Tilia Silva User manual

ASSEMBLY GUIDE
Lounge Set Silva
Content
a) c)
h)
g) i)
k)
d)
e)
f)
J)
l)
4 pcs. Backrest b) 4 pcs. Seat 1 pcs. Table Base
1 pc. Middle Connection
Part
3 pc. Left Arm
3 pc. Right Arm 4 pcs. Table Leg
4 pcs Front
Connection Part
4 pcs. Back Connection
Part
52 pcs. Screw
1 pc. Allen
4 ad. Table Leg
Extender (Optional)
1 pc. Table Middle
Connection Part
Place table legs into the middle connection
part as shown on figure.
Place the table leg gently to the slots
available on table base.
1
2

Please use the allen provided in the box while tightening plastic screws. Do not over-tighten it it might break the connection port.
Place the left and right arm parts upright and
parallel to each other.
1
3
4
5
Place the rear connection part to
the slots available in the back
of the arm parts, then twist to lock.
Place the seat part from the top.
Make sure the mounting holes
match. Then mount the part gently
with the plastic screws available.
Then place the backrest to the seat.
Make sure the mounting holes match.
Then mount the part gently with the
plastic screws available.
2Place the front connection part
to the arm parts.