Timbren FRTR250 User manual

FRTR250
FRTR250
FORD
INSTALLATION INSTRUCTIONS
Rear suspension package
a) Raise vehicle allowing the axle to hang
freely.
b) Remove existing bump stop.
c) Assemble Aeon rubber spring and
bracket as shown in the adjacent
diagram.
d) Mount Timbren assembly using existing
holes & Timbren supplied fasteners.
e) Lower vehicle.
NOTES
Check that brake line or brake cable
locations do not interfere with Aeon
spring.
If necessary, use rubber washer #2 &
bolt #5 may be used to achieve desired
ride height.
If OEM vehicle has a peg style casting
as shown, Timbren Aeon® rubber
spring is designed to contact peg. Do
not remove OEM peg.
Do not exceed vehicle manufacturer’s recom-
mended axle weight rating. Check for AEON®
interference with vehicle components - Under
load AEON® will “expand” in diameter.
03/31/15
Ref. = Reference
Part = Part #.
Qty. = Quantity
1
2
4M10 x 60
3
Ref Part Qty
1 K10086-003 2
2 A25723-90AH00 2
3 A00545-55Q30 2
4 F11542-750 2
5 F11548-350 2
5
M10 x 90

FRTR250
PART NUMBER DESCRIPTION QTY LOCATION
F11542-750 HCS M10 x 60 x 1.5 F/T Gr 8.8 Z 2I2D
F11548-350 HCS M10 x 90 x 1.5 x Gr 8.8 Z 2I2C
A00545-55Q30 HOLLOW RUBBER SPRING 2C9D
A25723-90AH00 RUBBER SPACER 4"od x 1" thk w/ AH Bushing 2
K10086-003 DDR1004 / GMRJB WELDMENT PTD. 2 D11B
B90200-CR SMALL REAR BOX - 9.5 x 7 x 5.5 1 A--D
B10000 8" x 12" BUBBLE FOR KITS 1
B00029-010 BARCODE LABEL FOR KIT 1
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Rely only on high-grade suspension parts offered on our virtual shelves.