Thor Digital HDV-S001 User manual

3G SDI toHDMI Box
OperationManual

1
:Introduction
TheSDI to HDMI converter allows SD-SDI, HD-SDI and3G-SDI signalsto be shownonHDMI/SDI
displays whileensuring high bitrates of 2.970 Gbit/s to give you fast signaltransmission withoutany loss.
For professionalsthismeansthat itis now easier to distribute andextend your3GSDIsignalwhilegiving
you theability to display yourworkonHDMI displays thanks tothebuilt inHDMI converter. Furthermore,
thanks to theloop-through3G-SDI design, users are ableto enjoy bothSDI andHDMI displays at the
same time.
Ⅱ: Applications
Connect to multipledisplays by linkingone3G SDIExtenderto another through itsSDI outputport.
Whenconnectedto another 3G SDI Extender, you can broadcast asignalto two HDMI displays andone
SDI display,or connectto another Extender to provide more connectionsandalonger operating
distance.
Convert 3G SDI to HDMI

2
Ⅲ:Features
Operationat 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s
Supports SMPTE 425M (LevelA and LevelB), SMPTE 424M, SMPTE 292M, SMPTE 259M-C
Equalized and re-clocked loop output Integrated audio de-embedder for a maximum of 8 channel,
48 kHzaudio
Autovideo mode detection (3G/SD/HD)
Conversionfrom SMPTE 425M levelB toLevelA 1080p 50/59.94/60 4:2:2 10-bit
Connect withother units to extend your signalover long distances
Simultaneousdisplay withSDI and HDMIsignals
Supportssignaltransmissiondistances of upto 300M for SDI signals, 200M for HD signalsand100M
for 3G signals
Note: Cable tested withBelden1694A. Operating distances may vary if used withanothertype of cable.

3
Ⅳ:Package
3G SDI to HDMI Box-----------------------------------------1PCS
5V DC Power SupplyAdaptor-----------------------------1PCS
OperationManual--------------------------------------------1PCS
V:Specification
SMPTE Standard 425M LevelA & B, 424M, 292M, 259M-C
SDI TransmissionRates 2.970 Gbit/s and 2.970/1.001 Gbit/s
Frequency Bandwidth 225MHz/link (HDMI 1.3)
In/Output Support
Resolution
480I,576I,720p@50/59.94,60;
1080I@50/59.94/60
1080P@23.98/24/25/29.97/30/50/59.94/60

4
1080PsF@23.98/24/25/29.97/30
InputPort 1 xBNC (SDI/HD-SDI/3G-SDI)
Output Port 1 xBNC (SDI/HD-SDI/3G-SDI),1xHDMI,
Power Supply 5V DC/ 2A
ESD ProtectionHuman
body model
±8kV (air-gap discharge)
±4kV (contact discharge)
SDI Cable Distance 3G up to 100M (BELDEN 1694A);
HD up to 200M (BELDEN 1694A)
SD up to 300M (BELDEN 1694A)
Dimension(mm) 100(W) x65(D) x25(H) mm
Weight (g) 250g

5
VI:Operation Controls and Functions
Front Panel Rear Panel
(1) DC 5V:Plugthe5V DCpower supplyinto the unitandconnecttheadaptor to anAC outlet. Thered
LED willturnonwhenthe power is on.
(2) Power LED: This red LEDwillswitchonwhenthe device is connected withthe power supply.
(3) HDMI Out: This slot is where youconnect a HDMI / DVI display witha HDMI or HDMI to DVI cable to.
(4) SDI IN: This slot is where youconnectthe SDI source to, inorder to send a SDI signalto a display.
(5) SDI OUT: Thisslot iswhere youconnect theSDI display to, withanSDI cablefor displayingimages.

6
Connect itto another SDI to HDMI converter/ extender to extendyoursignalor connectto multiple
displays.
VII:Connection and Installation