. Tighten the Hi-hat nut (15) to fasten the Hi-hat.
3. Put as shown one cymbal pad (4) and one xing washer (13) on the bracket of the each cymbal (7).
4. Press the xing washers (13) tightly onto the head of the brackets to fasten the cymbal pads.
Assembly
10 Rookie
E-Drum Set