THUNDER TIGER 2ADKO-A-8-200 User manual

Description
Product Contents
5.8GHz AV Transmitter
user manual V1.0
Thanks for purchasing our 5.8GHz AV transmitter. This AV transmitter use clean
5.8GHz power in a micro size and light weight. The shell of the transmitter is make of
aluminium alloy, so that it can assure the less noise and firmer quality. Owe to the new
IC with dense integration, it keep the minute extension and the low power consumption.
Specification
Power supply: 2S~6S LiPo (Use power wire)
Frequency: 5.8GHz
Available Channel: 8CH
Antenna Connector: SMA
Dimension: 30.5*40.5*10mm
Channel Number
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Frequency
5733 Mhz
5752 Mhz
5771 Mhz
5790 Mhz
5809 Mhz
5828 Mhz
5847 Mhz
5866 Mhz
Channel Table
AV cableMainframe Antenna
Power wire

JC7407
FCC ID: 2ADKO-A-8-200
1Channel switch, 3-bit switch can switch to the all channel between 1 to 8
23 pin slot for power supply and AV input
3Antenna connector
CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
123
123
123
123
123
123
123
123
AV Transmitter
5.8GHz
Show Switch Position
FCC ID: 2ADKO-A-8-200
3
2
Operation diagram
1
1Connect the antenna with the SMA connector.
2Insert the 3-pin slot with The DC-5V power
and AV in signal, or you can connect to
OSD system directly(＃8034)
Installation
GND
AV IN
AV IN
+5V
GND
GND
AV IN
Battery
1
2
Connect to MORPHEUS H3D-360 gimbal (#AP0003)
Distribution
North America
Distributed by / Vertrieb :
THUNDER TIGER EUROPE GmbH,
Rudolf-Diesel-Str. 1, 86453 Dasing, Germany
For customer service please contact
[email protected]
Germany, Netherlands, Belgium,
Luxembourg, Austria, Italy Distributed by :
Thunder Tiger Corporation
No.7 6th Road, Industry Park,
Taichung, Taiwan 40755
For customer service please contact
[email protected]
Tel : [phone]
For Other Countries
Distributed by :
HRP Distributing
2034 South 3850 West Salt Lake City,
UT 84104 USA
For customer service please contact
[email protected]
[email protected]
Tel : [phone]
Attn : TT Support