- Version du 10/06/2020 -
USAGE GUIDE
Connect the pump to the system.
When assembling the connections, use Teflon® and then tighten the connections but not
too much, holding the female part. The pump is self-priming.
Press the ON button on the circuit breaker (4).
Turn the rotation reversing switch (5) to 1or 2 depending on the selected direction of
pumping. The direction of rotation is to be determined by the customer.
If a problem occurs, press the red stop button (6) to cut off the power supply to the
motor.
To restart the pump: Slightly rotate the button clockwise to unlock it and then press the
ON button on the circuit breaker (4).
The pump can be disassembled simply by unscrewing the four wing nuts (7).
Vane Pump : User’s Guide 4/5
MAINTENANCE
CAUTION : Unplug the machine before any maintenance operation.
When cleaning the machine take care to protect the electric parts.
The pump can easily be cleaned with hot water.
For better results it is recommended to disassemble the lid when washing (7).
It is also possible to wash separately the vanes.
OFF switch
Manual operating switch
Rotation direction invertor
