thomann swissonic basic router User manual

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected] DocID: 442579_06.05.2021
EN
Quick Start Guide
This quick start guide contains important information on the safe operation of
the product. Read and follow the safety advice and instructions given. Retain the
manual for future reference. If you pass the product on to others please include this
manual.
Bluetooth® Receiver
Safety instructions
Intended use
This device is used for wireless transmission of digital audio signals via Bluetooth®
and their conversion to analogue signals for further processing. Any other use or use
under other operating conditions is considered to be improper and may result in per-
sonal injury or property damage. No liability will be assumed for damages resulting
from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke! Never let children unattended use electri-
cal devices.
Incorrect handling of lithium batteries can result in injury
• In the event of a short circuit, overheating or mechanical damage, lithium batteries
can cause severe injuries.
• When handled correctly and appropriately lithium batteries pose no risk.
• Store lithium batteries in a cool, dry place, ideally in the original packaging.
• Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium
batteries are hermetically sealed. Never attempt to open a lithium battery.
• If the battery housing is damaged small amounts of the electrolyte may leak out. If
this should happen, seal the lithium battery in airtight packaging and wipe up the
traces of electrolyte using absorbent paper towels. You must wear protective rub-
ber gloves when doing so. Clean your hands and the aected surface thoroughly
with cold water.
• Never attempt to recharge non-rechargeable lithium batteries. When charging lit-
hium batteries you must use a suitable charging device intended for the purpose.
• Before disposing of the device remove the lithium batteries. Protect used lithium
batteries against potential short circuits, e.g. by covering the poles with adhesive
tape.
• Only use powder extinguishers or other suitable extinguishing agents to extingu-
ish a burning lithium battery.
Possible damage to lithium-ion batteries through incorrect storage
By deep discharge, lithium-ion batteries can be permanently damaged or lose
some of their capacity.
Before long breaks, charge the batteries to around 50 % of their capacity and then
switch o the device. Store the device at room temperature or cooler in an environ-
ment as dry as possible. If the batteries are stored for a longer period, recharge
them to 50 % every three months.
Fully charge the batteries only shortly before use at room temperature.
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic elds
Electromagnetic compatibility other electrical equipment
Using the device near radios or TV sets may cause interference. Then increase the
distance between the devices.
General handling
• To prevent damage, never use force when operating the switches and controls.
• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or ammable cleaning agents.
Keep foreign substances from the unit!
Keep the device away from containers with liquids. Should any liquid get into the
unit, this could lead to its destruction or re. Be sure not to let any metal objects
into the unit.
Operating elements
qMicro USB charging port
wOn / o switch
eXLR output, unbalanced
$ö#
Features
• Bluetooth® transmission system
• XLR output
• Built-in rechargeable battery
• Includes Micro USB charging cable

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected] DocID: 442579_06.05.2021
Using the product
1. Press the on / o switch (w) to turn on the unit.
2. If the LED ashes red, the built-in battery must be charged. To do this, connect
the device's micro USB charging port (q) to a USB power source using the
supplied charging cable. When the charging process is complete, the LED lights
green. Then disconnect the device from the USB power source.
3. When the LED is ashing green and red, the device is ready to connect to
a Bluetooth® enabled device, such as smart phone, tablet or the like. Then
establish the connection.
4. When connected, the LED is green.
5. Use a suitable cable to connect the XLR output (e) to the input of the device
that you want to use to process the line level signals.
6. Start the media playback on the audio source.
7. To switch o the device, press the on / o switch (w).
EN
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected
for recycling. Please follow the notes and markings on the packaging.
Batteries must not be thrown away or incinerated; they must be disposed of in
accordance with local regulations for the disposal of hazardous waste. Use the
existing collection points for this.
Dispose lithium batteries only in discharged condition. Remove replaceable
lithium batteries from the device before disposal. Protect used lithium batter-
ies from short circuits, for example by covering the poles with adhesive tape.
Permanently installed lithium batteries must be disposed of together with the
device. Please inquire about a suitable acceptance point.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your
local waste disposal facility.
Bluetooth® Receiver
Technical specications
Standby current <0.5mA
Sensitivity –80dBm <± 0.1%BER
Signal-to-noise ratio ≥75dB
Distortion ≤ 0.1%
Range (free eld) 10m
Battery Type Lithium polymer battery
Voltage 3.7V
Capacity 300mAh
Operating time 10 h
Charging time 1 h
Bluetooth® Frequency of operation 2.400 GHz ... 2.4835 GHz
Max. transmission power 10 mW
Standard Version 4.0
Dimensions (W×H×D) 125mm×32mm ×28mm
Weight 100g
Ambient conditions Temperature range 0 °C ... 40 °C
Relative humidity 20 % ... 80 % (non-condensing)
. . .
or
or