Stroboframe • Stroboframe
SLIM, LIGHT
AND FAST
Pro-T and
Press-T
Our lightest, fastest,
professional brackets.
The Pro-T and Press-T are flash-
rotating brackets. Both are light,
compact and fast-handling. The flash
arm swings to keep the flash
centered over the lens for both
horizontal and vertical compositions.
These brackets do not require the use
of a cable release.
Unlike conventional brackets,
the Pro-T is designed for you to
hold the camera rather than the
bracket, providing a more natural
way of shooting. It allows you to
switch between horizontal and
vertical compositions instantly.
The Press-T is a slightly
shorter and even more compact
version of the Pro-T. It is popular
with photojournalists and other
shooters who work out of a
camera bag.
Features:
• Pivoting, machined flash arm
keeps the flash centered above the
lens for both horizontal and vertical
compositions.
• Solid, machined aluminum
components combine to provide
lightweight, superior rigidity and
extraordinary balance.
• Integral QR (Quick-Release) Plate
mates to optional QR Receiver,
allowing the bracket and tripod to be
attached or detached instantly.
• Pro-T incorporates 3°downward
flash tilt for both horizontal and
vertical compositions. This improves
lighting coverage for typical flash
shooting distances.
• Fully compatible with cameras
with accessory battery packs or
motor drives.
• Accepts all Stroboframe flash
mounts, Camera Anti-Twist Plates*
and Quick-Release (QR) accessories.
Pro-T and Pro-T/m
Specifications
Net Weight:
14 oz.
Bracket Height:
9.25"
Nominal Lens-to-Flash Distance:
12"
Includes:
1/4"-20 camera mounting
screw & flash mounting knob, cork
base pad, flash arm adjustment
wrench
Suggested Accessories:
Camera
Anti-Twist Plates (not required for
Pro-T/m), Flash Mounts, Camera
and Flash Quick Releases
Catalog Number:
310-800 (Pro-T)
Catalog Number:
310-807 (Pro-T/m)
Press-T Specifications
Net Weight:
11 oz.
Bracket Height:
7.0"
Nominal Lens-to-Flash Distance:
10"
Includes:
1/4"-20 camera mounting
screw & flash mounting knob, cork
base pad, flash arm adjustment
wrench
Suggested Accessories:
Camera
Anti-Twist Plates, Flash Mounts,
Camera and Flash Quick Releases
Catalog Number:
310-810
Pro-T/m
*
Note: When using Pro-T or Press-T
model brackets with heavier flash
units, we consider the use of a Camera
Anti-Twist Plate mandatory
(the Pro-T/m has this feature built in).
Brackets shown with
optional flash mount
(Shoe Mount 300-SHO)
EVEN MORE
COMPACT
Pro-T
We also offer the Pro-T/m, a model
made specifically for the Mamiya 6,
6MF and 7 rangefinder cameras.
The base is configured to allow full
access to all Mamiya baseplate
controls. You can load film and
change lenses easily without
removing the camera from the
bracket! This bracket also has a
built-in camera anti-twist system.
For Mamiya
Brackets for Cameras with Built-in
or Accessory Grips
