Thor Broadcast F-M1SDI User manual

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
User Manua l
F-M1SD I
1-Channel Tx & Rx
HD-SDI Fiber Opt i c
Link with RS-485
User Manua l 2016

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
Table of Contents
1. Introduction
1.1 Overview............................................................................................................................................3
1.2 Features.............................................................................................................................................3
1.3 Applications .......................................................................................................................................4
2. Panel Descriptions
2.1 Front Panels.......................................................................................................................................5
2.2 Rear Panels ........................................................................................................................................6
3. Technical Specifications
3.1 Optical Specifications Table...............................................................................................................7
3.2 Electrical Specifications Table ...........................................................................................................8

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
1. Introduction
1.1 Overview
The F-M1SDI system by Thor is designed to extend the range of SDI digital video signals by transmitting the signals
over fiber cable. These units are compact and are suitable for a wide range of applications involving broadcast type
SD-SDI or HD-SDI video. They are available in a range of power levels to support transport distances from 10 to 80 km
when used with single mode fiber. In addition to SDI digital video, this system also provides 1 channel of RS-485 return
path data from the optical receiver back to the transmitter. This is ideal for controlling equipment such as video routers,
PTZ controllers, industrial equipment, or any SDI over Fiber signal up to 1.485GB/s.
1.2 Features
■ Zero latency or loss in video quality
■ Supports HD-SDI @ 1.485Gb/s (SMPTE-292M) and SD-SDI @ 270Mb/s (SMPTE-259M)
■ F-M1SDI-Tx: 1x SD/HD-SDI input on BNC
■ F-M1SDI-Rx: 1x SD/HD-SDI output on BNC
■ Supports up to 8 audio channels embedded in the SDI
■ Resolutions: 1080P@30,25,24, 1080I@60,50 an 720P@60,50,30,25,24
■ Integrated HD-SDI reclocker and cable equalizer
■ Link Alarm (NOP, No optical signal) indicators on both Tx and Rx
■ Reverse RS485 channel, half duplex, up to 115.2Kb/s baud rate
■ 12V DC power supply
■ Compact size: 93.2mm × 46.2mm × 29.6mm

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
1.3 Applications
Figure 1-3-1 Application without Serial
Figure 1-3-1 Application with
Serial

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
2. Panel Descriptions
2.1 Front Panels (Tx & Rx)
Figure 2-1-1 F-M1SDI-Tx Front Panel Figure 2-1-2 F-M1SDI-Rx Front Panel
Table 2-1-1 F-M1SDI Front Panel
I nterface
Descr i pt i on
OPT
Optical Fiber Interface, FC Type Connector
NOP
Optical signal loss alarm indicator (RED)
ON: Optical signal loss is detected on the fiber
OFF: The optical port has a positive fiber lock
LOCK
The HD-SDI input signal detect Indicator (GREEN)
ON: Connected normally, Signal Locked
OFF: Problem with SDI signal
VOUT
The HD-SDI Signal Output Indicator (GREEN)
ON: Output Functioning Normally
OFF: Problem with Output

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
2.2 Rear Panels (Tx & Rx)
Figure 2-2-1 F-M1SDI-Tx Rear Panel Figure 2-2- 2F-M1SDI-Rx Rear Panel
Table 2-2-1 F-M1SDI-Tx Rear Panel
Interface
Descr i pt i on
POWER
12V DC power input
RS485
A
RS485 positive terminal
B
RS485 negative terminal
HD/SDI IN
SD/HD-SDI video input
Table 2-2-2 F-M1SDI-Rx Rear Panel
Interface
Descr i pt i on
POWER
12V DC power input
RS485
A
RS485 positive terminal
B
RS485 negative terminal
HD/SDI IN
SD/HD-SDI video output

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
3. Technical Specifications
3.1 Optical Specifications Table
I tem
Description
F-M1SDI-Tx optical interface
Wavelength(nm)
Tx:1310FP
Rx:1550
Tx:1310FP
Rx:1550
Tx:1550DFB
Rx:1310
Tx:1550DFB
Rx:1310
Tx:1550DFB
Rx:1310
Transmission distance (Km)
10
20
40
60
80
Optical Launch Power (dBm)
-9~-3
-6~-1
-7~-2
-5~0
-2~+3
Fiber Connector Type
FC
FC
FC
FC
FC
Maximum Sensitivity (dBm)
-32
-32
-33
-36
-37
F-M1SDI-Rx optical interface
Wavelength(nm)
Tx:1550FP
Rx:1310
Tx:1550FP
Rx:1310
Tx:1310FP
Rx:1550
Tx:1310FP
Rx:1550
Tx:1310vFP
Rx:1550
Transmission distance (Km)
10
20
40
60
80
Optical Launch Power (dBm)
-14~-7
-14~-7
-8~-3
-5~0
0~+5
Fiber Connector Type
FC
FC
FC
FC
FC
Maximum Sensitivity (dBm)
-21
-21
-24
-24
-26
Note: Unless otherwise specified, the default optics are for 20 km. For longer transport distances please specify
model at time of ordering.

Thor Fiber 2016
TEL: [phone]
EMAIL: [email protected]
http://www.thorbroadcast.com
3.2 Electrical Specifications Table
SDI Interface
Connector
BNC
Bit rate
1.485 Gb/s and 270 Mb/s auto switching
Impedance
75Ω
Return loss
>15dB
Level
800mVp-p±10%
Rise and fall time ( HD-SDI ）
≤270ps
Rise and fall time （ SD-SDI ）
≤1.50ns
SD-SDI Alignment jitter (1KHz)
≤0.2UI
SD-SDI Timing jitter (10Hz)
≤0.2UI
HD-SDI Alignment jitter
(100KHz)
≤0.2UI
Standard
Compliant with SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard
RS485 Interface
Connector
Terminal Block Connector
Baud rate
0~115.2Kb/s
Bit error ratio
< 10
-9
Work mode
Half-duplex
Power and Consumption
Power supply
DC12V
Range
8V~14V
Power consumption
1.5W±10%
Environment Requirements
Working temperature
-30～+60℃
Relative Humidity
≤95％(no condensation)
Storage temperature
-40～85℃
Equipment Dimensions
Equipment dimension
93.2mm × 46.2mm × 29.6mm