TimeKeeping GUARD1 User manual

©2014 by TimeKeeping Systems, Inc.
www.guard1.com
GUARD1/tracking
Wristband Tag

©2014 by TimeKeeping Systems, Inc.
www.guard1.com
The Guard1 Tracking Wristband Tag (TAG-002) is a completely sealed and reusable device with a long
life battery. It is worn on the wrist of individuals to be tracked within facilities utilizing the Guard1
Tracking system.
To use Guard1 Tracking Wristband Tags you will need:
One-time use Guard1 Tracking Wristband Material
oRoll of 200 feet
or
oPrecut Guard1 Tracking Wristband Strap
Guard1 Tracking Wristband Clasp Kit
Guard1 Tracking Wristband Clasp Crimping Tool
Instructions:
To apply a Guard1 Tracking Wristband Tag to an individual, please refer to the application
instructions provided with the wristband material, clasp kit, and crimping tool.
It is also possible to use the Guard1 Tracking Wristband Tags with third party wristbands. Please
refer to the manufacturer’s instructions.
To remove the Guard1 Tracking Wristband Tag, cut the wristband. The Guard1 Tracking
Wristband Tag may be reused during the useful life of the battery.

©2014 by TimeKeeping Systems, Inc.
www.guard1.com
FCC Statements:
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by TimeKeeping Systems, Inc. could void the user's
authority to operate the equipment.
This device is exempt from SAR Evaluation, per §4.3.1 of KDB 447498.
Industry Canada Statements:
English
French
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
This device is exempt from SAR Evaluation, per
RSS-102 §2.5.1.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le
fonctionnement.
Cet appareil est exempt de l'évaluation SAR, selon
RSS-102 §2.5.1.