threeposts DD-QHB4250-1CR Instruction sheet

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 1
DD-QHB4250-1CR/DD-QHB4250-2LG
Queen Upholstered Headboard
Product Instructions for:

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 2
DD-QHB4250-1CR/DD-QHB4250-2LG
Queen Upholstered Headboard
Before beginning assembly, separate all parts and carefully study the parts
diagrams below. Review all parts and hardware before disposing of any
packaging. You may receive extra hardware with your unit. Call Customer
Service for missing hardware.
Before beginning assembly, separate all parts and carefully study the parts
A：Headboard Cushion (1)
B：Wing (2)
C：Right Leg (1)
D: Left Leg (1)
1：Allen Wrench (1)
2：Bolt Dia. 1/4x2” (8)
3：Bolt Dia. 1/4x2-3/8 (6)
4：Flat Washer (14)
5：Spring Washer (14)
Parts list

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 3
DD-QHB4250-1CR/DD-QHB4250-2LG
Queen Upholstered Headboard
Figure 1
Step 1
Unpack and lay parts on a clean,
padded surface like a carpet or
blanket. Check that you have all
parts indicated on the front page.
Lift the velcro strip cover found on
Headboard Cushion (A) and take
out Left Leg (D) and Right Leg
(C).
Close the velcro strip cover.
Figure 2
Step 2
Lift the velcro strip cover found on
Headboard Cushion (A).
Attach Wings (B) to Headboard
Cushion (A) as shown in Figure 2.
Use Bolt (3) with Spring Washer
(5) and Flat Washer (4) to
connect the Wings (B) to
Headboard Cushion (A).
Tighten Bolts (3) using Allen
Wrench (1)
Close the velcro strip cover
Assembly Instructions
B
B
B
B

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 4
Figure 3
Step 3
Attach Left Leg (D) and Right
Leg (C) to back of Headboard
Cushion (A) as shown in
Figure 3.
Use Bolts (2), Spring
Washers (5) and Flat
Washers (4) to connect the
Left Leg (D) and Right Leg
(C) to Headboard Cushion
(A).
Tighten Bolts (2) using Allen
Wrench (1)
Figure 4
Step 4
Double check to be sure that
Bolts (2) and Bolts (3) are
securely tightened.
Now your Queen Headboard
is ready to use!
A
B
B